MX-18 beta 1 feedback

Message
Author
User avatar
richb
Administrator
Posts: 10322
Joined: Wed Jul 12, 2006 2:17 pm

Re: MX-18 beta 1 feedback

#331 Post by richb »

dolphin_oracle wrote: Tue Dec 11, 2018 1:35 pm
darth.severus wrote: Tue Dec 11, 2018 1:33 pm Hi, I need to decide what to install. Has it any disadvantages to install MX-17.1 instead waiting for MX-18. Since there is no new Debian.
Also, can someone who tested MX-18 beta as a new install please point out how the system encryption per installer is working now. Will boot be encrypted?

I had no problem installing with encryption MX 18 b1 64 bit. (less the /boot partition as do indicated.)
Forum Rules
Guide - How to Ask for Help

richb Administrator
System: MX 23 KDE
AMD A8 7600 FM2+ CPU R7 Graphics, 16 GIG Mem. Three Samsung EVO SSD's 250 GB

User avatar
Hierax_ca
Posts: 64
Joined: Sun Nov 08, 2015 6:46 pm

Re: MX-18 beta 1 feedback

#332 Post by Hierax_ca »

Thinkpad 600x (1999-2001)

Display Color and Audio Sound issues persist (started with antix-17 and mx-17, works properly with MX-14.4 and 16.1):

Color Problem:
- colors display as inverted/opposite -- e.g., yellow=purple, blue=green. Note: this problem doesn't happen in AntiX-core cli console interface, issue occurs only with xorg running.

$ inxi -Gxxx

Code: Select all

Graphics:
  Device-1: Neomagic NM2360 [MagicMedia 256ZX] vendor: IBM ThinkPad 600X 
  driver: N/A bus ID: 01:00.0 chip ID: 10c8:0006 
  Display: x11 server: X.Org 1.19.2 driver: vesa resolution: 1024x768~61Hz 
  OpenGL: renderer: llvmpipe (LLVM 7.0 128 bits) v: 3.3 Mesa 18.2.6 compat-v: 3.1 
  direct render: Yes 
Color Solution:
- sudo nano on /etc/X11/xorg.conf
- changed color depth to 16-bit by adding last line: "DefaultDepth 16"

Is there a way to have the color depth detected on install and change this automatically or semi-manually with an Fn button option in the Live boot or installer? Or some MX tool for low color resolution? Or something to get color displaying properly on ancient computers like this? Was whatever that did this before (with MX-14.4 and -16.1) removed?

Sound Problem:
- MX Select Sound: "No sound cards/devices were found"

Before Fix
$ inxi -Axxx

Code: Select all

Audio:
  Device-1: Cirrus Logic CS 4614/22/24/30 [CrystalClear SoundFusion Audio 
  Accelerator] 
  vendor: IBM ThinkPad 600X/A20m driver: N/A bus ID: 00:06.0 chip ID: 1013:6003 
  Sound Server: ALSA v: k4.19.0-1-686-pae 
Sound Solution (manual):
- download latest old firmware: ftp://ftp.alsa-project.org/pub/firmware ... 29.tar.bz2 (2015-02-20)
- right click in Thunar extract here
- copy cs46xx folder
- open Root Thunar
- paste to /lib/firmware/
- open terminal "sudo modprobe -r snd-cs46xx" then "sudo modprobe snd-cs46xx"

Could this cs46xx firmware be included in the 32-bit .iso (or an MX tool created that could extract and paste the needed driver)? There are also numerous other old sound cards here in the file that might help other people with really old laptops.

After Fix:
$ inxi -Axxx

Code: Select all

Audio:
  Device-1: Cirrus Logic CS 4614/22/24/30 [CrystalClear SoundFusion Audio 
  Accelerator] 
  vendor: IBM ThinkPad 600X/A20m driver: snd_cs46xx v: kernel bus ID: 00:06.0 
  chip ID: 1013:6003 
  Sound Server: ALSA v: k4.19.0-1-686-pae 

Full inxi
sudo inxi -v8 -z

Code: Select all

System:    Host: mx1 Kernel: 4.19.0-1-686-pae i686 bits: 32 compiler: gcc v: 6.3.0 Desktop: Xfce 4.12.3 
           tk: Gtk 2.24.31 info: xfce4-panel wm: xfwm4 dm: LightDM 1.18.3 
           Distro: MX-18b1_386 Continuum December 3  2018 base: Debian GNU/Linux 9 (stretch) 
Machine:   Type: Laptop System: IBM product: 26468EU v: N/A serial: <filter> Chassis: type: 10 
           serial: N/A 
           Mobo: IBM model: 26468EU serial: <filter> BIOS: IBM v: ITET55WW date: 11/30/1999 
Battery:   ID-1: BAT0 charge: 43.3 Wh condition: 45.4/45.4 Wh (100%) volts: 11.8/10.8 
           model: IBM Corporation ThinkPad Battery type: Li-ion serial: N/A status: Unknown 
Memory:    RAM: total: 494.6 MiB used: 234.3 MiB (47.4%) 
           Array-1: capacity: 768 MiB note: est. slots: 3 EC: None max module size: 256 MiB 
           Device-1: DIMM 0 size: 64 MiB info: single-bank speed: type: Other detail: synchronous 
           bus width: 64 bits total: 64 bits manufacturer: N/A part-no: N/A serial: N/A 
           Device-2: DIMM 1 size: 256 MiB info: double-bank speed: type: Other detail: synchronous 
           bus width: 64 bits total: 64 bits manufacturer: N/A part-no: N/A serial: N/A 
           Device-3: DIMM 2 size: 256 MiB info: double-bank speed: type: Other detail: synchronous 
           bus width: 64 bits total: 64 bits manufacturer: N/A part-no: N/A serial: N/A 
PCI Slots: Slot: Adapter 0, Socket 0 type: 32-bit PC Card (PCMCIA) CardBus Slot 1 status: Available 
           length: Other 
           Slot: Adapter 0, Socket 1 type: 32-bit PC Card (PCMCIA) CardBus Slot 2 status: Available 
           length: Other 
CPU:       Topology: Single Core model: Pentium III (Coppermine) bits: 32 type: MCP 
