78.13.0
to
102.8.0
but it is not working and I get this output from the installer:
What can be done about that.?
Code: Select all
System: Kernel: 5.10.0-21-amd64 [5.10.162-1] x86_64 bits: 64 compiler: gcc v: 10.2.1
parameters: BOOT_IMAGE=/boot/vmlinuz-5.10.0-21-amd64
root=UUID=<filter> ro quiet splash
Desktop: Xfce 4.18.1 tk: Gtk 3.24.24 info: xfce4-panel wm: xfwm 4.18.0 vt: 7
dm: LightDM 1.26.0 Distro: MX-21.3_x64 Wildflower January 15 2023
base: Debian GNU/Linux 11 (bullseye)
Machine: Type: Desktop System: LENOVO product: 90GA000AMW v: ideacentre 310S-08IAP
serial: <filter> Chassis: type: 3 serial: <filter>
Mobo: LENOVO model: 36C8 v: SDK0J40700 WIN 3258080898601 serial: <filter> UEFI: LENOVO
v: O2XKT22A date: 04/06/2017
CPU: Info: Quad Core model: Intel Pentium J4205 bits: 64 type: MCP arch: Goldmont family: 6
model-id: 5C (92) stepping: 9 microcode: 48 cache: L2: 1024 KiB
flags: lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 bogomips: 11980
Speed: 1770 MHz min/max: 800/2600 MHz Core speeds (MHz): 1: 1770 2: 1490 3: 1803
4: 1774
Vulnerabilities: Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: mmio_stale_data status: Not affected
Type: retbleed status: Not affected
Type: spec_store_bypass status: Not affected
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, IBRS_FW, STIBP: disabled,
RSB filling, PBRSB-eIBRS: Not affected
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics: Device-1: Intel Celeron N3350/Pentium N4200/Atom E3900 Series Integrated Graphics
vendor: Lenovo driver: i915 v: kernel bus-ID: 00:02.0 chip-ID: 8086:5a84 class-ID: 0300
Display: x11 server: X.Org 1.20.11 compositor: xfwm4 v: 4.18.0 driver:
loaded: modesetting unloaded: fbdev,vesa display-ID: :0.0 screens: 1
Screen-1: 0 s-res: 2048x1152 s-dpi: 96 s-size: 541x304mm (21.3x12.0")
s-diag: 621mm (24.4")
Monitor-1: DP-1 res: 2048x1152 hz: 60 dpi: 87 size: 597x336mm (23.5x13.2")
diag: 685mm (27")
OpenGL: renderer: Mesa Intel HD Graphics 505 (APL 3) v: 4.6 Mesa 20.3.5
direct render: Yes
Audio: Device-1: Intel Celeron N3350/Pentium N4200/Atom E3900 Series Audio Cluster
vendor: Lenovo driver: snd_hda_intel v: kernel alternate: snd_soc_skl,snd_sof_pci
bus-ID: 00:0e.0 chip-ID: 8086:5a98 class-ID: 0403
Sound Server-1: ALSA v: k5.10.0-21-amd64 running: yes
Sound Server-2: PulseAudio v: 14.2 running: yes
Network: Device-1: Intel Dual Band Wireless-AC 3165 Plus Bluetooth driver: iwlwifi v: kernel
modules: wl port: f040 bus-ID: 01:00.0 chip-ID: 8086:3166 class-ID: 0280
IF: wlan0 state: down mac: <filter>
Device-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet vendor: Lenovo
driver: r8169 v: kernel port: e000 bus-ID: 02:00.0 chip-ID: 10ec:8168 class-ID: 0200
IF: eth0 state: down mac: <filter>
Bluetooth: Device-1: Intel Bluetooth wireless interface type: USB driver: btusb v: 0.8
bus-ID: 1-5:3 chip-ID: 8087:0a2a class-ID: e001
Report: hciconfig ID: hci0 rfk-id: 1 state: up address: <filter> bt-v: 2.1 lmp-v: 4.2
sub-v: 1000 hci-v: 4.2 rev: 1000
Info: acl-mtu: 1021:5 sco-mtu: 96:6 link-policy: rswitch hold sniff
link-mode: slave accept service-classes: rendering, capturing, object transfer, audio
Drives: Local Storage: total: 141.51 GiB used: 16.8 GiB (11.9%)
ID-1: /dev/mmcblk0 maj-min: 179:0 type: USB vendor: SanDisk model: SC32G
size: 29.72 GiB block-size: physical: 512 B logical: 512 B type: SSD serial: <filter>
scheme: MBR
SMART Message: Unknown smartctl error. Unable to generate data.
SMART Message: Unable to run smartctl. Root privileges required.
ID-2: /dev/sda maj-min: 8:0 vendor: Kingston model: SUV400S37120G size: 111.79 GiB
block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s type: SSD serial: <filter>
rev: 96R9 scheme: GPT
Partition: ID-1: / raw-size: 105.91 GiB size: 103.69 GiB (97.90%) used: 16.79 GiB (16.2%) fs: ext4
dev: /dev/sda2 maj-min: 8:2
ID-2: /boot/efi raw-size: 256 MiB size: 252 MiB (98.46%) used: 282 KiB (0.1%) fs: vfat
dev: /dev/sda1 maj-min: 8:1
Swap: Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: partition size: 5.62 GiB used: 12.2 MiB (0.2%) priority: -2
dev: /dev/sda3 maj-min: 8:3
Sensors: System Temperatures: cpu: 37.0 C mobo: N/A
Fan Speeds (RPM): N/A
Repos: Packages: note: see --pkg apt: 2023 lib: 1025 flatpak: 0
No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
1: deb http://deb.debian.org/debian bullseye-updates main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian bullseye main contrib non-free
2: deb http://security.debian.org/debian-security bullseye-security main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://mirrors.dotsrc.org/mx-packages/mx/repo/ bullseye main non-free
Info: Processes: 200 Uptime: 1h 22m wakeups: 1 Memory: 7.59 GiB used: 1.08 GiB (14.2%)
Init: SysVinit v: 2.96 runlevel: 5 default: 5 tool: systemctl Compilers: gcc: N/A
alt: 10 Client: shell wrapper v: 5.1.4-release inxi: 3.3.06
Boot Mode: UEFI
