Snapshot non funzionanti

Forum italiano degli utenti MX
Forum rules
Post Reply
Message
Author
margiatec
Posts: 18
Joined: Sun Feb 12, 2023 5:19 am

Snapshot non funzionanti

#1 Post by margiatec »

Ciao a tutti,
ci sto impazzendo dopo aver configurato il mio mx 21, un sacco di lavoro, le snapshot fatte non si avviano (fa le prime sritte e poi trattino lampegiante a sinistra in alto a vita), se reinstallo MX funziona, qualcosa si e' rovinato ma ci ho perso un mese a trovare la quadra, qualcuno mi darebbe una mano a capire perche' non si avviano?
Grazie 1000 a chi vorra' indagare con me

P.s
Ho gia' provato a disinstallare e reisntallere il pacchetto snapshot
Top
margiatec
Posts: 18
Joined: Sun Feb 12, 2023 5:19 am

Re: Snapshot non funzionanti

#2 Post by margiatec »

ciao, se puo' essere utile ,dopo aver selezionatol'avvio, leggo subito" can't find a squashfs superblock xxxx...."
Nessuno mi puo' aiutare ?
Grazie 1000
Top
Huckleberry Finn

Re: Snapshot non funzionanti

#3 Post by Huckleberry Finn »

Il driver Nvidia è stato installato?

(Tuttavia, questo messaggio non è correlato a questo.)
Top
margiatec
Posts: 18
Joined: Sun Feb 12, 2023 5:19 am

Re: Snapshot non funzionanti

#4 Post by margiatec »

credo di si , ma come posso darti conferma? Qualche comando o log da fare?
La cosa strana e' che reinstallando e poi cambiando solo poche cose nella scrivania funziona tutto e riappare il mio Mx salvato in snapshot che si avvia, ma ci ho perso un mese e mezzo per settarmelo , perdo tutto e se poi ricapita ...:(
Grazie per tua gentile risposta
Top
Huckleberry Finn

Re: Snapshot non funzionanti

#5 Post by Huckleberry Finn »

Code: Select all

inxi -Ga
Top
margiatec
Posts: 18
Joined: Sun Feb 12, 2023 5:19 am

Re: Snapshot non funzionanti

#6 Post by margiatec »

$ inxi -Ga
Graphics: Device-1: NVIDIA GK208B [GeForce GT 710] driver: nvidia v: 470.161.03 bus-ID: 01:00.0
chip-ID: 10de:128b class-ID: 0300
Device-2: Logitech HD Webcam C525 type: USB driver: snd-usb-audio,uvcvideo
bus-ID: 1-2:3 chip-ID: 046d:0826 class-ID: 0e02 serial: 2E0C0FA0
Display: x11 server: X.Org 1.20.11 compositor: xfwm4 v: 4.18.0 driver: loaded: nvidia
unloaded: fbdev,modesetting,nouveau,vesa alternate: nv display-ID: :0.0 screens: 1
Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x286mm (20.0x11.3")
s-diag: 583mm (23")
Monitor-1: HDMI-0 res: 1920x1080 hz: 60 dpi: 82 size: 598x336mm (23.5x13.2")
diag: 686mm (27")
OpenGL: renderer: NVIDIA GeForce GT 710/PCIe/SSE2 v: 4.6.0 NVIDIA 470.161.03
direct render: Yes