           arch: P6 III Coppermine family: 6 model-id: 8 stepping: 6 microcode: 9 L1 cache: 32 KiB 
           L2 cache: 256 KiB bogomips: 1694 
           Speed: 850 MHz min/max: 700/850 MHz Core speed (MHz): 1: 850 
           Flags: cmov cpuid cx8 de fpu fxsr mca mce mmx msr mtrr pae pge pse pse36 pti sep sse tsc vme 
           Vulnerabilities: Type: l1tf mitigation: PTE Inversion 
           Type: meltdown mitigation: PTI 
           Type: spec_store_bypass status: Vulnerable 
           Type: spectre_v1 mitigation: __user pointer sanitization 
           Type: spectre_v2 mitigation: Full generic retpoline 
Graphics:  Device-1: Neomagic NM2360 [MagicMedia 256ZX] vendor: IBM ThinkPad 600X driver: N/A 
           bus ID: 01:00.0 chip ID: 10c8:0006 
           Display: server: X.Org 1.19.2 driver: vesa resolution: 1024x768~61Hz 
           OpenGL: renderer: llvmpipe (LLVM 7.0 128 bits) v: 3.3 Mesa 18.2.6 compat-v: 3.1 
           direct render: Yes 
Audio:     Device-1: Cirrus Logic CS 4614/22/24/30 [CrystalClear SoundFusion Audio Accelerator] 
           vendor: IBM ThinkPad 600X/A20m driver: N/A bus ID: 00:06.0 chip ID: 1013:6003 
           Sound Server: ALSA v: k4.19.0-1-686-pae 
Network:   Device-1: Intel 82371AB/EB/MB PIIX4 ISA type: network bridge driver: N/A port: 4400 
           bus ID: 00:07.0 chip ID: 8086:7110 
           Device-2: Intel 82371AB/EB/MB PIIX4 ACPI type: network bridge driver: N/A port: 4000 
           bus ID: 00:07.3 chip ID: 8086:7113 
           Device-3: Ralink RT2800 802.11n PCI driver: rt2800pci v: 2.3.0 port: 4000 bus ID: 06:00.0 
           chip ID: 1814:0601 
           IF: wlan0 state: down mac: <filter> 
           WAN IP: No WAN IP data found. Connected to the web? SSL issues? 
Drives:    Local Storage: total: 119.24 GiB used: 35.7 MiB (0.0%) 
           ID-1: /dev/sda vendor: Crucial model: CT128M550SSD3 size: 119.24 GiB block size: 
           physical: 4096 B logical: 512 B speed: <unknown> serial: <filter> rev: MU01 temp: 43 C 
           scheme: MBR 
           Floppy-1: /dev/fd0 
           Optical-1: /dev/sr0 vendor: TOSHIBA model: DVD-ROM SD-C2612 rev: 1011 dev-links: cdrom,dvd 
           Features: speed: 24 multisession: yes audio: yes dvd: yes rw: none state: running 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: N/A size: 374.0 MiB used: 19.7 MiB (5.3%) fs: overlay dev: ERR-102 
           label: N/A uuid: N/A 
           ID-2: /live/boot-dev raw size: 1.29 GiB size: 1.29 GiB (99.94%) used: 1.29 GiB (100.0%) 
           fs: iso9660 block size: 2048 B dev: /dev/sr0 label: antiXlive uuid: 2018-12-03-02-22-49-00 
           ID-3: swap-1 size: 2.05 GiB used: 16.0 MiB (0.8%) fs: swap swappiness: 60 (default) 
           cache pressure: 100 (default) dev: /dev/sda2 label: N/A 
           uuid: e1d91df4-8549-41c8-9868-b42919b504c1 
Unmounted: ID-1: /dev/sda1 size: 117.20 GiB fs: ext4 label: N/A 
           uuid: 5c84ae89-d35e-46b9-bb10-905c61f3f9b9 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s chip ID: 1d6b:0001 
Sensors:   Message: No sensors data was found. Is sensors configured? 
Repos:     Active apt repos in: /etc/apt/sources.list.d/antix.list 
           1: deb http://iso.mxrepo.com/antix/stretch stretch main
           Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list 
           1: deb http://ftp.us.debian.org/debian/ stretch-updates main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/debian.list 
           1: deb http://ftp.us.debian.org/debian/ stretch main contrib non-free
           2: deb http://security.debian.org/ stretch/updates main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/mx.list 
           1: deb http://mxrepo.com/mx/repo/ stretch main non-free
           No active apt repos in: /etc/apt/sources.list.d/various.list 
Processes: CPU top: 5 
           1: cpu: 15.5% command: sudo pid: 4482 mem: 4.97 MiB (1.0%) 
           2: cpu: 6.9% command: xfce4-terminal pid: 4417 mem: 30.8 MiB (6.2%) 
           3: cpu: 6.1% command: libwhiskermenu.so started by: wrapper-1.0 pid: 4108 mem: 26.4 MiB (5.3%) 
           4: cpu: 5.2% command: xfwm4 pid: 3972 mem: 18.0 MiB (3.6%) 
           5: cpu: 5.1% command: xfsettingsd pid: 4052 mem: 15.8 MiB (3.2%) 
           Memory top: 5 
           1: mem: 61.2 MiB (12.3%) command: apt-notifier.py started by: python pid: 4082 cpu: 3.9% 
           2: mem: 31.0 MiB (6.2%) command: xorg pid: 3536 cpu: 4.2% 
           3: mem: 30.8 MiB (6.2%) command: xfce4-terminal pid: 4417 cpu: 6.9% 
           4: mem: 29.7 MiB (5.9%) command: nm-applet pid: 4024 cpu: 3.5% 
           5: mem: 27.9 MiB (5.6%) command: yad pid: 4029 cpu: 3.2% 
Info:      Processes: 152 Uptime: 10m Init: SysVinit v: 2.88 runlevel: 5 default: 5 Compilers: gcc: 6.3.0 
           alt: 6 Shell: bash (sudo) v: 4.4.12 running in: xfce4-terminal inxi: 3.0.25 
MX-17.1: Thinkpad x60t, x61t, x200t, x220t.
MX-18 (32-bit) Thinkpads: 600x*, A31p, T43p, T60p;
MX-18 (64-bit): MacBook13(5,1), Thinkpad x61s, T61pW, T601pF, x200, x301*, T500, W500, W700, W700ds, W701, W701ds*, x220, W520.

