Post your hardware specs.

Message
Author
bmike1
Posts: 113
Joined: Mon Jul 23, 2012 8:35 pm

Re: Post your hardware specs.

#71 Post by bmike1 »

ancient desktop:

$ inxi -f
CPU: Single core Intel Pentium 4 (-UP-) cache: 256 KB
clocked at 1594 MHz
CPU Flags: acpi apic bts clflush cmov cx8 de dts fpu fxsr ht mca
mce mmx msr mtrr pae pat pebs pge pse pse36 sep ss sse sse2 tm tsc
vme
xbmc@xbmc:~
$ inxi -F
System: Host: xbmc Kernel: 3.12-0.bpo.1-686-pae i686 (32 bit)
Desktop: Xfce 4.10.2 Distro: MX-14 Symbiosis 24 March 2014
Machine: System: IBM product: 679011U
Mobo: IBM model: IBM Bios: IBM v: 20KT34AUS date: 04/24/2002
CPU: Single core Intel Pentium 4 (-UP-) cache: 256 KB
clocked at 1594 MHz
Graphics: Card: NVIDIA NV34 [GeForce FX 5200]
Display Server: X.Org 1.12.4 drivers: nouveau (unloaded: fbdev,vesa)
Resolution: 1024x768@60.0hz
GLX Renderer: Gallium 0.4 on NV34 GLX Version: 1.5 Mesa 8.0.5
Audio: Card Intel 82801BA/BAM AC'97 Audio Controller driver: snd_intel8x0
Sound: Advanced Linux Sound Architecture v: k3.12-0.bpo.1-686-pae
Network: Card: Intel 82801BA/BAM/CA/CAM Ethernet Controller driver: e100
IF: eth0 state: up speed: 100 Mbps duplex: full
mac: 00:09:6b:78:ab:f0
Drives: HDD Total Size: 48.0GB (30.4% used)
ID-1: /dev/sda model: ST340014A size: 40.0GB
ID-2: USB /dev/sdb model: USB_2.0_FD size: 8.0GB
Partition: ID-1: / size: 35G used: 4.3G (13%) fs: ext4 dev: /dev/sda1
ID-2: swap-1 size: 2.18GB used: 0.00GB (0%) fs: swap dev: /dev/sda2
Sensors: System Temperatures: cpu: 41.0C mobo: N/A
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 115 Uptime: 2 days Memory: 281.1/1134.5MB
Client: Shell (bash) inxi: 2.1.28
Last edited by bmike1 on Tue May 13, 2014 3:44 pm, edited 1 time in total.

bmike1
Posts: 113
Joined: Mon Jul 23, 2012 8:35 pm

Re: Post your hardware specs.

#72 Post by bmike1 »

sony vaio tower
when I was shorting the networking capabilities
$ inxi -F
System: Host: mx1 Kernel: 3.12-0.bpo.1-686-pae i686 (32 bit)
Desktop: Xfce 4.10.2 Distro: MX-14 Symbiosis 24 March 2014
Machine: System: Sony product: PCV-RX650(UC) v: 28403730
Mobo: ASUSTeK model: P4B266LM v: REV 1.xx
Bios: Award v: 1004 date: 04/24/2002
CPU: Single core Intel Pentium 4 CPU (-UP-) cache: 256 KB clocked at 1614 MHz
Graphics: Card: NVIDIA NV43 [GeForce 6600 GT]
Display Server: X.Org 1.12.4 driver: nvidia
Resolution: 1024x768@85.0hz
GLX Renderer: GeForce 6600 GT/AGP/SSE2
GLX Version: 2.1.2 NVIDIA 304.117
Audio: Card Intel 82801BA/BAM AC'97 Audio Controller driver: snd_intel8x0
Sound: Advanced Linux Sound Architecture v: k3.12-0.bpo.1-686-pae
Network: Card: Device 50ec:8139
IF: N/A state: N/A speed: N/A duplex: N/A mac: N/A
Drives: HDD Total Size: 80.1GB (0.0% used)
ID-1: /dev/sda model: ST380020A size: 80.0GB
USB ID-2: /dev/sdb model: Flash_Disk size: 0.1GB
Partition: ID-1: / size: 72G used: 3.1G (5%) fs: ext4 dev: /dev/sda1
ID-2: swap-1 size: 2.17GB used: 0.00GB (0%) fs: swap dev: /dev/sda2
Sensors: None detected - is lm-sensors installed and configured?
Info: Processes: 128 Uptime: 24 min Memory: 173.6/500.7MB
Client: Shell (bash) inxi: 2.1.18

