Welcome!

The kernel problem with recent updates has been solved. Find the solution here

Important information
-- Required MX 15/16 Repository Changes
-- Information on torrent hosting changes
-- Information on MX15/16 GPG Keys
-- Spectre and Meltdown vulnerabilities

News
-- Introducing our new Website
-- MX Linux on social media: here

Current releases
-- MX-18.3 Point Release release info here
-- Migration Information to MX-18 here
-- antiX-17.4.1 release info here

New users
-- Please read this first, and don't forget to add system and hardware information to posts!
-- Here are the Forum Rules

kein Sound trotz Soundkarte (solved)

Post Reply
Nordhenne
Forum Novice
Forum  Novice
Posts: 8
Joined: Sun Aug 18, 2019 6:14 am

kein Sound trotz Soundkarte (solved)

#1

Post by Nordhenne » Sun Aug 18, 2019 8:26 am

Ich habe MX gestern erst frisc aufgesetzt und noch kaum Erfahrung mit MX.
Leider habe ich weder Systemtöne, noch sonstigen Sound.
Ich habe sowohl die Lautstärke hochgeschraubt, als auch den Mixer kontrolliert.
Eigentlich sollte ich Sound haben. Jemand eine Idee, was ich noch probieren kann bzw, wo ich kontrollieren könnte?
Sehr gerne auf Sesamstraßen-Niveau.

Ich nutze MX 18.2 auf einem Ryzen3, 2200G auf einer 1000GB HDD. Eine unbenutzte SDD mit 128 GB ist auch im System.
Danke für jegliche Hilfe.

Code: Select all

$ inxi -F
System:    Host: mx.anni Kernel: 4.19.0-1-amd64 x86_64 bits: 64 Desktop: Xfce 4.12.3 
           Distro: MX-18.3_x64 Continuum Apr 7  2019 
Machine:   Type: Desktop System: HP product: HP Pavilion Desktop 590-p0xxx v: N/A 
           serial: <root required> 
           Mobo: HP model: 8433 v: 11 serial: <root required> UEFI: AMI v: F.20 date: 10/26/2018 
CPU:       Topology: Quad Core model: AMD Ryzen 3 2200G with Radeon Vega Graphics bits: 64 
           type: MCP L2 cache: 2048 KiB 
           Speed: 1420 MHz min/max: 1600/3500 MHz Core speeds (MHz): 1: 1420 2: 1420 3: 1422 
           4: 1534 
Graphics:  Device-1: AMD driver: amdgpu v: kernel 
           Display: x11 server: X.Org 1.19.2 driver: amdgpu,ati 
           unloaded: fbdev,modesetting,radeon,vesa resolution: 1280x1024~60Hz 
           OpenGL: renderer: AMD RAVEN (DRM 3.27.0 4.19.0-1-amd64 LLVM 7.0.0) v: 4.5 Mesa 18.2.6 
Audio:     Device-1: AMD driver: snd_hda_intel 
           Device-2: AMD driver: N/A 
           Device-3: AMD driver: snd_hda_intel 
           Sound Server: ALSA v: k4.19.0-1-amd64 
Network:   Device-1: Realtek driver: N/A 
           Device-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet driver: r8169 
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac: f4:39:09:49:94:f9 
Drives:    Local Storage: total: 1.03 TiB used: 5.41 GiB (0.5%) 
           ID-1: /dev/nvme0n1 vendor: Toshiba model: KBG30ZMV128G size: 119.24 GiB 
           ID-2: /dev/sda vendor: Toshiba model: DT01ACA100 size: 931.51 GiB 
Partition: ID-1: / size: 913.65 GiB used: 5.41 GiB (0.6%) fs: ext4 dev: /dev/sda2 
           ID-2: swap-1 size: 2.00 GiB used: 0 KiB (0.0%) fs: swap dev: /dev/sda3 
Sensors:   System Temperatures: cpu: 30.2 C mobo: N/A gpu: amdgpu temp: 30 C 
           Fan Speeds (RPM): N/A 
Info:      Processes: 211 Uptime: 42m Memory: 5.67 GiB used: 1012.0 MiB (17.4%) Shell: bash 
           inxi: 3.0.33 

Code: Select all

$ inxi -h
inxi supports the following options. You can combine these or list them one by one. For more 
detailed information, see man inxi. Examples: inxi -v4 -c6 OR inxi -bDc 6. If you start inxi with 
no arguments, it will display a short system summary. 