User avatar
Hierax_ca
Posts: 64
Joined: Sun Nov 08, 2015 6:46 pm

Re: MX-18 beta 1 feedback

#333 Post by Hierax_ca »

Thinkpad A31p (2002-2003):

Works fine!

sudo inxi -v8 -z

Code: Select all

System:    Host: Thinkpad-A31p-Linux-MX18b1 Kernel: 4.19.0-1-686-pae i686 bits: 32 compiler: gcc v: 6.3.0 
           Desktop: Xfce 4.12.3 tk: Gtk 2.24.31 info: xfce4-panel wm: xfwm4 dm: LightDM 1.18.3 
           Distro: MX-18b1_386 Continuum December 3  2018 base: Debian GNU/Linux 9 (stretch) 
Machine:   Type: Laptop System: IBM product: 2653R4U v: N/A serial: <filter> Chassis: type: 10 serial: N/A 
           Mobo: IBM model: 2653R4U serial: <filter> BIOS: IBM v: 1NET16WW (1.10 ) date: 10/19/2006 
Battery:   ID-1: BAT0 charge: 45.7 Wh condition: 45.7/47.5 Wh (96%) volts: 12.4/10.8 
           model: SANYO IBM-COMPATIBLE type: Li-ion serial: <filter> status: Full 
           ID-2: BAT1 charge: 17.9 Wh condition: 18.7/38.9 Wh (48%) volts: 12.4/10.8 
           model: SANYO IBM-02K6817 type: Li-ion serial: <filter> status: Unknown 
Memory:    RAM: total: 1.91 GiB used: 301.3 MiB (15.4%) 
           Array-1: capacity: 2 GiB note: est. slots: 2 EC: None max module size: 1 GiB note: est. 
           Device-1: DIMM 1 size: 1 GiB info: double-bank speed: Unknown type: SDRAM detail: synchronous 
           bus width: 64 bits total: 64 bits manufacturer: N/A part-no: Not Specified serial: <filter> 
           Device-2: DIMM 2 size: 1 GiB info: double-bank speed: Unknown type: SDRAM detail: synchronous 
           bus width: 64 bits total: 64 bits manufacturer: N/A part-no: Not Specified serial: <filter> 
PCI Slots: Slot: Adapter 0, Socket 0 type: 32-bit PC Card (PCMCIA) CardBus Slot 1 status: Available 
           length: Other 
           Slot: Adapter 1, Socket 0 type: 32-bit PC Card (PCMCIA) CardBus Slot 2 status: Available 
           length: Other 
           Slot: 1 type: 32-bit PCI Mini-PCI Slot 1 status: Available length: Other 
CPU:       Topology: Single Core model: Mobile Intel Pentium 4 - M bits: 32 type: MCP 
           arch: Netburst Northwood family: F (15) model-id: 2 stepping: 7 microcode: 39 L1 cache: 8 KiB 
           L2 cache: 512 KiB bogomips: 2397 
           Speed: 1200 MHz min/max: 1200/2000 MHz Core speed (MHz): 1: 1200 
           Flags: acpi bts cid clflush cmov cpuid cx8 de dts fpu fxsr ht mca mce mmx msr mtrr pae pat pbe 
           pebs pge pse pse36 pti sep ss sse sse2 tm tsc vme xtpr 
           Vulnerabilities: Type: l1tf mitigation: PTE Inversion 
           Type: meltdown mitigation: PTI 
           Type: spec_store_bypass status: Vulnerable 
           Type: spectre_v1 mitigation: __user pointer sanitization 
           Type: spectre_v2 mitigation: Full generic retpoline 
Graphics:  Device-1: Advanced Micro Devices [AMD/ATI] RV200/M7 GL [Mobility FireGL 7800] vendor: IBM 
           driver: radeon v: kernel bus ID: 01:00.0 chip ID: 1002:4c58 
           Display: server: X.Org 1.19.2 driver: ati,radeon unloaded: fbdev,modesetting,vesa 
           resolution: 1600x1200~60Hz 
           OpenGL: renderer: Mesa DRI R100 (RV200 4C58) x86/MMX/SSE2 DRI2 v: 1.3 Mesa 18.2.6 
           direct render: Yes 
Audio:     Device-1: Intel 82801CA/CAM AC97 Audio vendor: IBM ThinkPad T30 driver: snd_intel8x0 v: kernel 
           bus ID: 00:1f.5 chip ID: 8086:2485 
           Sound Server: ALSA v: k4.19.0-1-686-pae 
Network:   Device-1: Intel PRO/Wireless 2200BG [Calexico2] Network driver: ipw2200 v: 1.2.2kmprq port: 3000 
           bus ID: 02:02.0 chip ID: 8086:4220 
           IF: eth1 state: down mac: <filter> 
           Device-2: Intel 82801CAM PRO/100 VE Ethernet vendor: IBM ThinkPad A/T/X Series driver: e100 
           v: 3.5.24-k2-NAPI port: 8000 bus ID: 02:08.0 chip ID: 8086:1031 
           IF: eth0 state: up speed: 100 Mbps duplex: full mac: <filter> 
           IP v4: <filter> type: dynamic scope: global broadcast: <filter> 
           IP v6: <filter> type: dynamic scope: global 
           IP v6: <filter> type: noprefixroute dynamic scope: global 
           IP v6: <filter> scope: link 
           Device-3: Ralink RT2800 802.11n PCI driver: rt2800pci v: 2.3.0 port: 8000 bus ID: 03:00.0 
           chip ID: 1814:0601 
           IF: wlan0 state: down mac: <filter> 
           WAN IP: No WAN IP data found. Connected to the web? SSL issues? 
Drives:    Local Storage: total: 465.76 GiB used: 4.78 GiB (1.0%) 
           ID-1: /dev/sda vendor: Samsung model: SSD 860 EVO mSATA 500GB size: 465.76 GiB block size: 
           physical: 512 B logical: 512 B speed: <unknown> serial: <filter> rev: 1B6Q scheme: MBR 
           Floppy-1: /dev/fd0 
           Optical-1: /dev/sr0 vendor: HL-DT-ST model: RW/DVD GCC-4240N rev: 0211 dev-links: cdrom,cdrw,dvd 
           Features: speed: 24 multisession: yes audio: yes dvd: yes rw: cd-r,cd-rw state: running 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 32.00 GiB size: 31.25 GiB (97.65%) used: 4.72 GiB (15.1%) fs: ext4 
           block size: 4096 B dev: /dev/sda1 label: rootMX18 uuid: c7ea50f9-3dd7-48a3-be9f-e28afbf5d241 
           ID-2: /home raw size: 216.00 GiB size: 211.61 GiB (97.97%) used: 94.1 MiB (0.0%) fs: ext4 
           block size: 4096 B dev: /dev/sda2 label: homeMX18 uuid: 7959cf3f-8255-47c1-9b67-a91ee7f9e4a6 
           ID-3: /media/jason/DATA raw size: 215.76 GiB size: 211.37 GiB (97.97%) used: 60.0 MiB (0.0%) 
           fs: ext4 block size: 4096 B dev: /dev/sda3 label: DATA uuid: 7ea00ee0-1f86-4aec-8c4f-1063960309e6 
           ID-4: swap-1 size: 2.00 GiB used: 0 KiB (0.0%) fs: swap swappiness: 60 (default) 
           cache pressure: 100 (default) dev: /dev/sda4 label: SWAP 
           uuid: 231da768-e783-418a-a4fa-54dbc85841ef 
Unmounted: Message: No unmounted partitions found.
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s chip ID: 1d6b:0001 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s chip ID: 1d6b:0001 
           Hub: 3-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s chip ID: 1d6b:0001 
Sensors:   System Temperatures: cpu: 41.0 C mobo: 24.0 C 
           Fan Speeds (RPM): cpu: 3405 
Repos:     Active apt repos in: /etc/apt/sources.list.d/antix.list 
           1: deb http://iso.mxrepo.com/antix/stretch stretch main
           Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list 
           1: deb http://ftp.ca.debian.org/debian/ stretch-updates main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/debian.list 
           1: deb http://ftp.ca.debian.org/debian/ stretch main contrib non-free
           2: deb http://security.debian.org/ stretch/updates main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/mx.list 
           1: deb http://iso.mxrepo.com/mx/repo/ stretch main non-free
           No active apt repos in: /etc/apt/sources.list.d/various.list 
Processes: CPU top: 5 
           1: cpu: 5.1% command: xorg pid: 2327 mem: 41.4 MiB (2.1%) 
           2: cpu: 3.2% command: applet.py started by: python3 pid: 3308 mem: 25.4 MiB (1.3%) 
           3: cpu: 2.4% command: conky pid: 3530 mem: 10.2 MiB (0.5%) 
           4: cpu: 2.0% command: sudo pid: 4017 mem: 5.14 MiB (0.2%) 
           5: cpu: 1.5% command: apt-notifier.py started by: python pid: 3398 mem: 75.7 MiB (3.8%) 
           Memory top: 5 
           1: mem: 75.7 MiB (3.8%) command: apt-notifier.py started by: python pid: 3398 cpu: 1.5% 
           2: mem: 41.4 MiB (2.1%) command: xorg pid: 2327 cpu: 5.1% 
           3: mem: 35.0 MiB (1.7%) command: xfce4-terminal pid: 3145 cpu: 1.1% 
           4: mem: 34.9 MiB (1.7%) command: tumblerd pid: 3164 cpu: 0.8% 
           5: mem: 32.7 MiB (1.6%) command: xfdesktop pid: 3115 cpu: 1.1% 
Info:      Processes: 157 Uptime: 2m Init: SysVinit v: 2.88 runlevel: 5 default: 5 Compilers: gcc: 6.3.0 
           alt: 6 Shell: bash (sudo) v: 4.4.12 running in: xfce4-terminal inxi: 3.0.25 
MX-17.1: Thinkpad x60t, x61t, x200t, x220t.
MX-18 (32-bit) Thinkpads: 600x*, A31p, T43p, T60p;
MX-18 (64-bit): MacBook13(5,1), Thinkpad x61s, T61pW, T601pF, x200, x301*, T500, W500, W700, W700ds, W701, W701ds*, x220, W520.

User avatar
Hierax_ca
Posts: 64
Joined: Sun Nov 08, 2015 6:46 pm

Re: MX-18 beta 1 feedback

#334 Post by Hierax_ca »

Thinkpad T43p (2005-2006):

Works fine!

