After updated Suspension isn't working right! [Solved]

[aldQueiroz]

Hi, folks. Well, I've experiencing an issue with hibernation AND suspension of the system... After a recent system update (I don't know of exactly which package...) my system isn't going to hibernation neither suspension as it was supposed to go. Herewith attached there's a screen capture with the warning . But I realized it is related to Firefox! I did call suspension before through Action button and it worked "apparently" normal, bu only when Firefox wasn't running.. I use Vivaldi browser too, but I have not checked out yet if open tabs with Vivaldi can cause the same issue...
I have mentioned this trouble at another thread; however, as suggested, I'm opening this new one in order to allow me assign it as solved once I get the due answer!
Here, the QAS :

Code: Select all

Snapshot created on: 20210111_1539
System:    Host: <filter> Kernel: 5.10.0-8.1-liquorix-amd64 x86_64 bits: 64 compiler: N/A 
           parameters: audit=0 intel_pstate=disable 
           BOOT_IMAGE=/boot/vmlinuz-5.10.0-8.1-liquorix-amd64 
           root=UUID=<filter> ro audit=0 intel_pstate=disable splash 
           quiet 
           Desktop: Xfce 4.14.2 tk: Gtk 3.24.5 info: xfce4-panel wm: xfwm4 dm: LightDM 1.26.0 
           Distro: MX-19.3_ahs_x64 patito feo February 15  2019 
           base: Debian GNU/Linux 10 (buster) 
Machine:   Type: Desktop Mobo: ASUSTeK model: M5A78L-M LX/BR v: Rev X.0x serial: <filter> 
           BIOS: American Megatrends v: 1101 date: 04/19/2013 
CPU:       Topology: Dual Core model: AMD Athlon II X2 240 bits: 64 type: MCP arch: K10 
           family: 10 (16) model-id: 6 stepping: 2 microcode: 10000C7 L2 cache: 2048 KiB 
           flags: lm nx pae sse sse2 sse3 sse4a svm bogomips: 11249 
           Speed: 2800 MHz min/max: 800/2800 MHz Core speeds (MHz): 1: 2800 2: 2800 
           Vulnerabilities: Type: itlb_multihit status: Not affected 
           Type: l1tf status: Not affected 
           Type: mds status: Not affected 
           Type: meltdown status: Not affected 
           Type: spec_store_bypass status: Not affected 
           Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization 
           Type: spectre_v2 mitigation: Full AMD retpoline, STIBP: disabled, RSB filling 
           Type: srbds status: Not affected 
           Type: tsx_async_abort status: Not affected 
Graphics:  Device-1: AMD Cedar [Radeon HD 5000/6000/7350/8350 Series] 
           vendor: Hightech Information System driver: radeon v: kernel bus ID: 01:00.0 
           chip ID: 1002:68f9 
           Display: x11 server: X.Org 1.20.9 driver: ati,radeon unloaded: fbdev,modesetting,vesa 
           resolution: 1920x1080~60Hz 
           OpenGL: renderer: AMD CEDAR (DRM 2.50.0 / 5.10.0-8.1-liquorix-amd64 LLVM 10.0.0) 
           v: 3.3 Mesa 20.1.8 compat-v: 3.1 direct render: Yes 
Audio:     Device-1: AMD SBx00 Azalia vendor: ASUSTeK driver: snd_hda_intel v: kernel 
           bus ID: 00:14.2 chip ID: 1002:4383 
           Device-2: AMD Cedar HDMI Audio [Radeon HD 5400/6300/7300 Series] 
