For PDF files i have install foxreader.
I don't see this option when open right click menu up to PDF file.
for open it must run appimage from beginning.
can you help me ?
foxreader works only from apimage
Re: foxreader works only from apimage
@dimzev,
Welcome to the forum.
You seem to be having unusual problems in your 3 posts, so far.
We will need some information about your computer. Find the Quick System Information in the menu, click on it, then open a new reply under this topic, click in the new post, then right click and Insert or Paste.
Also, tell us which version you have installed.
regards, Richard.
Welcome to the forum.
You seem to be having unusual problems in your 3 posts, so far.
We will need some information about your computer. Find the Quick System Information in the menu, click on it, then open a new reply under this topic, click in the new post, then right click and Insert or Paste.
Also, tell us which version you have installed.
regards, Richard.
Thinkpad T430 & Dell Latitude E7450, both with MX-21.3.1
kernal 5.10.0-26-amd64 x86_64; Xfce-4.18.0; 8 GB RAM
Intel Core i5-3380M, Graphics, Audio, Video; & SSDs.
kernal 5.10.0-26-amd64 x86_64; Xfce-4.18.0; 8 GB RAM
Intel Core i5-3380M, Graphics, Audio, Video; & SSDs.
Re: foxreader works only from apimage
In MX 18.3, the current stable version, there are already installed a PDF reader that should open PDF files by default.
Thinkpad T430 & Dell Latitude E7450, both with MX-21.3.1
kernal 5.10.0-26-amd64 x86_64; Xfce-4.18.0; 8 GB RAM
Intel Core i5-3380M, Graphics, Audio, Video; & SSDs.
kernal 5.10.0-26-amd64 x86_64; Xfce-4.18.0; 8 GB RAM
Intel Core i5-3380M, Graphics, Audio, Video; & SSDs.
Re: foxreader works only from apimage
Ok, my eyes are open. I see you are using antiX.
For that you'll need to run, in a terminal,
copy the output, open a post to the forum, click on the
[ code ] paste the output here between [ /code ]
without the spaces within the brackets,
which greatly enhances readability of the data.
For that you'll need to run, in a terminal,
Code: Select all
inxi -Fxzr
[ code ] paste the output here between [ /code ]
without the spaces within the brackets,
which greatly enhances readability of the data.
Thinkpad T430 & Dell Latitude E7450, both with MX-21.3.1
kernal 5.10.0-26-amd64 x86_64; Xfce-4.18.0; 8 GB RAM
Intel Core i5-3380M, Graphics, Audio, Video; & SSDs.
kernal 5.10.0-26-amd64 x86_64; Xfce-4.18.0; 8 GB RAM
Intel Core i5-3380M, Graphics, Audio, Video; & SSDs.
Re: foxreader works only from apimage
the PDF reader installed in antiX 17 is Evince.
in antiX 19beta is Qpdfview.
in antiX 19beta is Qpdfview.
Thinkpad T430 & Dell Latitude E7450, both with MX-21.3.1
kernal 5.10.0-26-amd64 x86_64; Xfce-4.18.0; 8 GB RAM
Intel Core i5-3380M, Graphics, Audio, Video; & SSDs.
kernal 5.10.0-26-amd64 x86_64; Xfce-4.18.0; 8 GB RAM
Intel Core i5-3380M, Graphics, Audio, Video; & SSDs.