The following options, if used without -F, -b, or -v, will show option line(s): A, B, C, D, G, I, 
M, N, P, R, S, W, d, f, i, l, m, n, o, p, r, s, t, u, w, --slots, --usb - you can use these alone 
or together to show just the line(s) you want to see. If you use them with -v [level], -b or -F, 
inxi will combine the outputs. 
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 
Output Control Options:
 -a, --admin      Adds advanced sys admin data (only works with verbose or line output, not short 
                  form): 
                     -C  If available: CPU vulnerabilities (bugs); family, model-id, stepping - 
                         format: hex (decimal) if greater than 9, otherwise hex; microcode - 
                         format: hex. 
                     -d  If available: logical and physical block sizes.
                  -p,-P  If available: raw size of partition, percent available for user, block 
                         size of file system (root required); for swap, shows swapiness and vfs 
                         cache pressure, and if values are default or not. 
 -A, --audio      Audio/sound card(s), driver, sound server.
 -b, --basic      Basic output, short form. Same as inxi -v 2.
 -B, --battery    System battery info, including charge and condition, plus extra info (if 
                  battery present). 
 -c, --color      Set color scheme (0-42). For piped or redirected output, you must use an 
                  explicit color selector. Example: inxi -c 11 
                  Color selectors let you set the config file value for the selection (NOTE: IRC 
                  and global only show safe color set) 
                     94  Console, out of X
                     95  Terminal, running in X - like xTerm
                     96  Gui IRC, running in X - like Xchat, Quassel, Konversation etc.
                     97  Console IRC running in X - like irssi in xTerm
                     98  Console IRC not in X
                     99  Global - Overrides/removes all settings. Setting specific removes 
                         global. 
 -C, --cpu        CPU output, including per CPU clock speed and max CPU speed (if available).
 -d, --disk-full, --optical
                  Optical drive data (and floppy disks, if present). Triggers -D.
 -D, --disk       Hard Disk info, including total storage and details for each disk. Disk total 
                  used percentage includes swap partition size(s). 
 -f, --flags      All CPU flags. Triggers -C. Not shown with -F to avoid spamming.
 -F, --full       Full output. Includes all Upper Case line letters except -W, plus -s and -n. 
                  Does not show extra verbose options such as -d -f -i -l -m -o -p -r -t -u -x, 
                  unless specified. 
 -G, --graphics   Graphics info (card(s), driver, display protocol (if available), display 
                  server, resolution, renderer, OpenGL version). 
 -i, --ip         WAN IP address and local interfaces (requires ifconfig or ip network tool). 
                  Triggers -n. Not shown with -F for user security reasons. You shouldn't paste 
                  your local/WAN IP. 
 -I, --info       General info, including processes, uptime, memory, IRC client or shell type, 
                  inxi version. 
 -l, --label      Partition labels. Triggers -P. For full -p output, use -pl.
 -m, --memory     Memory (RAM) data. Requires root. Numbers of devices (slots) supported and 
                  individual memory devices (sticks of memory etc). For devices, shows device 
                  locator, size, speed, type (e.g. DDR3). If neither -I nor -tm are selected, 
                  also shows RAM used/total. 
 -M, --machine    Machine data. Device type (desktop, server, laptop, VM etc.), motherboard, BIOS 
                  and, if present, system builder (e.g. Lenovo). Shows UEFI/BIOS/UEFI [Legacy]. 
                  Older systems/kernels without the required /sys data can use dmidecode instead, 
                  run as root. Dmidecode can be forced with --dmidecode 
 -n, --network-advanced
                  Advanced Network card info. Triggers -N. Shows interface, speed, MAC id, state, 
                  etc. 
 -N, --network    Network card(s), driver.
 -o, --unmounted  Unmounted partition info (includes UUID and Label if available). Shows file 
                  system type if you have lsblk installed (Linux) or, for BSD/GNU Linux, if 
                  'file' installed and you are root or if you have added to /etc/sudoers (sudo v. 
                  1.7 or newer). 
                  Example:  <username> ALL = NOPASSWD: /usr/bin/file 
 -p, --partitions-full
                  Full partition information (-P plus all other detected partitions).
 -P, --partitions Basic partition info. Shows, if detected: / /boot /home /opt /tmp /usr 
                  /usr/home /var /var/log /var/tmp. Use -p to see all mounted partitions. 
 -r, --repos      Distro repository data. Supported repo types: APK, APT, CARDS, EOPKG, PACMAN, 