           vendor: Hightech Information System driver: snd_hda_intel v: kernel bus ID: 01:00.1 
           chip ID: 1002:aa68 
           Device-3: Logitech OrbiCam type: USB driver: snd-usb-audio,uvcvideo bus ID: 1-3:2 
           chip ID: 046d:0892 serial: <filter> 
           Sound Server: ALSA v: k5.10.0-8.1-liquorix-amd64 
Network:   Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet 
           vendor: ASUSTeK P8P67 and other motherboards driver: r8169 v: kernel port: e800 
           bus ID: 02:00.0 chip ID: 10ec:8168 
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter> 
Drives:    Local Storage: total: 1.02 TiB used: 96.58 GiB (9.3%) 
           ID-1: /dev/sda vendor: Western Digital model: WD10EZEX-00RKKA0 size: 931.51 GiB 
           block size: physical: 4096 B logical: 512 B speed: 3.0 Gb/s serial: <filter> 
           rev: 0A80 scheme: MBR 
           ID-2: /dev/sdb vendor: Kingston model: SA400S37120G size: 111.79 GiB block size: 
           physical: 512 B logical: 512 B speed: 3.0 Gb/s serial: <filter> rev: B1E2 scheme: MBR 
Partition: ID-1: / raw size: 55.89 GiB size: 54.77 GiB (97.98%) used: 15.28 GiB (27.9%) fs: ext4 
           dev: /dev/sdb1 
           ID-2: /home raw size: 435.66 GiB size: 427.82 GiB (98.20%) used: 81.31 GiB (19.0%) 
           fs: ext4 dev: /dev/sda3 
Sensors:   System Temperatures: cpu: 37.4 C mobo: N/A gpu: radeon temp: 41 C 
           Fan Speeds (RPM): N/A gpu: radeon fan: 0 
Repos:     No active apt repos in: /etc/apt/sources.list 
           Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list 
           1: deb http://mirror.unesp.br/debian/ buster-updates main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/debian.list 
           1: deb http://mirror.unesp.br/debian/ buster main contrib non-free
           2: deb http://deb.debian.org/debian-security/ buster/updates main contrib non-free
           3: deb http://mirror.unesp.br/debian/ buster-backports non-free contrib main
           Active apt repos in: /etc/apt/sources.list.d/google-chrome.list 
           1: deb [arch=amd64] http://dl.google.com/linux/chrome/deb/ stable main
           Active apt repos in: /etc/apt/sources.list.d/mx.list 
           1: deb https://mirrors.evowise.com/mxlinux-packages/mx/repo/ buster main non-free
           2: deb https://mirrors.evowise.com/mxlinux-packages/mx/repo/ buster ahs
           Active apt repos in: /etc/apt/sources.list.d/skype-stable.list 
           1: deb [arch=amd64] https://repo.skype.com/deb/ stable main
           Active apt repos in: /etc/apt/sources.list.d/softmaker.list 
           1: deb https://shop.softmaker.com/repo/apt/ wheezy non-free
           No active apt repos in: /etc/apt/sources.list.d/various.list 
           Active apt repos in: /etc/apt/sources.list.d/vivaldi.list 
           1: deb http://repo.vivaldi.com/stable/deb/ stable main
Info:      Processes: 235 Uptime: 2d 20h 34m Memory: 7.77 GiB used: 2.53 GiB (32.5%) 
           Init: SysVinit v: 2.93 runlevel: 5 default: 5 Compilers: gcc: 8.3.0 alt: 8 
           Shell: quick-system-in running in: quick-system-in inxi: 3.0.36 