sudo inxi -v8 -z

Code: Select all

System:    Host: Thinkpad-T43p-Linux-MX18b1 Kernel: 4.19.0-1-686-pae i686 bits: 32 compiler: gcc v: 6.3.0 
           Desktop: Xfce 4.12.3 tk: Gtk 2.24.31 info: xfce4-panel wm: xfwm4 dm: LightDM 1.18.3 
           Distro: MX-18b1_386 Continuum December 3  2018 base: Debian GNU/Linux 9 (stretch) 
Machine:   Type: Laptop System: IBM product: 2668H2U v: ThinkPad T43p serial: <filter> Chassis: type: 10 
           serial: N/A 
           Mobo: IBM model: 2668H2U serial: <filter> BIOS: IBM v: 1YET59WW (1.24 ) date: 11/07/2005 
Battery:   ID-1: BAT0 charge: 62.4 Wh condition: 62.4/77.8 Wh (80%) volts: 12.5/10.8 
           model: Panasonic IBM-92P1068 type: Li-ion serial: <filter> status: Full 
Memory:    RAM: total: 1.90 GiB used: 297.5 MiB (15.3%) 
           Array-1: capacity: 2 GiB note: est. slots: 2 EC: None max module size: 1 GiB 
           Device-1: DIMM 1 size: 1 GiB info: double-bank speed: Unknown type: DDR detail: synchronous 
           bus width: 64 bits total: 64 bits manufacturer: N/A part-no: Not Specified serial: <filter> 
           Device-2: DIMM 2 size: 1 GiB info: double-bank speed: Unknown type: DDR detail: synchronous 
           bus width: 64 bits total: 64 bits manufacturer: N/A part-no: Not Specified serial: <filter> 
PCI Slots: Slot: Adapter 0, Socket 0 type: 32-bit PC Card (PCMCIA) CardBus Slot 1 status: Available 
           length: Other 
           Slot: 1 type: 32-bit PCI Mini-PCI Slot 1 status: Available length: Other 
CPU:       Topology: Single Core model: Intel Pentium M bits: 32 type: MCP arch: M Dothan family: 6 
           model-id: D (13) stepping: 8 microcode: 20 L1 cache: 32 KiB L2 cache: 2048 KiB bogomips: 1596 
           Speed: 800 MHz min/max: 800/2133 MHz Core speed (MHz): 1: 1066 
           Flags: acpi apic bts clflush cmov cpuid cx8 de dts est fpu fxsr mca mce mmx msr mtrr nx pae pbe 
           pge pse pti sep ss sse sse2 tm tm2 tsc vme 
           Vulnerabilities: Type: l1tf mitigation: PTE Inversion 
           Type: meltdown mitigation: PTI 
           Type: spec_store_bypass status: Vulnerable 
           Type: spectre_v1 mitigation: __user pointer sanitization 
           Type: spectre_v2 mitigation: Full generic retpoline 
Graphics:  Device-1: Advanced Micro Devices [AMD/ATI] RV380/M24 GL [Mobility FireGL V3200] vendor: IBM 
           driver: radeon v: kernel bus ID: 01:00.0 chip ID: 1002:3154 
           Display: server: X.Org 1.19.2 driver: ati,radeon unloaded: fbdev,modesetting,vesa 
           resolution: 1600x1200~60Hz 
           OpenGL: renderer: ATI RV380 v: 2.1 Mesa 18.2.6 direct render: Yes 
Audio:     Device-1: Intel 82801FB/FBM/FR/FW/FRW AC97 Audio vendor: IBM driver: snd_intel8x0 v: kernel 
           bus ID: 00:1e.2 chip ID: 8086:266e 
           Sound Server: ALSA v: k4.19.0-1-686-pae 
Network:   Device-1: Broadcom Limited NetXtreme BCM5751M Gigabit Ethernet PCI Express 
           vendor: IBM ThinkPad X41 / Z60t driver: tg3 v: 3.137 port: 3000 bus ID: 02:00.0 
           chip ID: 14e4:167d 
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter> 
           IP v4: <filter> type: dynamic scope: global broadcast: <filter> 
           IP v6: <filter> type: dynamic scope: global 
           IP v6: <filter> type: noprefixroute dynamic scope: global 
           IP v6: <filter> scope: link 
           Device-2: Intel PRO/Wireless 2200BG [Calexico2] Network driver: ipw2200 v: 1.2.2kmprq port: 3000 
           bus ID: 04:02.0 chip ID: 8086:4220 
           IF: eth1 state: up mac: <filter> 
           IP v4: <filter> type: dynamic scope: global broadcast: <filter> 
           IP v6: <filter> type: dynamic scope: global 
           IP v6: <filter> type: noprefixroute dynamic scope: global 
           IP v6: <filter> scope: link 
           Device-3: Ralink RT2800 802.11n PCI driver: rt2800pci v: 2.3.0 port: 3000 bus ID: 05:00.0 
           chip ID: 1814:0601 
           IF: wlan0 state: up mac: <filter> 
           IP v4: <filter> type: dynamic scope: global broadcast: <filter> 
           IP v6: <filter> type: dynamic scope: global 
           IP v6: <filter> type: noprefixroute dynamic scope: global 
           IP v6: <filter> scope: link 
           WAN IP: No WAN IP data found. Connected to the web? SSL issues? 
Drives:    Local Storage: total: 298.09 GiB used: 8.32 GiB (2.8%) 
           ID-1: /dev/sda vendor: Western Digital model: WD3200BEVE-00A0HT0 size: 298.09 GiB block size: 
           physical: 512 B logical: 512 B speed: <unknown> rotation: 5400 rpm serial: <filter> rev: 1A11 
           temp: 25 C scheme: MBR 
           Floppy-1: /dev/fd0 
           Optical-1: /dev/sr0 vendor: MATSHITA model: DVD-RAM UJ-822S rev: 1.61 
           dev-links: cdrom,cdrw,dvd,dvdrw 
           Features: speed: 24 multisession: yes audio: yes dvd: yes rw: cd-r,cd-rw,dvd-r,dvd-ram 
           state: running 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 296.09 GiB size: 290.44 GiB (98.09%) used: 8.32 GiB (2.9%) fs: ext4 
           block size: 4096 B dev: /dev/sda1 label: rootMX18 uuid: 9c1f7067-ce25-4d9f-a3d7-4db42bf19598 
           ID-2: swap-1 size: 2.00 GiB used: 0 KiB (0.0%) fs: swap swappiness: 60 (default) 
           cache pressure: 100 (default) dev: /dev/sda2 label: SWAP 
           uuid: db30d1e2-4571-4c44-8dc8-b29bb5b5d542 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s chip ID: 1d6b:0001 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s chip ID: 1d6b:0001 
           Hub: 3-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s chip ID: 1d6b:0001 
           Device-1: 3-2:2 info: STMicro Fingerprint Reader type: <vendor specific> driver: N/A 
           interfaces: 1 rev: 1.0 speed: 12 Mb/s chip ID: 0483:2016 
           Hub: 4-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s chip ID: 1d6b:0001 
           Hub: 5-0:1 info: Full speed (or root) Hub ports: 8 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 
Sensors:   System Temperatures: cpu: 39.0 C mobo: 37.0 C 
           Fan Speeds (RPM): cpu: 3081 
Repos:     Active apt repos in: /etc/apt/sources.list.d/antix.list 
           1: deb http://iso.mxrepo.com/antix/stretch stretch main
           Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list 
           1: deb http://ftp.ca.debian.org/debian/ stretch-updates main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/debian.list 
           1: deb http://ftp.ca.debian.org/debian/ stretch main contrib non-free
           2: deb http://security.debian.org/ stretch/updates main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/mx.list 
           1: deb http://iso.mxrepo.com/mx/repo/ stretch main non-free
           No active apt repos in: /etc/apt/sources.list.d/various.list 
Processes: CPU top: 5 
           1: cpu: 2.0% command: applet.py started by: python3 pid: 3719 mem: 25.5 MiB (1.3%) 
           2: cpu: 1.9% command: xorg pid: 2420 mem: 62.5 MiB (3.2%) 
           3: cpu: 1.7% command: conky pid: 4121 mem: 10.7 MiB (0.5%) 
           4: cpu: 1.6% command: hp-systray started by: python3 pid: 3684 mem: 76.9 MiB (3.9%) 
           5: cpu: 1.0% command: networkmanager pid: 2431 mem: 13.7 MiB (0.7%) 
           Memory top: 5 
           1: mem: 76.9 MiB (3.9%) command: hp-systray started by: python3 pid: 3684 cpu: 1.6% 
           2: mem: 74.3 MiB (3.8%) command: apt-notifier.py started by: python pid: 3970 cpu: 0.8% 
           3: mem: 62.5 MiB (3.2%) command: xorg pid: 2420 cpu: 1.9% 
           4: mem: 34.0 MiB (1.7%) command: xfce4-terminal pid: 3476 cpu: 0.6% 
           5: mem: 32.6 MiB (1.6%) command: xfdesktop pid: 3451 cpu: 0.7% 
Info:      Processes: 161 Uptime: 2m Init: SysVinit v: 2.88 runlevel: 5 default: 5 Compilers: gcc: 6.3.0 
           alt: 6 Shell: bash (sudo) v: 4.4.12 running in: xfce4-terminal inxi: 3.0.25 
MX-17.1: Thinkpad x60t, x61t, x200t, x220t.
MX-18 (32-bit) Thinkpads: 600x*, A31p, T43p, T60p;
MX-18 (64-bit): MacBook13(5,1), Thinkpad x61s, T61pW, T601pF, x200, x301*, T500, W500, W700, W700ds, W701, W701ds*, x220, W520.

User avatar
Hierax_ca
Posts: 64
Joined: Sun Nov 08, 2015 6:46 pm

Re: MX-18 beta 1 feedback

#335 Post by Hierax_ca »

Thinkpad T60p (2006-2007):

Works fine!