                  PACMAN-G2, PISI, PORTAGE, PORTS (BSDs), SLACKPKG, TCE, URPMQ, XBPS, YUM/ZYPP. 
 -R, --raid       RAID data. Shows RAID devices, states, levels, and components. md-raid: If 
                  device is resyncing, also shows resync progress line. 
 -s, --sensors    Sensors output (if sensors installed/configured): mobo/CPU/GPU temp; detected 
                  fan speeds. GPU temp only for Fglrx/Nvidia drivers. Nvidia shows screen number 
                  for > 1 screen. IPMI sensors if present. 
     --slots      PCI slots: type, speed, status. Requires root.
 -S, --system     System info: host name, kernel, desktop environment (if in X/Wayland), distro.
 -t, --processes  Processes. Requires extra options: c (CPU), m (memory), cm (CPU+memory). If 
                  followed by numbers 1-x, shows that number of processes for each type (default: 
                  5; if in IRC, max: 5). 
                  Make sure that there is no space between letters and numbers (e.g. -t cm10).
     --usb        Show USB data: Hubs and Devices.
 -u, --uuid       Partition UUIDs. Triggers -P. For full -p output, use -pu.
 -v, --verbosity  Set inxi verbosity level (0-8). Should not be used with -b or -F. Example: 
                  inxi -v 4 
                      0  Same as: inxi
                      1  Basic verbose, -S + basic CPU + -G + basic Disk + -I.
                      2  Networking card (-N), Machine (-M), Battery (-B; if present), and, if 
                         present, basic RAID (devices only; notes if inactive). Same as inxi -b 
                      3  Advanced CPU (-C), battery (-B), network (-n); triggers -x. 
                      4  Partition size/used data (-P) for (if present) /, /home, /var/, /boot. 
                         Shows full disk data (-D). 
                      5  Audio card (-A), sensors (-s), memory/RAM (-m), partition label (-l), 
                         UUID (-u), short form of optical drives, standard RAID data (-R). 
                      6  Full partition (-p), unmounted partition (-o), optical drive (-d), USB 
                         (--usb), full RAID; triggers -xx. 
                      7  Network IP data (-i); triggers -xxx.
                      8  Everything available, including repos (-r), processes (-tcm), PCI slots 
                         (--slots). 
 -w, --weather    Local weather data/time. To check an alternate location, see -W. NO AUTOMATED 
                  QUERIES ALLOWED! 
 -W, --weather-location
                  [location] Supported options for [location]: postal code[,country/country 
                  code]; city, state (USA)/country (country/two character country code); 
                  latitude, longitude. Only use if you want the weather somewhere other than the 
                  machine running inxi. Use only ASCII characters, replace spaces in 
                  city/state/country names with '+'. 
                  Example: inxi -W [new+york,ny london,gb madrid,es] 
     --weather-source
                  [1-9] Change weather data source. 1-4 generally active, 5-9 check. See man.
     --weather-unit
                  Set weather units to metric (m), imperial (i), metric/imperial (mi), or 
                  imperial/metric (im). 
 -x, --extra      Adds the following extra data (only works with verbose or line output, not 
                  short form): 
                     -A  Specific vendor/product information (if relevant); PCI Bus ID/USB ID 
                         number of card; Version/port(s)/driver version (if available). 
                     -B  Vendor/model, status (if available); attached devices (e.g. wireless 
                         mouse, keyboard, if present). 
                     -C  CPU flags (short list, use -f to see full list), Bogomips on CPU; CPU 
                         microarchitecture + revision (if found, or unless --admin, then shows as 
                         'stepping'). 
                     -d  Extra optical drive features data; adds rev version to optical drive.
                     -D  HDD temp with disk data if you have hddtemp installed, if you are root, 
                         or if you have added to /etc/sudoers (sudo v. 1.7 or newer). 
                         Example: <username> ALL = NOPASSWD: /usr/sbin/hddtemp 
                     -G  Specific vendor/product information (if relevant); PCI Bus ID/USB ID 
                         number of card; Direct rendering status (in X); Screen number GPU is 
                         running on (Nvidia only). 
                     -i  For IPv6, show additional scope addresses: Global, Site, Temporary, 
                         Unknown. See --limit for large counts of IP addresses. 
                     -I  Default system GCC. With -xx, also shows other installed GCC versions. 
                         If running in shell, not in IRC client, shows shell version number, if 
                         detected. Init/RC type and runlevel (if available). 
                     -m  Max memory module size (if available), device type.