after I took the screw I lost out of the case:

cat inxi
System: Host: mx1 Kernel: 3.12-0.bpo.1-686-pae i686 (32 bit)
Desktop: Xfce 4.10.2 Distro: MX-14 Symbiosis 24 March 2014
Machine: System: Sony product: PCV-RX650(UC) v: 28403730
Mobo: ASUSTeK model: P4B266LM v: REV 1.xx
Bios: Award v: 1004 date: 04/24/2002
CPU: Single core Intel Pentium 4 (-UP-) cache: 256 KB
clocked at 1614 MHz
Graphics: Card: NVIDIA NV43 [GeForce 6600 GT]
Display Server: X.Org 1.12.4 driver: nvidia
Resolution: 1024x768@85.0hz
GLX Renderer: GeForce 6600 GT/AGP/SSE2
GLX Version: 2.1.2 NVIDIA 304.117
Audio: Card Intel 82801BA/BAM AC'97 Audio Controller driver: snd_intel8x0
Sound: Advanced Linux Sound Architecture v: k3.12-0.bpo.1-686-pae
Network: Card: Realtek RTL-8139/8139C/8139C+ driver: 8139too
IF: eth0 state: unknown speed: 100 Mbps duplex: full
mac: 00:e0:18:66:71:14
Drives: HDD Total Size: 80.0GB (6.7% used)
ID-1: /dev/sda model: ST380020A size: 80.0GB
Partition: ID-1: / size: 72G used: 3.1G (5%) fs: ext4 dev: /dev/sda1
ID-2: swap-1 size: 2.17GB used: 0.00GB (0%) fs: swap dev: /dev/sda2
Sensors: None detected - is lm-sensors installed and configured?
Info: Processes: 110 Uptime: 3 min Memory: 145.6/500.7MB
Client: Shell (bash) inxi: 2.1.28
Last edited by bmike1 on Wed May 14, 2014 12:50 am, edited 4 times in total.

User avatar
BitJam
Developer
Posts: 2283
Joined: Sat Aug 22, 2009 11:36 pm

Re: Post your hardware specs.

#73 Post by BitJam »

Gaer Boy wrote:No luck with that, Tim - rmmod it87 gives "Module it87 is not currently loaded" and it doesn't appear to be present on the system.
That's strange. Maybe the module wasn't loaded but it should be on the system. Is this MX-14? The it87 module is here on my MX-14 system:

Code: Select all

/lib/modules/3.12-0.bpo.1-686-pae/kernel/drivers/hwmon/it87.ko

User avatar
Gaer Boy
Posts: 859
Joined: Sat Jun 06, 2009 6:06 am

Re: Post your hardware specs.

#74 Post by Gaer Boy »

BitJam wrote:
Gaer Boy wrote:No luck with that, Tim - rmmod it87 gives "Module it87 is not currently loaded" and it doesn't appear to be present on the system.
That's strange. Maybe the module wasn't loaded but it should be on the system. Is this MX-14? The it87 module is here on my MX-14 system:

Code: Select all

/lib/modules/3.12-0.bpo.1-686-pae/kernel/drivers/hwmon/it87.ko
Sorry - my mistake. I don't know how I missed it. I'll try again later - I'm tied up with an insurance claim.

Gigabyte B550I Aorus Pro AX, Ryzen 5 5600G, 16GB, 250GB Samsung SSD (GPT), 2x1TB HDD (MBR), MX-21-AHS
Lenovo Thinkpad X220, dual-core i5, 4MB, 120GB Samsung SSD (GPT), MX-21

User avatar
Richard
Posts: 1577
Joined: Fri Dec 12, 2008 10:31 am

Re: Post your hardware specs.

#75 Post by Richard »

From the desktop:

Code: Select all

richard@mx14:~
$ inxi -Fz
System:    Host: mx14 Kernel: 3.12-0.bpo.1-686-pae i686 (32 bit) Desktop: Xfce 4.10.2 
           Distro: MX-14 Symbiosis 24 March 2014 
Machine:   Mobo: ECS model: H61H2-CM v: 1.0
           Bios: American Megatrends v: 4.6.4 date: 10/21/2011
CPU:       Dual core Intel Pentium G620 (-MCP-) cache: 3072 KB 
           Clock Speeds: 1: 2502 MHz 2: 2582 MHz
Graphics:  Card: Intel 2nd Generation Core Processor Family Integrated Graphics Controller
           Display Server: X.Org 1.12.4 drivers: intel (unloaded: fbdev,vesa)
           Resolution: 1440x900@59.9hz
           GLX Renderer: Mesa DRI Intel Sandybridge Desktop x86/MMX/SSE2
           GLX Version: 3.0 Mesa 8.0.5
Audio:     Card Intel 6 Series/C200 Series Family High Definition Audio Controller 
           driver: snd_hda_intel 
           Sound: Advanced Linux Sound Architecture v: k3.12-0.bpo.1-686-pae
Network:   Card-1: Realtek RTL8111/8168B PCI Express Gigabit Ethernet controller
           driver: r8169
           IF: eth0 state: up speed: 100 Mbps duplex: full mac: <filter>
           Card-2: Ralink RT5390 Wireless 802.11n 1T/1R PCIe driver: rt2800pci
           IF: wlan0 state: down mac: <filter>
Drives:    HDD Total Size: 820.2GB (26.9% used)
           ID-1: /dev/sda model: WDC_WD5000AAKX size: 500.1GB
           ID-2: USB /dev/sdb model: Mobile_Drive_XXS size: 320.1GB
Partition: ID-1: / size: 24G used: 6.2G (28%) fs: ext4 dev: /dev/sda2 
           ID-2: swap-1 size: 2.55GB used: 0.00GB (0%) fs: swap dev: /dev/sda7 
Sensors:   System Temperatures: cpu: 49.0C mobo: N/A 
           Fan Speeds (in rpm): cpu: N/A 
Info:      Processes: 151 Uptime: 2:40 Memory: 492.4/1952.6MB 
           Client: Shell (bash) inxi: 2.1.28 
richard@mx14:~
$ 
Thinkpad T430 & Dell Latitude E7450, both with MX-21.3.1
kernal 5.10.0-26-amd64 x86_64; Xfce-4.18.0; 8 GB RAM
Intel Core i5-3380M, Graphics, Audio, Video; & SSDs.

User avatar
m_pav
Developer
Posts: 1390
Joined: Sun Aug 06, 2006 3:02 pm

Re: Post your hardware specs.

#76 Post by m_pav »

My Production Laptop with the 2GB ATI Graphics disabled.

Code: Select all

$ inxi -F
System:    Host: mikepav Kernel: 3.12-0.bpo.1-686-pae i686 (32 bit) Desktop: Xfce 4.10.2 
           Distro: MX-14 Symbiosis 24 March 2014 
Machine:   System: LENOVO product: 1143AB2 v: ThinkPad E520
           Mobo: LENOVO model: 1143AB2 Bios: LENOVO v: 8HET44WW(1.26) date: 08/07/2013
CPU:       Dual core Intel Core i7-2640M CPU (-HT-MCP-) cache: 4096 KB 
           Clock Speeds: 1: 1266 MHz 2: 799 MHz 3: 2337 MHz 4: 2070 MHz
Graphics:  Card: Intel 2nd Generation Core Processor Family Integrated Graphics Controller
           Display Server: X.Org 1.12.4 drivers: intel (unloaded: fbdev,vesa) Resolution: 1366x768@60.0hz
           GLX Renderer: Mesa DRI Intel Sandybridge Mobile x86/MMX/SSE2 GLX Version: 3.0 Mesa 8.0.5
Audio:     Card Intel 6 Series/C200 Series Family High Definition Audio Controller driver: snd_hda_intel 
           Sound: Advanced Linux Sound Architecture v: k3.12-0.bpo.1-686-pae
Network:   Card-1: Realtek RTL8111/8168B PCI Express Gigabit Ethernet controller driver: r8169
           IF: eth1 state: up speed: 1000 Mbps duplex: full mac: f0:de:f1:d4:19:23
           Card-2: Realtek RTL8188CE 802.11b/g/n WiFi Adapter driver: rtl8192ce
           IF: wlan1 state: down mac: 9c:b7:0d:51:db:80
Drives:    HDD Total Size: 750.2GB (54.1% used) ID-1: /dev/sda model: ST750LX003 size: 750.2GB
Partition: ID-1: / size: 20G used: 4.6G (25%) fs: ext4 dev: /dev/sda1 
           ID-2: /home size: 493G used: 264G (57%) fs: ext4 dev: /dev/sda2 
           ID-3: swap-1 size: 4.29GB used: 0.00GB (0%) fs: swap dev: /dev/sda6 
Sensors:   System Temperatures: cpu: 51.0C mobo: N/A 
           Fan Speeds (in rpm): cpu: 0 
Info:      Processes: 198 Uptime: 3 days Memory: 1205.9/8022.9MB Client: Shell (bash) inxi: 2.1.18 
Mike P