sudo inxi -v8 -z

Code: Select all

System:    Host: Thinkpad-T60p-Linux-MX18b1 Kernel: 4.19.0-1-amd64 x86_64 bits: 64 compiler: gcc v: 6.3.0 
           Desktop: Xfce 4.12.3 tk: Gtk 2.24.31 info: xfce4-panel wm: xfwm4 dm: LightDM 1.18.3 
           Distro: MX-18b1_x64 Continuum December 3  2018 base: Debian GNU/Linux 9 (stretch) 
Machine:   Type: Laptop System: LENOVO product: 2007WLY v: ThinkPad T60p serial: <filter> Chassis: type: 10 
           serial: N/A 
           Mobo: LENOVO model: 2007WLY serial: <filter> BIOS: LENOVO v: 79ETE7WW (2.27 ) date: 03/21/2011 
Battery:   ID-1: BAT0 charge: 64.5 Wh condition: 64.5/84.2 Wh (77%) volts: 12.4/10.8 
           model: Panasonic 92P1133 type: Li-ion serial: <filter> status: Full 
Memory:    RAM: total: 2.93 GiB used: 385.7 MiB (12.9%) 
           Array-1: capacity: 4 GiB note: est. slots: 2 EC: None max module size: 2 GiB 
           Device-1: DIMM 1 size: 2 GiB info: double-bank speed: Unknown type: DDR2 detail: synchronous 
           bus width: 64 bits total: 64 bits manufacturer: N/A part-no: Not Specified serial: <filter> 
           Device-2: DIMM 2 size: 2 GiB info: double-bank speed: Unknown type: DDR2 detail: synchronous 
           bus width: 64 bits total: 64 bits manufacturer: N/A part-no: Not Specified serial: <filter> 
PCI Slots: Slot: 0 type: x1 PCI Express ExpressCard Slot 1 status: Available length: Other 
           Slot: Adapter 1, Socket 0 type: 32-bit PC Card (PCMCIA) CardBus Slot 1 status: Available 
           length: Other 
CPU:       Topology: Dual Core model: Intel Core2 T7200 bits: 64 type: MCP arch: Core Merom family: 6 
           model-id: F (15) stepping: 6 microcode: D1 L1 cache: 128 KiB L2 cache: 4096 KiB bogomips: 7979 
           Speed: 1810 MHz min/max: 1000/2000 MHz Core speeds (MHz): 1: 997 2: 997 
           Flags: acpi aperfmperf apic arch_perfmon bts clflush cmov constant_tsc cpuid cx16 cx8 de ds_cpl 
           dtes64 dtherm dts est fpu fxsr ht lahf_lm lm mca mce mmx monitor msr mtrr nopl nx pae pat pbe 
           pdcm pebs pge pni pse pse36 pti rep_good sep ss sse sse2 ssse3 syscall tm tm2 tpr_shadow tsc vme 
           vmx xtpr 
           Vulnerabilities: Type: l1tf mitigation: PTE Inversion; VMX: EPT disabled 
           Type: meltdown mitigation: PTI 
           Type: spec_store_bypass status: Vulnerable 
           Type: spectre_v1 mitigation: __user pointer sanitization 
           Type: spectre_v2 mitigation: Full generic retpoline 
Graphics:  Device-1: Advanced Micro Devices [AMD/ATI] RV530/M56 GL [Mobility FireGL V5200] 
           vendor: Lenovo ThinkPad T60p driver: radeon v: kernel bus ID: 01:00.0 chip ID: 1002:71c4 
           Display: server: X.Org 1.19.2 driver: ati,radeon unloaded: fbdev,modesetting,vesa 
           resolution: 1600x1200~60Hz 
           OpenGL: renderer: ATI RV530 v: 2.1 Mesa 18.2.6 direct render: Yes 
Audio:     Device-1: Intel NM10/ICH7 Family High Definition Audio vendor: Lenovo ThinkPad R60/T60/X60 series 
           driver: snd_hda_intel v: kernel bus ID: 00:1b.0 chip ID: 8086:27d8 
           Sound Server: ALSA v: k4.19.0-1-amd64 
Network:   Device-1: Intel 82573L Gigabit Ethernet vendor: Lenovo ThinkPad T60 driver: e1000e v: 3.2.6-k 
           port: 3000 bus ID: 02:00.0 chip ID: 8086:109a 
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter> 
           IP v4: <filter> type: dynamic scope: global broadcast: <filter> 
           IP v6: <filter> type: dynamic scope: global 
           IP v6: <filter> type: noprefixroute dynamic scope: global 
           IP v6: <filter> scope: link 
           Device-2: Intel Ultimate N WiFi Link 5300 driver: iwlwifi v: kernel port: 3000 bus ID: 03:00.0 
           chip ID: 8086:4236 
           IF: wlan0 state: up mac: <filter> 
           IP v4: <filter> type: dynamic scope: global broadcast: <filter> 
           IP v6: <filter> type: dynamic scope: global 
           IP v6: <filter> type: noprefixroute dynamic scope: global 
           IP v6: <filter> scope: link 
           WAN IP: No WAN IP data found. Connected to the web? SSL issues? 
Drives:    Local Storage: total: 238.47 GiB used: 4.84 GiB (2.0%) 
           ID-1: /dev/sda vendor: Samsung model: SSD PM810 FDE 2.5 256GB size: 238.47 GiB block size: 
           physical: 512 B logical: 512 B speed: 1.5 Gb/s serial: <filter> rev: 7D1Q scheme: MBR 
           Optical-1: /dev/sr0 vendor: HL-DT-ST model: DVDRAM GSA-4083N rev: 1.08 
           dev-links: cdrom,cdrw,dvd,dvdrw 
           Features: speed: 24 multisession: yes audio: yes dvd: yes rw: cd-r,cd-rw,dvd-r,dvd-ram 
           state: running 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 234.47 GiB size: 229.79 GiB (98.00%) used: 4.84 GiB (2.1%) fs: ext4 
           block size: 4096 B dev: /dev/sda1 label: rootMX18 uuid: d95553fb-6eeb-40da-85d3-cc5e104d64ba 
           ID-2: swap-1 size: 4.00 GiB used: 0 KiB (0.0%) fs: swap swappiness: 60 (default) 
           cache pressure: 100 (default) dev: /dev/sda2 label: SWAP 
           uuid: ef0e0fef-4bbc-4485-888d-d98c7e38ba3d 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s chip ID: 1d6b:0001 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 8 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 
           Hub: 3-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s chip ID: 1d6b:0001 
           Device-1: 3-1:2 info: Sierra Wireless MC5720 Wireless Modem type: <vendor specific> 
           driver: sierra interfaces: 1 rev: 1.1 speed: 12 Mb/s chip ID: 1199:0218 
           Hub: 4-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s chip ID: 1d6b:0001 
           Hub: 5-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s chip ID: 1d6b:0001 
           Device-2: 5-1:2 info: Broadcom BCM2045B (BDC-2) [Bluetooth Controller] type: Bluetooth 
           driver: btusb interfaces: 4 rev: 2.0 speed: 12 Mb/s chip ID: 0a5c:2110 
           Device-3: 5-2:3 info: STMicro Fingerprint Reader type: <vendor specific> driver: N/A 
           interfaces: 1 rev: 1.0 speed: 12 Mb/s chip ID: 0483:2016 
Sensors:   System Temperatures: cpu: 46.0 C mobo: 29.0 C 
           Fan Speeds (RPM): cpu: 0 
Repos:     Active apt repos in: /etc/apt/sources.list.d/antix.list 
           1: deb http://iso.mxrepo.com/antix/stretch stretch main
           Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list 
           1: deb http://ftp.ca.debian.org/debian/ stretch-updates main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/debian.list 
           1: deb http://ftp.ca.debian.org/debian/ stretch main contrib non-free
           2: deb http://security.debian.org/ stretch/updates main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/mx.list 
           1: deb http://iso.mxrepo.com/mx/repo/ stretch main non-free
           No active apt repos in: /etc/apt/sources.list.d/various.list 
Processes: CPU top: 5 
           1: cpu: 1.3% command: xorg pid: 2692 mem: 69.9 MiB (2.3%) 
           2: cpu: 1.3% command: conky pid: 4420 mem: 11.7 MiB (0.3%) 
           3: cpu: 1.2% command: modemmanager pid: 2843 mem: 8.63 MiB (0.2%) 
           4: cpu: 0.7% command: applet.py started by: python3 pid: 4032 mem: 33.1 MiB (1.1%) 
           5: cpu: 0.5% command: init pid: 1 mem: 1.86 MiB (0.0%) 
           Memory top: 5 
           1: mem: 82.4 MiB (2.7%) command: apt-notifier.py started by: python pid: 4307 cpu: 0.2% 
           2: mem: 69.9 MiB (2.3%) command: xorg pid: 2692 cpu: 1.3% 
           3: mem: 39.5 MiB (1.3%) command: tumblerd pid: 3913 cpu: 0.2% 
           4: mem: 36.8 MiB (1.2%) command: xfce4-terminal pid: 3875 cpu: 0.2% 
           5: mem: 36.0 MiB (1.2%) command: nm-applet pid: 4009 cpu: 0.4% 
Info:      Processes: 180 Uptime: 4m Init: SysVinit v: 2.88 runlevel: 5 default: 5 Compilers: gcc: 6.3.0 
           alt: 6 Shell: bash (sudo) v: 4.4.12 running in: xfce4-terminal inxi: 3.0.25 
MX-17.1: Thinkpad x60t, x61t, x200t, x220t.
MX-18 (32-bit) Thinkpads: 600x*, A31p, T43p, T60p;
MX-18 (64-bit): MacBook13(5,1), Thinkpad x61s, T61pW, T601pF, x200, x301*, T500, W500, W700, W700ds, W701, W701ds*, x220, W520.