                     -N  Specific vendor/product information (if relevant); PCI Bus ID/USB ID 
                         number of card; Version/port(s)/driver version (if available). 
                     -R  md-raid: second RAID Info line with extra data: blocks, chunk size, 
                         bitmap (if present). Resync line, shows blocks synced/total blocks. 
                         Hardware RAID driver version, bus ID. 
                     -s  Basic voltages (ipmi, lm-sensors if present): 12v, 5v, 3.3v, vbat.
                     -S  Kernel gcc version; system base of distro (if relevant and detected)
                     -t  Adds memory use output to CPU (-xt c), and CPU use to memory (-xt m).
                  --usb  For Device: driver.
                  -w -W  Wind speed and direction, humidity, pressure, and time zone, if 
                         available. 
-xx, --extra 2    Show extra, extra data (only works with verbose or line output, not short 
                  form): 
                     -A  Chip vendor:product ID for each audio device.
                     -B  Serial number, voltage now/minimum (if available).
                     -C  L1/L3 cache (if root and dmidecode installed).
                     -D  Disk transfer speed; NVMe lanes; Disk serial number.
                     -G  Chip vendor:product ID for each video card; OpenGL compatibility 
                         version, if free drivers and available; compositor (experimental); 
                         alternate Xorg drivers (if available). Alternate means driver is on 
                         automatic driver check list of Xorg for the card vendor, but is not 
                         installed on system. 
                     -I  Other detected installed gcc versions (if present). System default 
                         runlevel. Adds parent program (or tty) for shell info if not in IRC. 
                         Adds Init version number, RC (if found). 
                     -m  Manufacturer, part number; single/double bank (if found).
                     -M  Chassis info, BIOS ROM size (dmidecode only), if available.
                     -N  Chip vendor:product ID.
                     -R  md-raid: Superblock (if present), algorithm. If resync, shows progress 
                         bar. Hardware RAID Chip vendor:product ID. 
                     -s  DIMM/SOC voltages (ipmi only).
                     -S  Display manager (dm) in desktop output (e.g. kdm, gdm3, lightdm); active 
                         window manager if detected; desktop toolkit, if available 
                         (Xfce/KDE/Trinity only). 
                --slots  Slot length.
                  --usb  Vendor:chip ID.
                  -w -W  Snow, rain, precipitation, (last observed hour), cloud cover, wind 
                         chill, dew point, heat index, if available. 
-xxx, --extra 3   Show extra, extra, extra data (only works with verbose or line output, not 
                  short form): 
                     -A  Serial number.
                     -B  Chemistry, cycles, location (if available).
                     -C  CPU boost (turbo) enabled/disabled, if present.
                     -D  Firmware rev. if available; partition scheme, in some cases; disk 
                         rotation speed (if detected). 
                     -G  Compositor version (if detectable).
                     -I  For 'Shell:' adds ([su|sudo|login]) to shell name if present; for 
                         'running in:' adds (SSH) if SSH session. 
                     -m  Width of memory bus, data and total (if present and greater than data); 
                         Detail for Type, if present; module voltage, if available; serial 
                         number. 
                     -N  Serial number.
                     -R  zfs-raid: portion allocated (used) by RAID devices/arrays. md-raid: 
                         system md-raid support types (kernel support, read ahead, RAID events). 
                         Hardware RAID rev, ports, specific vendor/product information. 
                     -S  Panel/tray/bar/dock info in desktop output, if in X (like lxpanel, 
                         xfce4-panel, mate-panel); (if available) dm version number, window 
                         manager version number. 
                  --usb  For Device: serial number (if present), interface count; USB speed.
                  -w -W  Location (uses -z/irc filter), weather observation time, altitude, 
                         sunrise/sunset, if available. 
 -y, --width      Output line width max (integer >= 80). Overrides IRC/Terminal settings or 
                  actual widths. Example: inxi -y 130 
 -z, --filter     Adds security filters for IP/MAC addresses, serial numbers, location (-w), user 
                  home directory name. Default on for IRC clients. 
 -Z, --filter-override
                  Absolute override for output filters. Useful for debugging networking issues in 