Regd Linux User #472293
(Daily) Lenovo T560, i7-6600U, 16GB, 2.0TB SSD, MX_ahs
(ManCave) AMD FX 6100 CPU, nVidia, 8Gb, 3.25TB mixed, MX_ahs
(Spare)2017 Macbook Air 7,2, 8GB, 256GB SSD, MX_ahs

User avatar
entropyfoe
Posts: 590
Joined: Thu Apr 19, 2007 11:42 am

Re: Post your hardware specs.

#77 Post by entropyfoe »

Just for fun, I added some benchmarks from the MX-14 bechmarking applications under System -> System profiler and Benchmark.

http://forum.mepiscommunity.org/viewtop ... 42#p337142

Added the benchmarks next to the hardware specs - a nice resource for system builders or buyers.
Not sure if ther is any data on these benchmarks in different hardwares?
Asus PRIME X470-PRO
AMD Ryzen 3600X (12 threads @ 3.8 GHz)
32 Gig DDR4 3600 (Crucial CL 16)
Nvidia GeForce GT 710
Samsung 970 NVMe nvme0n1 P1-3=MX-23, P4=testing
Samsung 980 NVMe =1TB Data, plus 2TB WD =backups
on-board ethernet & sound

User avatar
sps7
Posts: 78
Joined: Fri Jul 21, 2006 3:57 pm

Re: Post your hardware specs.

#78 Post by sps7 »

For favored desktop tower (of 2):

Code: Select all

$ inxi -F

System:    Host: mx1-daktech Kernel: 3.12-0.bpo.1-686-pae i686 (32 bit) Desktop: KDE 4.8.4 
           Distro: MX-14 Symbiosis 24 March 2014 
Machine:   System: DakTech product: Discovery8 v: 2009
           Mobo: Intel model: DG41RQ v: AAE54511-202
           Bios: Intel v: RQG4110H.86A.0010.2009.0408.1515 date: 04/08/2009
CPU:       Dual core Intel Core2 Duo E8500 (-MCP-) cache: 6144 KB 
           Clock Speeds: 1: 3163 MHz 2: 3163 MHz
Graphics:  Card: Intel 4 Series Integrated Graphics Controller
           Display Server: X.Org 1.12.4 drivers: intel (unloaded: fbdev,vesa) Resolution: 1280x1024@60.0hz
           GLX Renderer: Mesa DRI Intel G41 x86/MMX/SSE2 GLX Version: 2.1 Mesa 8.0.5
Audio:     Card Intel NM10/ICH7 Family High Definition Audio Controller driver: snd_hda_intel 
           Sound: Advanced Linux Sound Architecture v: k3.12-0.bpo.1-686-pae
Network:   Card: Realtek RTL8111/8168B PCI Express Gigabit Ethernet controller driver: r8169
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac: 00:1c:c0:ca:00:e1
Drives:    HDD Total Size: 400.1GB (34.8% used) ID-1: /dev/sda model: ST3400832AS size: 400.1GB
Partition: ID-1: / size: 15G used: 5.4G (39%) fs: ext4 dev: /dev/sda1 
           ID-2: /home size: 349G used: 121G (37%) fs: ext4 dev: /dev/sda3 
           ID-3: swap-1 size: 4.06GB used: 0.00GB (0%) fs: swap dev: /dev/sda2 
Sensors:   System Temperatures: cpu: 40.0C mobo: N/A 
           Fan Speeds (in rpm): cpu: N/A 
Info:      Processes: 150 Uptime: 10:57 Memory: 1369.3/4010.2MB Client: Shell (bash) inxi: 2.1.28

For desktop tower #2:

Code: Select all

$ inxi -F
System:    Host: mx1-sps Kernel: 3.12-0.bpo.1-686-pae i686 (32 bit) 
           Desktop: Xfce 4.10.2 Distro: MX-14 Symbiosis 24 March 2014 
Machine:   System: IBM product: 8415KUT
           Mobo: IBM model: IBM Bios: IBM v: 2AKT48AUS date: 01/18/2005
CPU:       Single core Intel Pentium 4 (-HT-) cache: 1024 KB 
           Clock Speeds: 1: 2992 MHz 2: 2992 MHz
Graphics:  Card: Intel 82865G Integrated Graphics Controller
           Display Server: X.Org 1.12.4 drivers: intel (unloaded: fbdev,vesa)
           Resolution: 1024x768@60.0hz
           GLX Renderer: Mesa DRI Intel 865G x86/MMX/SSE2 GLX Version: 1.3 Mesa 8.0.5
Audio:     Card Intel 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller 
           driver: snd_intel8x0 
           Sound: Advanced Linux Sound Architecture v: k3.12-0.bpo.1-686-pae
Network:   Card: Intel 82541EI Gigabit Ethernet Controller driver: e1000
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac: 00:11:25:27:51:13
Drives:    HDD Total Size: 80.0GB (10.3% used)
           ID-1: /dev/sda model: WDC_WD800BB size: 80.0GB
Partition: ID-1: / size: 9.2G used: 4.5G (52%) fs: ext4 dev: /dev/sda1 
           ID-2: /home size: 62G used: 652M (2%) fs: ext4 dev: /dev/sda3 
           ID-3: swap-1 size: 2.92GB used: 0.00GB (0%) fs: swap dev: /dev/sda2 
Sensors:   System Temperatures: cpu: 67.0C mobo: N/A 
           Fan Speeds (in rpm): cpu: N/A 
Info:      Processes: 157 Uptime: 10:55 Memory: 856.2/3515.9MB 
           Client: Shell (bash) inxi: 2.1.28

User avatar
Gaer Boy
Posts: 859
Joined: Sat Jun 06, 2009 6:06 am

Re: Post your hardware specs.

#79 Post by Gaer Boy »

Gaer Boy wrote:Newly-built mITX system.

$ inxi -F
System: Host: annesroom Kernel: 3.12-0.bpo.1-686-pae i686 (32 bit) Desktop: Xfce 4.10.2
Distro: MX-14 Symbiosis 22 March 2014
Machine: Mobo: ASRock model: FM2A88X-ITX+ Bios: American Megatrends v: P2.10 date: 01/17/2014
CPU: Quad core AMD A8-6500 APU with Radeon HD Graphics (-MCP-) cache: 8192 KB
Clock Speeds: 1: 1700 MHz 2: 1700 MHz 3: 1700 MHz 4: 1700 MHz
Graphics: Card: Advanced Micro Devices [AMD] ATI Device 990e
Display Server: X.Org 1.12.4 drivers: fbdev,ati,vesa (unloaded: radeon) Resolution: 1280x1024@0.0hz
GLX Renderer: Gallium 0.4 on llvmpipe (LLVM 0x209) GLX Version: 2.1 Mesa 8.0.5
Audio: Card-1: Advanced Micro Devices [AMD] FCH Azalia Controller driver: snd_hda_intel
Card-2: Advanced Micro Devices [AMD] ATI Trinity HDMI Audio Controller driver: snd_hda_intel
Sound: Advanced Linux Sound Architecture v:: k3.12-0.bpo.1-686-pae
Network: Card-1: Atheros Device 10a1 driver: alx
IF: eth1 state: up speed: 100 Mbps duplex: full mac: d0:50:99:0e:a6:61
Card-2: Atheros AR9462 Wireless Network Adapter driver: ath9k
IF: wlan0 state: down mac: 54:27:1e:1a:5f:dc
Drives: HDD Total Size: 750.2GB (10.5% used) 1: id: /dev/sdb model: SAMSUNG_HD502HJ size: 500.1GB
2: id: /dev/sda model: SAMSUNG_SP2504C size: 250.1GB
Partition: ID: / size: 20G used: 2.6G (15%) fs: ext4 ID: swap-1 size: 2.99GB used: 0.00GB (0%) fs: swap
Sensors: System Temperatures: cpu: 6.2C mobo: N/A gpu: 5.0
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 158 Uptime: 3 min Memory: 232.2/7012.6MB Client: Shell (bash) inxi: 2.1.7
I've now completed the update of this machine, adding an SSD and switching HDDs with the old machine. Here's the new spec.