Re: foxreader works only from apimage
Code: Select all
dim@antix1:~
$ inxi -Fxzr
System:
Host: antix1 Kernel: 4.9.160-antix.2-486-smp i686 bits: 32 compiler: gcc v: 6.3.0
Desktop: IceWM 1.4.2 Distro: antiX-17.4.1_386-full Helen Keller 28 March 2019
base: Debian GNU/Linux 9 (stretch)
Machine:
Type: Laptop System: Hewlett-Packard product: HP Compaq 6730b (GW687AV) v: F.08
serial: <filter>
Mobo: Hewlett-Packard model: 30DD v: KBC Version 96.18 serial: <filter>
BIOS: Hewlett-Packard v: 68PDD Ver. F.08 date: 09/18/2008
Battery:
ID-1: BAT0 charge: 45.8 Wh condition: 46.6/46.6 Wh (100%)
model: Hewlett-Packard Primary status: Unknown
CPU:
Topology: Dual Core model: Intel Core2 Duo P8400 bits: 64 type: MCP arch: Penryn
rev: 6 L2 cache: 3072 KiB
flags: lm nx pae sse sse2 sse3 sse4_1 ssse3 vmx bogomips: 9043
Speed: 2267 MHz min/max: 800/2267 MHz Core speeds (MHz): 1: 2267 2: 800
Graphics:
Device-1: Intel Mobile 4 Series Integrated Graphics vendor: Hewlett-Packard
driver: i915 v: kernel bus ID: 00:02.0
Display: server: X.Org 1.19.2 driver: modesetting unloaded: fbdev,vesa
resolution: 1280x800~60Hz
OpenGL: renderer: Mesa DRI Mobile Intel GM45 Express x86/MMX/SSE2 v: 2.1 Mesa 13.0.6
direct render: Yes
Audio:
Device-1: Intel 82801I HD Audio vendor: Hewlett-Packard driver: snd_hda_intel
v: kernel bus ID: 00:1b.0
Sound Server: ALSA v: k4.9.160-antix.2-486-smp
Network:
Device-1: Broadcom Limited BCM4312 802.11b/g LP-PHY vendor: Hewlett-Packard
driver: wl v: kernel port: 6000 bus ID: 02:00.0
IF: wlan0 state: up mac: <filter>
Device-2: Broadcom Limited NetLink BCM5787M Gigabit Ethernet PCI Express
vendor: Hewlett-Packard driver: tg3 v: 3.137 port: 6000 bus ID: 85:00.0
IF: eth0 state: down mac: <filter>
Drives:
Local Storage: total: 111.79 GiB used: 7.07 GiB (6.3%)
ID-1: /dev/sda vendor: Toshiba model: MK1252GSX size: 111.79 GiB
Partition:
ID-1: / size: 17.40 GiB used: 3.49 GiB (20.0%) fs: ext4 dev: /dev/sda3
ID-2: /home size: 20.84 GiB used: 793.5 MiB (3.7%) fs: ext4 dev: /dev/sda4
ID-3: swap-1 size: 6.52 GiB used: 400 KiB (0.0%) fs: swap dev: /dev/sda5
Sensors:
System Temperatures: cpu: 46.0 C mobo: 43.0 C
Fan Speeds (RPM): N/A
Repos:
Active apt repos in: /etc/apt/sources.list.d/antix.list
1: deb http://ftp.cc.uoc.gr/mirrors/linux/mx/antix/stretch stretch main nosystemd nonfree
Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
1: deb http://ftp.gr.debian.org/debian/ stretch-updates main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://ftp.gr.debian.org/debian/ stretch main contrib non-free
2: deb http://security.debian.org/ stretch/updates main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/geogebra.list
1: deb http://www.geogebra.net/linux/ stable main
No active apt repos in: /etc/apt/sources.list.d/onion.list
No active apt repos in: /etc/apt/sources.list.d/various.list
Info:
Processes: 160 Uptime: 3h 07m Memory: 1.90 GiB used: 706.1 MiB (36.3%)
Init: SysVinit runlevel: 5 Compilers: gcc: 6.3.0 Shell: bash v: 4.4.12 inxi: 3.0.33
-evince
-mupdf
and work both of them .
i need foxreader because have options dont have the above PDF reader.
thank you very much Richard for your help
can you tell me if my laptop is 64 or 32 ?
Re: foxreader works only from apimage
In your data above it says you are running:
System:
Host: antix1 Kernel: 4.9.160-antix.2-486-smp i686 bits: 32 compiler: gcc v: 6.3.0
Your system is capable of running 64-bit according to the HP specs I looked at. I recommend trying 64-bit from a LiveUSB to test it out. Personally I prefer sticking with 64-bit if at all possible. Many 32-bit apps are going away. 32-bit is all but gone.... sorry.
btw
Edit: Here's the HP link: https://support.hp.com/us-en/document/c01324212
System:
Host: antix1 Kernel: 4.9.160-antix.2-486-smp i686 bits: 32 compiler: gcc v: 6.3.0
Your system is capable of running 64-bit according to the HP specs I looked at. I recommend trying 64-bit from a LiveUSB to test it out. Personally I prefer sticking with 64-bit if at all possible. Many 32-bit apps are going away. 32-bit is all but gone.... sorry.
btw
Edit: Here's the HP link: https://support.hp.com/us-en/document/c01324212
Pax vobiscum,
Mark Rabideau - ManyRoads Genealogy -or- eirenicon llc. (geeky stuff)
i3wm, bspwm, hlwm, dwm, spectrwm ~ Linux #449130
"For every complex problem there is an answer that is clear, simple, and wrong." -- H. L. Mencken
Mark Rabideau - ManyRoads Genealogy -or- eirenicon llc. (geeky stuff)
i3wm, bspwm, hlwm, dwm, spectrwm ~ Linux #449130
"For every complex problem there is an answer that is clear, simple, and wrong." -- H. L. Mencken