                  IRC, for example. 
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 
Additional Options:
 -h, --help       This help menu.
     --recommends Checks inxi application dependencies + recommends, and directories, then shows 
                  what package(s) you need to install to add support for that feature. 
 -V, --version    Prints inxi version info then exits.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 
Advanced Options:
     --alt        Trigger for various advanced options:
                     40  Bypass Perl as a downloader option.
                     41  Bypass Curl as a downloader option.
                     42  Bypass Fetch as a downloader option.
                     43  Bypass Wget as a downloader option.
                     44  Bypass Curl, Fetch, and Wget as downloader options. Forces Perl if 
                         HTTP::Tiny present. 
     --display    [:[0-9]] Try to get display data out of X (default: display 0).
     --dmidecode  Force use of dmidecode data instead of /sys where relevant (e.g. -M, -B).
     --downloader Force inxi to use [curl|fetch|perl|wget] for downloads.
     --host       Turn on hostname for -S.
     --indent-min Set point where inxi autowraps line starters.
     --limit      [-1; 1-x] Set max output limit of IP addresses for -i (default 10; -1 removes 
                  limit). 
     --no-host    Turn off hostname for -S. Useful if showing output from servers etc.
     --no-ssl     Skip SSL certificate checks for all downloader actions (Wget/Fetch/Curl only).
     --output     [json|screen|xml] Change data output type. Requires --output-file if not 
                  screen. 
     --output-file
                  [Full filepath|print] Output file to be used for --output.
     --partition-sort
                  [dev-base|fs|id|label|percent-used|size|uuid|used] Change sort order of 
                  partition output. See man page for specifics. 
     --sleep      [0-x.x] Change CPU sleep time, in seconds, for -C (default: 0.35). Allows 
                  system to catch up and show a more accurate CPU use. 
                  Example: inxi -Cxxx --sleep 0.15 
     --tty        Forces irc flag to false. Generally useful if inxi is running inside of another 
                  tool like Chef or MOTD and returns corrupted color codes. Please see man page 
                  or file an issue if you need to use this flag. Must use -y [width] option if 
                  you want a specific output width. Always put this option first in an option 
                  list. 
     --usb-sys    Force USB data to use /sys as data source (Linux only).
     --usb-tool   Force USB data to use lsusb as data source (Linux only).
     --wan-ip-url [URL] Skips dig, uses supplied URL for WAN IP (-i). URL output must end in the 
                  IP address. See man. Example: inxi -i --wan-ip-url https://yoursite.com/ip.php 
     --wm         Force wm: to use wmctrl as data source. Default uses ps.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 
Debugging Options:
     --dbg        Specific debuggers, change often. Only 1 is constant:
                      1  Show downloader output. Turns off quiet mode.
     --debug      Triggers debugging modes.
                    1-3  On screen debugger output.
                     10  Basic logging.
                     11  Full file/system info logging.
                  The following create a tar.gz file of system data, plus inxi output. To 
                  automatically upload debugger data tar.gz file to ftp.techpatterns.com: 
                  inxi --debug 21 
                     20  Full system data collection: /sys; xorg conf and log data, xrandr, 
                         xprop, xdpyinfo, glxinfo etc.; data from dev, disks, partitions, etc. 
                     21  Upload debugger dataset to inxi debugger server automatically, removes 
                         debugger data directory, leaves tar.gz debugger file. 
                     22  Upload debugger dataset to inxi debugger server automatically, removes 
                         debugger data directory and debugger tar.gz file. 
     --debug-proc Force debugger parsing of /proc as sudo/root.
     --debug-proc-print
                  To locate file that /proc debugger hangs on.
     --debug-no-exit
                  Skip exit on error to allow completion.
     --debug-no-proc
                  Skip /proc debugging in case of a hang.
     --debug-no-sys
                  Skip /sys debugging in case of a hang.
     --debug-sys  Force PowerPC debugger parsing of /sys as sudo/root.
     --debug-sys-print
                  To locate file that /sys debugger hangs on.
     --ftp        Use with --debugger 21 to trigger an alternate FTP server for upload. 
                  Format: [ftp.xx.xx/yy]. Must include a remote directory to upload to. 
                  Example: inxi --debug 21 --ftp ftp.myserver.com/incoming 
Last edited by Nordhenne on Sun Aug 18, 2019 12:13 pm, edited 1 time in total.