I'm sure there's plenty of memory at my /swap partition : 13 GB, while there're 8 GB of RAM !
Any clue of what is happening?...

[dolphin_oracle]

I don't think your swap is actually in use. have you formatted it lately?

post:

Code: Select all

sudo blkid
free
cat /etc/fstab

thanks!

[aldQueiroz]

I don't think your swap is actually in use. have you formatted it lately?

post:

Code: Select all

sudo blkid
free
cat /etc/fstab

thanks!

Well, I've changed the location of my /root to my SSD, but haven't unchanged /home and /swap still at the HDD (or, at least, I supposed both were kept unchanged AND active at the new configuration...)

Code: Select all

andre_luiz@MFD:~$ sudo blkid
/dev/sda1: LABEL="root" UUID="9431ee8c-a90c-418f-8625-1e15f967e65c" TYPE="ext4" PTTYPE="dos" PARTUUID="00069a93-01"
/dev/sda3: UUID="074d7a5b-99f4-4f2e-9c84-95e7a99a4af0" TYPE="ext4" PARTUUID="00069a93-03"
/dev/sda5: UUID="b32432d3-11d4-4280-a562-ee6b40533203" TYPE="swap"
/dev/sdb1: LABEL="rootMX19" UUID="7d912431-579c-4658-aec5-e6f737377dee" TYPE="ext4" PARTUUID="00092a26-01"
andre_luiz@MFD:~$ free
              total        used        free      shared  buff/cache   available
Mem:        8151716     2614860     1625056      302080     3911800     4929908
Swap:             0           0           0
andre_luiz@MFD:~$ cat /etc/fstab
# Pluggable devices are handled by uDev, they are not in fstab
UUID=7d912431-579c-4658-aec5-e6f737377dee / ext4 defaults,noatime 1 1
UUID=074d7a5b-99f4-4f2e-9c84-95e7a99a4af0 /home ext4 defaults,noatime 1 2
UUID=b32432d3-11d4-4280-a562-ee6b40533203 swap swap defaults 0 0 
andre_luiz@MFD:~$ Jū-Nihon‑meRan'ai

[dolphin_oracle]

the fstab looks right, and the blkid looks ok, but the swap isn't being used.

try

Code: Select all

sudo swapon -a

the

Code: Select all

free

to see the results.

[aldQueiroz]

the fstab looks right, and the blkid looks ok, but the swap isn't being used.

try

Code: Select all

sudo swapon -a

the

Code: Select all

free

to see the results.

The result was...

Code: Select all

andre_luiz@MFD:~$ sudo swapon -a
[sudo] senha para andre_luiz: 
swapon: /dev/sda5: swapon failed: Argumento inválido
andre_luiz@MFD:~$ 

"invalid argument" ?!?!...

[dolphin_oracle]

something is wrong with that swap.

do any other distro installations use that swap partition.

[dolphin_oracle]

your swap is missing a partition UUUID. here's what mine looks like

Code: Select all

sudo blkid |grep swap
/dev/sda7: LABEL="swap" UUID="692bddf8-4195-4ccb-90ba-5efeaa4b7f20" TYPE="swap" PARTUUID="364d9d45-e274-459f-a5df-89d8a408ea94"

[aldQueiroz]

something is wrong with that swap.

do any other distro installations use that swap partition.

No, that /swap (and, currently, all HDD device) is in use with MX Linux only!...

your swap is missing a partition UUUID. here's what mine looks like

Code: Select all

sudo blkid |grep swap
/dev/sda7: LABEL="swap" UUID="692bddf8-4195-4ccb-90ba-5efeaa4b7f20" TYPE="swap" PARTUUID="364d9d45-e274-459f-a5df-89d8a408ea94"

I see... I suppose that was a consequence of HDD to SSD migration process, which I didn't succeed at first try...
How can I change swap UUID? Using Gparted, perhaps?...

[Huckleberry Finn]

Edit: Yes, PARTUUID= ... is missing at the end.

Maybe you can do it on live-session particularly:

GParted: Right-click delete sda5 , then recreate a swap partition there (the new name may not be sda5 , will be probably sda6 , nothing to worry..),

then change the UUID in fstab ( b32432d3-11d4-4280-a562-ee6b40533203 ) to the new one, save.. (Just remember not to confuse the /etc .. : not the /etc of the live session, but the one in the MX partition, labeled rootMX19 )

Finally "Chroot Rescue Scan" from Menu.. hit Enter when it finds your installed MX .. and it turns into a terminal with this prompt

chroot>

issue:

Code: Select all

update-initramfs -uk all

If you say you can do that ...
_____________________________________

P.S. Yes, maybe just "check" or reformat etc. might work, but this will be a "clean job" . :)

[aldQueiroz]

Ok, I'll try to do it later.
Thanks to all!