User avatar
Hierax_ca
Posts: 64
Joined: Sun Nov 08, 2015 6:46 pm

Re: MX-18 beta 1 feedback

#336 Post by Hierax_ca »

Thinkpad x60 Tablet aka x60t (2006-2007):

Boot Delay error still there! Need to implement fix from forums!

Fix (manual):
- update MX-18 to X.Org 1.19.6 as per stevo:
- viewtopic.php?f=134&t=45522
can this update be included in MX-18? It's been working fine in MX17.1 for a while.

Screen Rotation and Wacom Pen Alignment problem also persists.
Display > Rotation works correctly but the pen/mouse/pointer doesn't match the rotation making the pen useful only in non-rotated mode. I have no fix for this but it is a long-standing linux issue.

sudo inxi -v8 -z

Code: Select all

System:    Host: Thinkpad-x60t-Linux-MX18b1 Kernel: 4.19.0-1-amd64 x86_64 bits: 64 compiler: gcc v: 6.3.0 
           Desktop: Xfce 4.12.3 tk: Gtk 2.24.31 info: xfce4-panel wm: xfwm4 dm: LightDM 1.18.3 
           Distro: MX-18b1_x64 Continuum December 3  2018 base: Debian GNU/Linux 9 (stretch) 
Machine:   Type: Laptop System: LENOVO product: 6363C7U v: ThinkPad X60 Tablet serial: <filter> Chassis: 
           type: 10 serial: N/A 
           Mobo: LENOVO model: 6363C7U serial: <filter> BIOS: LENOVO v: 7JET30WW (1.15 ) date: 11/20/2008 
Battery:   ID-1: BAT0 charge: 42.4 Wh condition: 42.7/66.2 Wh (64%) volts: 16.5/14.4 model: SANYO 93P5032 
           type: Li-ion serial: <filter> status: Unknown 
Memory:    RAM: total: 2.92 GiB used: 366.7 MiB (12.2%) 
           Array-1: capacity: 4 GiB note: est. slots: 2 EC: None max module size: 2 GiB 
           Device-1: DIMM 1 size: 2 GiB info: double-bank speed: Unknown type: DDR2 detail: synchronous 
           bus width: 64 bits total: 64 bits manufacturer: N/A part-no: Not Specified serial: <filter> 
           Device-2: DIMM 2 size: 2 GiB info: double-bank speed: Unknown type: DDR2 detail: synchronous 
           bus width: 64 bits total: 64 bits manufacturer: N/A part-no: Not Specified serial: <filter> 
PCI Slots: Slot: Adapter 1, Socket 0 type: 32-bit PC Card (PCMCIA) CardBus Slot 1 status: Available 
           length: Other 
           Slot: N/A type: SD Card Slot 1 status: Available length: Other 
CPU:       Topology: Dual Core model: Intel Core2 L7400 bits: 64 type: MCP arch: Core Merom family: 6 
           model-id: F (15) stepping: 6 microcode: D1 L1 cache: 128 KiB L2 cache: 4096 KiB bogomips: 5984 
           Speed: 1418 MHz min/max: 1000/1500 MHz Core speeds (MHz): 1: 1209 2: 1068 
           Flags: acpi aperfmperf apic arch_perfmon bts clflush cmov constant_tsc cpuid cx16 cx8 de ds_cpl 
           dtes64 dtherm dts est fpu fxsr ht lahf_lm lm mca mce mmx monitor msr mtrr nopl nx pae pat pbe pdcm 
           pebs pge pni pse pse36 pti rep_good sep ss sse sse2 ssse3 syscall tm tm2 tpr_shadow tsc vme vmx xtpr 
           Vulnerabilities: Type: l1tf mitigation: PTE Inversion 
           Type: meltdown mitigation: PTI 
           Type: spec_store_bypass status: Vulnerable 
           Type: spectre_v1 mitigation: __user pointer sanitization 
           Type: spectre_v2 mitigation: Full generic retpoline 
Graphics:  Device-1: Intel Mobile 945GM/GMS 943/940GML Express Integrated Graphics 
           vendor: Lenovo ThinkPad R60/T60/X60 series driver: i915 v: kernel bus ID: 00:02.0 chip ID: 8086:27a2 
           Display: server: X.Org 1.19.2 driver: intel resolution: 1400x1050~50Hz 
           OpenGL: renderer: Mesa DRI Intel 945GM v: 1.4 Mesa 18.2.6 direct render: Yes 
Audio:     Device-1: Intel NM10/ICH7 Family High Definition Audio vendor: Lenovo ThinkPad R60/T60/X60 series 
           driver: snd_hda_intel v: kernel bus ID: 00:1b.0 chip ID: 8086:27d8 
           Sound Server: ALSA v: k4.19.0-1-amd64 
Network:   Device-1: vendor: Lenovo driver: N/A port: 2000 bus ID: 02:00.0 chip ID: 682c:109a 
           Device-2: Intel PRO/Wireless 3945ABG [Golan] Network driver: iwl3945 v: in-tree:s port: 2000 
           bus ID: 03:00.0 chip ID: 8086:4227 
           IF: wlan0 state: down mac: <filter> 
           WAN IP: No WAN IP data found. Connected to the web? SSL issues? 
Drives:    Local Storage: total: 1.82 TiB used: 4.63 GiB (0.2%) 
           ID-1: /dev/sda vendor: Seagate model: ST2000LX001-1RG174 size: 1.82 TiB block size: physical: 4096 B 
           logical: 512 B speed: 1.5 Gb/s rotation: 5400 rpm serial: <filter> rev: SDM1 temp: 42 C scheme: MBR 
           Optical-1: /dev/sr0 vendor: Optiarc model: DVD RW AD-7910A rev: 1.D1 dev-links: cdrom,cdrw,dvd,dvdrw 
           Features: speed: 24 multisession: yes audio: yes dvd: yes rw: cd-r,cd-rw,dvd-r,dvd-ram 
           state: running 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: 929.51 GiB size: 913.92 GiB (98.32%) used: 4.63 GiB (0.5%) fs: ext4 
           block size: 4096 B dev: /dev/sda3 label: rootMX18 uuid: 3d3361da-db6b-4b6a-b8c6-e5bf2475c769 
           ID-2: swap-1 size: 4.00 GiB used: 0 KiB (0.0%) fs: swap swappiness: 60 (default) 
           cache pressure: 100 (default) dev: /dev/sda4 label: SWAP-Linux 
           uuid: bab3f890-e58e-4ce4-9aa6-6651414abf0b 
Unmounted: ID-1: /dev/sda1 size: 100.0 MiB fs: ntfs label: System Reserved uuid: A61CD5F91CD5C489 
           ID-2: /dev/sda2 size: 929.41 GiB fs: ntfs label: N/A uuid: 4662E92B62E92083 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s chip ID: 1d6b:0001 
           Hub: 2-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s chip ID: 1d6b:0001 
           Hub: 3-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s chip ID: 1d6b:0001 
           Hub: 4-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s chip ID: 1d6b:0001 
           Device-1: 4-1:2 info: STMicro Fingerprint Reader type: <vendor specific> driver: N/A interfaces: 1 
           rev: 1.0 speed: 12 Mb/s chip ID: 0483:2016 
           Device-2: 4-2:3 info: Broadcom BCM2045B (BDC-2) [Bluetooth Controller] type: Bluetooth driver: btusb 
           interfaces: 4 rev: 2.0 speed: 12 Mb/s chip ID: 0a5c:2110 
           Hub: 5-0:1 info: Full speed (or root) Hub ports: 8 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 
           Hub: 5-6:2 info: Lenovo Hub ports: 4 rev: 2.0 speed: 480 Mb/s chip ID: 17ef:1000 
Sensors:   System Temperatures: cpu: 50.0 C mobo: 49.0 C 
           Fan Speeds (RPM): cpu: 3467 
Repos:     Active apt repos in: /etc/apt/sources.list.d/antix.list 
           1: deb http://iso.mxrepo.com/antix/stretch stretch main
           Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list 
           1: deb http://ftp.ca.debian.org/debian/ stretch-updates main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/debian.list 
           1: deb http://ftp.ca.debian.org/debian/ stretch main contrib non-free
           2: deb http://security.debian.org/ stretch/updates main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/mx.list 
           1: deb http://iso.mxrepo.com/mx/repo/ stretch main non-free
           No active apt repos in: /etc/apt/sources.list.d/various.list 
Processes: CPU top: 5 
           1: cpu: 1.4% command: xfwm4 pid: 3359 mem: 20.8 MiB (0.6%) 
           2: cpu: 0.9% command: conky pid: 3881 mem: 13.7 MiB (0.4%) 
           3: cpu: 0.6% command: xorg pid: 2900 mem: 21.7 MiB (0.7%) 
           4: cpu: 0.6% command: xfsettingsd pid: 3370 mem: 20.2 MiB (0.6%) 
           5: cpu: 0.6% command: applet.py started by: python3 pid: 3425 mem: 33.2 MiB (1.1%) 
           Memory top: 5 
           1: mem: 82.8 MiB (2.7%) command: apt-notifier.py started by: python pid: 3586 cpu: 0.3% 
           2: mem: 37.9 MiB (1.2%) command: tumblerd pid: 3545 cpu: 0.2% 
           3: mem: 37.4 MiB (1.2%) command: nm-applet pid: 3452 cpu: 0.6% 
           4: mem: 36.8 MiB (1.2%) command: xfce4-terminal pid: 3784 cpu: 0.6% 
           5: mem: 33.2 MiB (1.1%) command: applet.py started by: python3 pid: 3425 cpu: 0.6% 
Info:      Processes: 172 Uptime: 8m Init: SysVinit v: 2.88 runlevel: 5 default: 5 Compilers: gcc: 6.3.0 alt: 6 
           Shell: bash (sudo) v: 4.4.12 running in: xfce4-terminal inxi: 3.0.25 
MX-17.1: Thinkpad x60t, x61t, x200t, x220t.
MX-18 (32-bit) Thinkpads: 600x*, A31p, T43p, T60p;
MX-18 (64-bit): MacBook13(5,1), Thinkpad x61s, T61pW, T601pF, x200, x301*, T500, W500, W700, W700ds, W701, W701ds*, x220, W520.