User avatar
manyroads
Forum Regular
Forum Regular
Posts: 1860
Joined: Sat Jun 30, 2018 6:33 pm

Re: kein Sound trotz Soundkarte

#2

Post by manyroads » Sun Aug 18, 2019 9:22 am

Haben Sie schon die MX Tools (Select Sound) Funktion getestet (beim MX Tools Menü)?
Pax vobiscum,
Mark Rabideau - http://many-roads.com
bspwm MX-18.3 kernel: 5.1.11-antix.1-amd64-smp
"For every complex problem there is an answer that is clear, simple, and wrong." H. L. Mencken
Testing: antiX19

Nordhenne
Forum Novice
Forum  Novice
Posts: 8
Joined: Sun Aug 18, 2019 6:14 am

Re: kein Sound trotz Soundkarte

#3

Post by Nordhenne » Sun Aug 18, 2019 9:32 am

Ja, habe ich. Es existiert nur Generic: HDA-Intel - HD-Audio Generic bzw. Generic_1: HDA-Intel - HD-Audio Generic.
Ich habe beides ausprobiert. Leider ohne Wirkung.

User avatar
manyroads
Forum Regular
Forum Regular
Posts: 1860
Joined: Sat Jun 30, 2018 6:33 pm

Re: kein Sound trotz Soundkarte

#4

Post by manyroads » Sun Aug 18, 2019 9:40 am

Haben Sie betimmt pulseaudio dabei oder alsa (Installiert)?
Pax vobiscum,
Mark Rabideau - http://many-roads.com
bspwm MX-18.3 kernel: 5.1.11-antix.1-amd64-smp
"For every complex problem there is an answer that is clear, simple, and wrong." H. L. Mencken
Testing: antiX19

User avatar
manyroads
Forum Regular
Forum Regular
Posts: 1860
Joined: Sat Jun 30, 2018 6:33 pm

Re: kein Sound trotz Soundkarte

#5

Post by manyroads » Sun Aug 18, 2019 9:47 am

Haben Sie dies schon gesehen? viewtopic.php?t=48869
Pax vobiscum,
Mark Rabideau - http://many-roads.com
bspwm MX-18.3 kernel: 5.1.11-antix.1-amd64-smp
"For every complex problem there is an answer that is clear, simple, and wrong." H. L. Mencken
Testing: antiX19