Code: Select all

$ inxi -F
System:    Host: officeitx Kernel: 3.12-0.bpo.1-686-pae i686 (32 bit) 
           Desktop: Xfce 4.10.2 Distro: MX-14 Symbiosis 24 March 2014 
Machine:   Mobo: ASRock model: FM2A88X-ITX+
           Bios: American Megatrends v: P2.10 date: 01/17/2014
CPU:       Quad core AMD A8-6500 APU with Radeon HD Graphics (-MCP-) cache: 8192 KB 
           Clock Speeds: 1: 1700 MHz 2: 2700 MHz 3: 1700 MHz 4: 1700 MHz
Graphics:  Card: Advanced Micro Devices [AMD] ATI Device 990e
           Display Server: X.Org 1.12.4 drivers: fbdev,ati,vesa (unloaded: radeon)
           Resolution: 1920x1080@0.0hz
           GLX Renderer: Gallium 0.4 on llvmpipe (LLVM 0x209)
           GLX Version: 2.1 Mesa 8.0.5
Audio:     Card Advanced Micro Devices [AMD] FCH Azalia Controller 
           driver: snd_hda_intel 
           Sound: Advanced Linux Sound Architecture v: k3.12-0.bpo.1-686-pae
Network:   Card-1: Atheros Device 10a1 driver: alx
           IF: eth0 state: up speed: 100 Mbps duplex: full 
           mac: d0:50:99:0e:a6:61
           Card-2: Atheros AR9462 Wireless Network Adapter driver: ath9k
           IF: wlan0 state: down mac: 54:27:1e:1a:5f:dc
Drives:    HDD Total Size: 1120.2GB (11.8% used)
           ID-1: /dev/sdb model: ST1000DM005_HD10 size: 1000.2GB
           ID-2: /dev/sda model: Samsung_SSD_840 size: 120.0GB
Partition: ID-1: / size: 12G used: 4.3G (40%) fs: ext4 dev: /dev/sda1 
Sensors:   System Temperatures: cpu: 14.0C mobo: N/A gpu: 12.0 
           Fan Speeds (in rpm): cpu: N/A 
Info:      Processes: 168 Uptime: 18:18 Memory: 529.9/7012.6MB 
           Client: Shell (bash) inxi: 2.1.28 
I will report further on the machine in separate topics.

Gigabyte B550I Aorus Pro AX, Ryzen 5 5600G, 16GB, 250GB Samsung SSD (GPT), 2x1TB HDD (MBR), MX-21-AHS
Lenovo Thinkpad X220, dual-core i5, 4MB, 120GB Samsung SSD (GPT), MX-21

User avatar
asqwerth
Developer
Posts: 7211
Joined: Sun May 27, 2007 5:37 am

Re: Post your hardware specs.

#80 Post by asqwerth »

Code: Select all

$ inxi -F
System:    Host: mx1-tuaz Kernel: 3.12-0.bpo.1-686-pae i686 (32 bit) 
           Desktop: Xfce 4.10.2 Distro: MX-14 Symbiosis 24 March 2014 
Machine:   System: Dell product: Dell DM051
           Mobo: Dell model: 0RD203 Bios: Dell v: A00 date: 08/15/2005
CPU:       Single core Intel Pentium 4 (-HT-) cache: 2048 KB 
           Clock Speeds: 1: 3192 MHz 2: 3192 MHz
Graphics:  Card: Advanced Micro Devices [AMD] ATI RV370 5B60 [Radeon X300 (PCIE)]
           Display Server: X.Org 1.12.4 drivers: ati,radeon (unloaded: fbdev,vesa)
           Resolution: 1280x1024@60.0hz
           GLX Renderer: Gallium 0.4 on ATI RV370 GLX Version: 2.1 Mesa 8.0.5
Audio:     Card Creative Labs [SB Live! Value] EMU10k1X driver: snd_emu10k1x 
           Sound: Advanced Linux Sound Architecture v: k3.12-0.bpo.1-686-pae
Network:   Card: Intel NM10/ICH7 Family LAN Controller driver: e100
           IF: eth0 state: up speed: 100 Mbps duplex: full 
           mac: 00:12:3f:b1:5f:89
Drives:    HDD Total Size: 240.0GB (21.4% used)
           ID-1: /dev/sdb model: Maxtor_6L080M0 size: 80.0GB
           ID-2: /dev/sda model: SAMSUNG_HD160JJ size: 160.0GB
Partition: ID-1: / size: 21G used: 3.7G (20%) fs: ext4 dev: /dev/sda2 
           ID-2: swap-1 size: 2.05GB used: 0.03GB (1%) fs: swap dev: /dev/sda7 
           ID-3: swap-2 size: 2.81GB used: 0.00GB (0%) fs: swap dev: /dev/sdb10 
Sensors:   None detected - is lm-sensors installed and configured?
Info:      Processes: 153 Uptime: 2 days Memory: 500.7/1006.6MB 
           Client: Shell (bash) inxi: 2.1.28 

Post Reply

Return to “Older Versions”