User avatar
Hierax_ca
Posts: 64
Joined: Sun Nov 08, 2015 6:46 pm

Re: MX-18 beta 1 feedback

#337 Post by Hierax_ca »

This Tablet Rotation and Pen Alignment error also applies to the Thinkpads x61t, x200t, and x220t. Presumably others too, does anyone have a pen tablet working properly with Linux?
MX-17.1: Thinkpad x60t, x61t, x200t, x220t.
MX-18 (32-bit) Thinkpads: 600x*, A31p, T43p, T60p;
MX-18 (64-bit): MacBook13(5,1), Thinkpad x61s, T61pW, T601pF, x200, x301*, T500, W500, W700, W700ds, W701, W701ds*, x220, W520.

User avatar
Hierax_ca
Posts: 64
Joined: Sun Nov 08, 2015 6:46 pm

Re: MX-18 beta 1 feedback

#338 Post by Hierax_ca »

General random notes on MX-18b1 32-bit testing:

MX-18 Testing Beta 1 32-bit

General:

- MX Welcome Tools icon doesn't match regular icon for mxtools, make same (also codecs).

- add AntiX-cli-cc to MX Testing Repo, if not popular apps

- LibreOffice 1:6.1.3-1~bpo9+2 from Backports might be the last 32-bit LibreOffice (no 32-bit 6.2 from TDF), be good to have it as the default (if GIMP can be newer than stable 2.10.8 vs. 2.8.22 (?) why not LibreOffice just moving to a more stable bug-fixed version?). FWIW, latest is 2018-11-30: https://downloadarchive.documentfoundat ... 1.4.1/deb/

- MX Package Installer:

- re-order tabs, Backports should be before Test repo

- Audio: add exfalso, quodlibet, maybe add old audio packages from alsa project (see 600x fix above)

- Browsers: add palemoon-nonsse2 single core to Popular apps on 32-bit for older low-spec computers (to match kernel option), Dillo, Links2 because Firefox struggles on really old computers!

- Desktop Environments: LXQT

- Development : add Bluefish

- FileManagers: add xfe

- Games: DOSBOX! ScummVM, gnugo, gnubg, pychess, triplea, etc...

- Graphics: AZpainter, LightZone, Scribus should be 1.4.7 for main popular option, 1.5.x for testing

- Office: FocusWriter

- Wallpapers: MX17, AntiX

- Window Managers: add i3, update iceWM to 1.4.3.0~pre-20181030-2 (so that sending app to workspace works properly, this has been working well for me in antiX 17.x Testing/Buster)

- add a section for Terminal apps: include the amazing AntiX-cli-cc
MX-17.1: Thinkpad x60t, x61t, x200t, x220t.
MX-18 (32-bit) Thinkpads: 600x*, A31p, T43p, T60p;
MX-18 (64-bit): MacBook13(5,1), Thinkpad x61s, T61pW, T601pF, x200, x301*, T500, W500, W700, W700ds, W701, W701ds*, x220, W520.

User avatar
Stevo
Developer
Posts: 12774
Joined: Fri Dec 15, 2006 8:07 pm

Re: MX-18 beta 1 feedback

#339 Post by Stevo »

Hierax_ca wrote: Wed Dec 12, 2018 12:10 am Thinkpad 600x (1999-2001)

Display Color and Audio Sound issues persist (started with antix-17 and mx-17, works properly with MX-14.4 and 16.1):

Color Problem:
- colors display as inverted/opposite -- e.g., yellow=purple, blue=green. Note: this problem doesn't happen in AntiX-core cli console interface, issue occurs only with xorg running.

$ inxi -Gxxx

Code: Select all

Graphics:
  Device-1: Neomagic NM2360 [MagicMedia 256ZX] vendor: IBM ThinkPad 600X 
  driver: N/A bus ID: 01:00.0 chip ID: 10c8:0006 
  Display: x11 server: X.Org 1.19.2 driver: vesa resolution: 1024x768~61Hz 
  OpenGL: renderer: llvmpipe (LLVM 7.0 128 bits) v: 3.3 Mesa 18.2.6 compat-v: 3.1 
  direct render: Yes 
Color Solution:
- sudo nano on /etc/X11/xorg.conf
- changed color depth to 16-bit by adding last line: "DefaultDepth 16"

Is there a way to have the color depth detected on install and change this automatically or semi-manually with an Fn button option in the Live boot or installer? Or some MX tool for low color resolution? Or something to get color displaying properly on ancient computers like this? Was whatever that did this before (with MX-14.4 and -16.1) removed?

Sound Problem:
- MX Select Sound: "No sound cards/devices were found"

Before Fix
$ inxi -Axxx

Code: Select all

Audio:
  Device-1: Cirrus Logic CS 4614/22/24/30 [CrystalClear SoundFusion Audio 
  Accelerator] 
  vendor: IBM ThinkPad 600X/A20m driver: N/A bus ID: 00:06.0 chip ID: 1013:6003 
  Sound Server: ALSA v: k4.19.0-1-686-pae 
Sound Solution (manual):
- download latest old firmware: ftp://ftp.alsa-project.org/pub/firmware ... 29.tar.bz2 (2015-02-20)
- right click in Thunar extract here
- copy cs46xx folder
- open Root Thunar
- paste to /lib/firmware/
- open terminal "sudo modprobe -r snd-cs46xx" then "sudo modprobe snd-cs46xx"

Could this cs46xx firmware be included in the 32-bit .iso (or an MX tool created that could extract and paste the needed driver)? There are also numerous other old sound cards here in the file that might help other people with really old laptops.

After Fix:
$ inxi -Axxx

Code: Select all

Audio:
  Device-1: Cirrus Logic CS 4614/22/24/30 [CrystalClear SoundFusion Audio 
  Accelerator] 
  vendor: IBM ThinkPad 600X/A20m driver: snd_cs46xx v: kernel bus ID: 00:06.0 
  chip ID: 1013:6003 
  Sound Server: ALSA v: k4.19.0-1-686-pae 