Nordhenne
Forum Novice
Forum  Novice
Posts: 8
Joined: Sun Aug 18, 2019 6:14 am

Re: kein Sound trotz Soundkarte

#6

Post by Nordhenne » Sun Aug 18, 2019 11:23 am

pulseaudio und alsa sind beide installiert.
Ich habe ein Bild gemacht. Leider weiss ich nicht, wie ich das einfügen kann. Ich habe keine Cloud oder so.
Ich habe ein Beispielbild aus dem Ubuntuforum: klappt nicht.
Ich poste den Link:
https://askubuntu.com/questions/50067/h ... r-settings


Bei mir ist, genau wie auf dem Bild, kein Balken bei Headphone. Da ich keine Boxen habe (und nicht haben will), bräuchte ich das aber, oder?
Danke für den Link. Mein Englisch ist nicht sooo gut. ich werde mir das gleich in Ruhe durchlesen.

- So, ich hab das jetzt gelesen und war auch auf der Wiki discussion.

Meine Ausgabe für inxi -A:

Code: Select all

$ inxi -A
Audio:     Device-1: AMD driver: snd_hda_intel 
           Device-2: AMD driver: N/A 
           Device-3: AMD driver: snd_hda_intel 
           Sound Server: ALSA v: k4.19.0-1-amd64 
Aber der Befehl aus der Wiki, funktioniert bei mir nicht:

Code: Select all

$ Options snd-hda-intel model=k4.19.0-1-amd64
bash: Options: Kommando nicht gefunden.
Die Scripte einzufügen, traue ich mich nicht, da ich nicht genug Erfahrung habe, um zu merken, wenn etwas falsch läuft.
Ich hab Angst, mein System kaputt zu machen und neu installieren zu müssen.

User avatar
fehlix
Developer
Posts: 4862
Joined: Wed Apr 11, 2018 5:09 pm

Re: kein Sound trotz Soundkarte

#7

Post by fehlix » Sun Aug 18, 2019 12:01 pm

Was zeigt den der (Pulsaudio-)Lautstärkeregler (Tonmischer) unter dem Reiter Konfiguration an? Sind da alle Geräte aufgeführt?
Mit alsa solltest Du erst rumspielen, wenn beim Pulsaudio nichts ankommt.
Gigabyte Z77M-D3H, Intel Xeon E3-1240 V2 (Quad core), 32GB RAM,
GeForce GTX 770, Samsung SSD 850 EVO 500GB, Seagate Barracuda 4TB

Nordhenne
Forum Novice
Forum  Novice
Posts: 8
Joined: Sun Aug 18, 2019 6:14 am

Re: kein Sound trotz Soundkarte

#8

Post by Nordhenne » Sun Aug 18, 2019 12:07 pm

JA! Das war es! :number1:
Ich war zu blöd, um auf den Pfeil rechts zu klicken. ich hab immer nur Wiedergabe - Aufnahme- Ausgabegeräte gesehen.
Vielen, vielen Dank! Auch ein herzliches Dankeschön an manyroads, der so schnell und geduldig zu helfen versucht hat.
Ich wünsche euch allen einen wunderschönen Abend! :happy:

User avatar
fehlix
Developer
Posts: 4862
Joined: Wed Apr 11, 2018 5:09 pm

Re: kein Sound trotz Soundkarte

#9

Post by fehlix » Sun Aug 18, 2019 12:17 pm

Nordhenne wrote:
Sun Aug 18, 2019 12:07 pm
Ich war zu blöd, um auf den Pfeil rechts zu klicken.
Nö, bist Du nicht. Da sind schon einige andere drauf reingefallen.
:puppy:
Gigabyte Z77M-D3H, Intel Xeon E3-1240 V2 (Quad core), 32GB RAM,
GeForce GTX 770, Samsung SSD 850 EVO 500GB, Seagate Barracuda 4TB

Nordhenne
Forum Novice
Forum  Novice
Posts: 8
Joined: Sun Aug 18, 2019 6:14 am

Re: kein Sound trotz Soundkarte (solved)

#10

Post by Nordhenne » Mon Aug 19, 2019 3:53 pm

Nö, bist Du nicht. Da sind schon einige andere drauf reingefallen
Das ist tröstlich... :happy: Außerdem lernt man ja aus Fehlern. Insofern... passt schon.

Post Reply

Return to “Deutsches Forum”