Code: Select all

System:    Kernel: 5.10.0-21-amd64 [5.10.162-1] x86_64 bits: 64 compiler: gcc v: 10.2.1 
           parameters: BOOT_IMAGE=/boot/vmlinuz-5.10.0-21-amd64 
           root=UUID=<filter> ro quiet splash 
           Desktop: Xfce 4.18.1 tk: Gtk 3.24.24 info: xfce4-panel wm: xfwm 4.18.0 vt: 7 
           dm: LightDM 1.26.0 Distro: MX-21.3_x64 Wildflower September 18  2022 
           base: Debian GNU/Linux 11 (bullseye) 
Machine:   Type: Desktop Mobo: ASRock model: 970M Pro3 serial: <filter> 
           UEFI-[Legacy]: American Megatrends v: P1.60 date: 06/17/2016 
CPU:       Info: Quad Core model: AMD FX-4300 bits: 64 type: MCP arch: Bulldozer family: 15 (21) 
           model-id: 2 stepping: 0 microcode: 6000852 cache: L2: 2 MiB 
           flags: avx lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm bogomips: 30333 
           Speed: 3401 MHz min/max: 1400/3800 MHz boost: enabled Core speeds (MHz): 1: 3401 
           2: 3637 3: 1590 4: 1536 
           Vulnerabilities: Type: itlb_multihit status: Not affected 
           Type: l1tf status: Not affected 
           Type: mds status: Not affected 
           Type: meltdown status: Not affected 
           Type: mmio_stale_data status: Not affected 
           Type: retbleed mitigation: untrained return thunk; SMT vulnerable 
           Type: spec_store_bypass 
           mitigation: Speculative Store Bypass disabled via prctl and seccomp 
           Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization 
           Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, STIBP: disabled, RSB 
           filling, PBRSB-eIBRS: Not affected 
           Type: srbds status: Not affected 
           Type: tsx_async_abort status: Not affected 
Graphics:  Device-1: NVIDIA GK208B [GeForce GT 710] driver: nvidia v: 470.161.03 bus-ID: 01:00.0 
           chip-ID: 10de:128b class-ID: 0300 
           Device-2: Logitech HD Webcam C525 type: USB driver: snd-usb-audio,uvcvideo 
           bus-ID: 1-2:3 chip-ID: 046d:0826 class-ID: 0e02 serial: <filter> 
           Display: x11 server: X.Org 1.20.11 compositor: xfwm4 v: 4.18.0 driver: loaded: nvidia 
           unloaded: fbdev,modesetting,nouveau,vesa alternate: nv display-ID: :0.0 screens: 1 
           Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x286mm (20.0x11.3") 
           s-diag: 583mm (23") 
           Monitor-1: HDMI-0 res: 1920x1080 hz: 60 dpi: 82 size: 598x336mm (23.5x13.2") 
           diag: 686mm (27") 
           OpenGL: renderer: NVIDIA GeForce GT 710/PCIe/SSE2 v: 4.6.0 NVIDIA 470.161.03 
           direct render: Yes 
Audio:     Device-1: AMD SBx00 Azalia vendor: ASRock driver: snd_hda_intel v: kernel 
           bus-ID: 00:14.2 chip-ID: 1002:4383 class-ID: 0403 
           Device-2: NVIDIA GK208 HDMI/DP Audio driver: snd_hda_intel v: kernel bus-ID: 01:00.1 
           chip-ID: 10de:0e0f class-ID: 0403 
           Device-3: Logitech HD Webcam C525 type: USB driver: snd-usb-audio,uvcvideo 
           bus-ID: 1-2:3 chip-ID: 046d:0826 class-ID: 0e02 serial: <filter> 
           Sound Server-1: ALSA v: k5.10.0-21-amd64 running: yes 
           Sound Server-2: PulseAudio v: 14.2 running: yes 
           Sound Server-3: PipeWire v: 0.3.19 running: no 
Network:   Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet vendor: ASRock 
           driver: r8169 v: kernel port: d000 bus-ID: 05:00.0 chip-ID: 10ec:8168 class-ID: 0200 
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter> 
           Device-2: TP-Link TL-WN823N v2/v3 [Realtek RTL8192EU] type: USB driver: rtl8xxxu 
           bus-ID: 1-4:5 chip-ID: 2357:0109 class-ID: 0000 serial: <filter> 
           IF: wlan0 state: down mac: <filter> 
Drives:    Local Storage: total: 2.54 TiB used: 502.44 GiB (19.3%) 
           ID-1: /dev/sda maj-min: 8:0 vendor: Crucial model: CT480BX500SSD1 size: 447.13 GiB 
           block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s type: SSD serial: <filter> 
           rev: 056 scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to generate data. 
           ID-2: /dev/sdb maj-min: 8:16 vendor: Seagate model: ST2000DL003-9VT166 size: 1.82 TiB 
           block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s type: HDD rpm: 5900 
           serial: <filter> rev: CC32 scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to generate data. 
           ID-3: /dev/sdc maj-min: 8:32 vendor: Maxtor model: STM3250310AS size: 232.89 GiB 
           block-size: physical: 512 B logical: 512 B speed: 1.5 Gb/s type: N/A serial: <filter> 
           rev: C scheme: MBR 
           SMART Message: Unknown smartctl error. Unable to generate data. 
           ID-4: /dev/sdd maj-min: 8:48 type: USB model: USB PHILIPS size: 58.59 GiB block-size: 
           physical: 512 B logical: 512 B type: N/A serial: <filter> rev: 0000 scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
Partition: ID-1: / raw-size: 124.96 GiB size: 122.44 GiB (97.98%) used: 35.68 GiB (29.1%) fs: ext4 
           block-size: 4096 B dev: /dev/sda4 maj-min: 8:4 
Swap:      Alert: No swap data was found. 
Sensors:   System Temperatures: cpu: 22.0 C mobo: N/A gpu: nvidia temp: 41 C 
           Fan Speeds (RPM): N/A gpu: nvidia fan: 30% 
Repos:     Packages: note: see --pkg apt: 2881 lib: 1494 flatpak: 0 
           No active apt repos in: /etc/apt/sources.list 
           Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list 
           1: deb http://deb.debian.org/debian bullseye-updates main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/debian.list 
           1: deb http://deb.debian.org/debian bullseye main contrib non-free
           2: deb http://security.debian.org/debian-security bullseye-security main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/google-chrome.list 
           1: deb [arch=amd64] https://dl.google.com/linux/chrome/deb/ stable main
           Active apt repos in: /etc/apt/sources.list.d/google-earth-pro.list 
           1: deb [arch=amd64] http://dl.google.com/linux/earth/deb/ stable main
           Active apt repos in: /etc/apt/sources.list.d/mx.list 
           1: deb http://it.mxrepo.com/mx/repo/ bullseye main non-free
           Active apt repos in: /etc/apt/sources.list.d/skype-stable.list 
           1: deb [arch=amd64] https://repo.skype.com/deb stable main
           Active apt repos in: /etc/apt/sources.list.d/spotify.list 
           1: deb http://repository.spotify.com stable non-free
           Active apt repos in: /etc/apt/sources.list.d/teamviewer.list 
           1: deb [signed-by=/usr/share/keyrings/teamviewer-keyring.gpg] https://linux.teamviewer.com/deb stable main
Info:      Processes: 263 Uptime: 4m wakeups: 1 Memory: 15.61 GiB used: 2.14 GiB (13.7%) 
           Init: SysVinit v: 2.96 runlevel: 5 default: 5 tool: systemctl Compilers: gcc: 10.2.1 
           alt: 10 Client: shell wrapper v: 5.1.4-release inxi: 3.3.06 
Boot Mode: BIOS (legacy, CSM, MBR)
Top
Huckleberry Finn