Full inxi
sudo inxi -v8 -z

Code: Select all

System:    Host: mx1 Kernel: 4.19.0-1-686-pae i686 bits: 32 compiler: gcc v: 6.3.0 Desktop: Xfce 4.12.3 
           tk: Gtk 2.24.31 info: xfce4-panel wm: xfwm4 dm: LightDM 1.18.3 
           Distro: MX-18b1_386 Continuum December 3  2018 base: Debian GNU/Linux 9 (stretch) 
Machine:   Type: Laptop System: IBM product: 26468EU v: N/A serial: <filter> Chassis: type: 10 
           serial: N/A 
           Mobo: IBM model: 26468EU serial: <filter> BIOS: IBM v: ITET55WW date: 11/30/1999 
Battery:   ID-1: BAT0 charge: 43.3 Wh condition: 45.4/45.4 Wh (100%) volts: 11.8/10.8 
           model: IBM Corporation ThinkPad Battery type: Li-ion serial: N/A status: Unknown 
Memory:    RAM: total: 494.6 MiB used: 234.3 MiB (47.4%) 
           Array-1: capacity: 768 MiB note: est. slots: 3 EC: None max module size: 256 MiB 
           Device-1: DIMM 0 size: 64 MiB info: single-bank speed: type: Other detail: synchronous 
           bus width: 64 bits total: 64 bits manufacturer: N/A part-no: N/A serial: N/A 
           Device-2: DIMM 1 size: 256 MiB info: double-bank speed: type: Other detail: synchronous 
           bus width: 64 bits total: 64 bits manufacturer: N/A part-no: N/A serial: N/A 
           Device-3: DIMM 2 size: 256 MiB info: double-bank speed: type: Other detail: synchronous 
           bus width: 64 bits total: 64 bits manufacturer: N/A part-no: N/A serial: N/A 
PCI Slots: Slot: Adapter 0, Socket 0 type: 32-bit PC Card (PCMCIA) CardBus Slot 1 status: Available 
           length: Other 
           Slot: Adapter 0, Socket 1 type: 32-bit PC Card (PCMCIA) CardBus Slot 2 status: Available 
           length: Other 
CPU:       Topology: Single Core model: Pentium III (Coppermine) bits: 32 type: MCP 
           arch: P6 III Coppermine family: 6 model-id: 8 stepping: 6 microcode: 9 L1 cache: 32 KiB 
           L2 cache: 256 KiB bogomips: 1694 
           Speed: 850 MHz min/max: 700/850 MHz Core speed (MHz): 1: 850 
           Flags: cmov cpuid cx8 de fpu fxsr mca mce mmx msr mtrr pae pge pse pse36 pti sep sse tsc vme 
           Vulnerabilities: Type: l1tf mitigation: PTE Inversion 
           Type: meltdown mitigation: PTI 
           Type: spec_store_bypass status: Vulnerable 
           Type: spectre_v1 mitigation: __user pointer sanitization 
           Type: spectre_v2 mitigation: Full generic retpoline 
Graphics:  Device-1: Neomagic NM2360 [MagicMedia 256ZX] vendor: IBM ThinkPad 600X driver: N/A 
           bus ID: 01:00.0 chip ID: 10c8:0006 
           Display: server: X.Org 1.19.2 driver: vesa resolution: 1024x768~61Hz 
           OpenGL: renderer: llvmpipe (LLVM 7.0 128 bits) v: 3.3 Mesa 18.2.6 compat-v: 3.1 
           direct render: Yes 
Audio:     Device-1: Cirrus Logic CS 4614/22/24/30 [CrystalClear SoundFusion Audio Accelerator] 
           vendor: IBM ThinkPad 600X/A20m driver: N/A bus ID: 00:06.0 chip ID: 1013:6003 
           Sound Server: ALSA v: k4.19.0-1-686-pae 
Network:   Device-1: Intel 82371AB/EB/MB PIIX4 ISA type: network bridge driver: N/A port: 4400 
           bus ID: 00:07.0 chip ID: 8086:7110 
           Device-2: Intel 82371AB/EB/MB PIIX4 ACPI type: network bridge driver: N/A port: 4000 
           bus ID: 00:07.3 chip ID: 8086:7113 
           Device-3: Ralink RT2800 802.11n PCI driver: rt2800pci v: 2.3.0 port: 4000 bus ID: 06:00.0 
           chip ID: 1814:0601 
           IF: wlan0 state: down mac: <filter> 
           WAN IP: No WAN IP data found. Connected to the web? SSL issues? 
Drives:    Local Storage: total: 119.24 GiB used: 35.7 MiB (0.0%) 
           ID-1: /dev/sda vendor: Crucial model: CT128M550SSD3 size: 119.24 GiB block size: 
           physical: 4096 B logical: 512 B speed: <unknown> serial: <filter> rev: MU01 temp: 43 C 
           scheme: MBR 
           Floppy-1: /dev/fd0 
           Optical-1: /dev/sr0 vendor: TOSHIBA model: DVD-ROM SD-C2612 rev: 1011 dev-links: cdrom,dvd 
           Features: speed: 24 multisession: yes audio: yes dvd: yes rw: none state: running 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / raw size: N/A size: 374.0 MiB used: 19.7 MiB (5.3%) fs: overlay dev: ERR-102 
           label: N/A uuid: N/A 
           ID-2: /live/boot-dev raw size: 1.29 GiB size: 1.29 GiB (99.94%) used: 1.29 GiB (100.0%) 
           fs: iso9660 block size: 2048 B dev: /dev/sr0 label: antiXlive uuid: 2018-12-03-02-22-49-00 
           ID-3: swap-1 size: 2.05 GiB used: 16.0 MiB (0.8%) fs: swap swappiness: 60 (default) 
           cache pressure: 100 (default) dev: /dev/sda2 label: N/A 
           uuid: e1d91df4-8549-41c8-9868-b42919b504c1 
Unmounted: ID-1: /dev/sda1 size: 117.20 GiB fs: ext4 label: N/A 
           uuid: 5c84ae89-d35e-46b9-bb10-905c61f3f9b9 
USB:       Hub: 1-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s chip ID: 1d6b:0001 
Sensors:   Message: No sensors data was found. Is sensors configured? 
Repos:     Active apt repos in: /etc/apt/sources.list.d/antix.list 
           1: deb http://iso.mxrepo.com/antix/stretch stretch main
           Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list 
           1: deb http://ftp.us.debian.org/debian/ stretch-updates main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/debian.list 
           1: deb http://ftp.us.debian.org/debian/ stretch main contrib non-free
           2: deb http://security.debian.org/ stretch/updates main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/mx.list 
           1: deb http://mxrepo.com/mx/repo/ stretch main non-free
           No active apt repos in: /etc/apt/sources.list.d/various.list 
Processes: CPU top: 5 
           1: cpu: 15.5% command: sudo pid: 4482 mem: 4.97 MiB (1.0%) 
           2: cpu: 6.9% command: xfce4-terminal pid: 4417 mem: 30.8 MiB (6.2%) 
           3: cpu: 6.1% command: libwhiskermenu.so started by: wrapper-1.0 pid: 4108 mem: 26.4 MiB (5.3%) 
           4: cpu: 5.2% command: xfwm4 pid: 3972 mem: 18.0 MiB (3.6%) 
           5: cpu: 5.1% command: xfsettingsd pid: 4052 mem: 15.8 MiB (3.2%) 
           Memory top: 5 
           1: mem: 61.2 MiB (12.3%) command: apt-notifier.py started by: python pid: 4082 cpu: 3.9% 
           2: mem: 31.0 MiB (6.2%) command: xorg pid: 3536 cpu: 4.2% 
           3: mem: 30.8 MiB (6.2%) command: xfce4-terminal pid: 4417 cpu: 6.9% 
           4: mem: 29.7 MiB (5.9%) command: nm-applet pid: 4024 cpu: 3.5% 
           5: mem: 27.9 MiB (5.6%) command: yad pid: 4029 cpu: 3.2% 
Info:      Processes: 152 Uptime: 10m Init: SysVinit v: 2.88 runlevel: 5 default: 5 Compilers: gcc: 6.3.0 
           alt: 6 Shell: bash (sudo) v: 4.4.12 running in: xfce4-terminal inxi: 3.0.25 
There is an xserver-xorg-video-neomagic video driver in Synaptic, but maybe it's not for your chipset, or else you need to specify it in an xorg.conf type file if you have it installed and it's still using the vesa driver.

User avatar
Gordon Cooper
Posts: 965
Joined: Mon Nov 21, 2011 5:50 pm

Re: MX-18 beta 1 feedback

#340 Post by Gordon Cooper »

Thought I had commented here before. But no. Must have been writing to myself.

Hierax, many thanks for the MX-18/Thinkpad reports. There is a place for these on the MX Wiki. Meantime, will wait and see it there are any changes in the Mx-18 final release that may change the compatibility of those Thinkpads. IMHO you may be a bit hopeful with the X600, it is a old machine and perhaps has reached the end of its use by date ?
G.
Backup: Dell9010, MX-19_B2, Win7, 120 SSD, WD 232GIB HD, 4GB RAM
Primary :Homebrew64 bit Intel duo core 2 GB RAM, 120 GB Kingston SSD, Seagate1TB.
MX-18.2 64bit. Also MX17, Kubuntu14.04 & Puppy 6.3.

Locked

Return to “General”