Re: Snapshot non funzionanti

#7 Post by Huckleberry Finn »

Brevemente: Se si dispone di una scheda Nvidia e si installa il driver proprietario nvidia (il programma "Nvidia Driver Installer" è quello consigliato), e poi si esegue un'istantanea:

Quando si avvia l'USB è necessario utilizzare il parametro:

Code: Select all

xorg=nvidia
Altrimenti ci sarà una schermata nera.
Top
Huckleberry Finn

Re: Snapshot non funzionanti

#8 Post by Huckleberry Finn »

sì :

Graphics: Device-1: NVIDIA GK208B [GeForce GT 710] driver: nvidia v: 470.161.03 bus-ID: 01:00.0 chip-ID: 10de:128b class-ID: 0300
...
Display: x11 server: X.Org 1.20.11 compositor: xfwm4 v: 4.18.0 driver: loaded: nvidia
Last edited by Huckleberry Finn on Fri Mar 17, 2023 9:53 am, edited 1 time in total.
Top
margiatec
Posts: 18
Joined: Sun Feb 12, 2023 5:19 am

Re: Snapshot non funzionanti

#9 Post by margiatec »

Grazie ma dove e quando devo metterlo?
Top
Huckleberry Finn

Re: Snapshot non funzionanti

#10 Post by Huckleberry Finn »

Boot Options: ... .. xorg=nvidia ...

Enter.

https://i.ibb.co/Pg7hkz5/MX-Boot-Screen ... ession.jpg
Top
Post Reply

Return to “Forum Italiano”