Welcome!

The kernel problem with recent updates has been solved. Find the solution here

Important information
-- Required MX 15/16 Repository Changes
-- Information on torrent hosting changes
-- Information on MX15/16 GPG Keys
-- Spectre and Meltdown vulnerabilities

News
-- Introducing our new Website
-- MX Linux on social media: here

Current releases
-- MX-18.3 Point Release release info here
-- Migration Information to MX-18 here
-- antiX-17.4.1 release info here

New users
-- Please read this first, and don't forget to add system and hardware information to posts!
-- Here are the Forum Rules

MX 18: SD card and USB memory stick are not mounted

User avatar
gsm
Forum Novice
Forum  Novice
Posts: 60
Joined: Wed Dec 19, 2018 10:16 am

MX 18: SD card and USB memory stick are not mounted

#1

Post by gsm » Mon Dec 31, 2018 9:56 am

MX 18 on a HP mini 110 netbook SD will not mount a SD card or USB memory stick.

Exactly the same MX 18 system will mount both of these on a HP Pavilion dv9500.
The SD card is shown on the dv9500 as mmcblk0/mmcblk0p1 and the USB stick as sdc/sdc1.
I have tried this on both hardware also with a live MX 18 system, booted from the USB memory stick.

The latest Ubuntu 1810 mounts both SD card and USB stick automatically (live system).
Also i have tried Linux Peppermint live system, which mounts also automatically the two memory devices.
So this problem seems to be related to MX Linux 18 only, 32-bit and 64-bit.

On the HP mini 110 the USB stick is visible with GParted as /dev/sdc and /dev/sdc1, including the volume name, but cannot be mounted.

$ lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 111,8G 0 disk
├─sda1 8:1 0 34,5G 0 part /
├─sda2 8:2 0 28,4G 0 part /home
├─sda3 8:3 0 4G 0 part [SWAP]
└─sda4 8:4 0 44,9G 0 part
sdc 8:32 1 3,8G 0 disk
└─sdc1 8:33 1 3,8G 0 part

Any ideas, why the two devices cannot be mounted on a HP Mini 110 netbook?

User avatar
dolphin_oracle
Forum Veteran
Forum Veteran
Posts: 12144
Joined: Sun Dec 16, 2007 1:17 pm

Re: MX 18: SD card and USB memory stick are not mounted

#2

Post by dolphin_oracle » Mon Dec 31, 2018 10:08 am

does the USB not show up in the file manager then? Or is there some error message?
http://www.youtube.com/runwiththedolphin
lenovo ThinkPad T530 - MX-18.3
lenovo s21e - antiX-19 beta 2 (live-USB)
FYI: mx "test" repo is not the same thing as debian testing repo.

User avatar
gsm
Forum Novice
Forum  Novice
Posts: 60
Joined: Wed Dec 19, 2018 10:16 am

Re: MX 18: SD card and USB memory stick are not mounted

#3

Post by gsm » Mon Dec 31, 2018 11:17 am

In the file manager none of the two show up. No error message. The USB stick is flashing, obviously being accessed for a short time, after plugging in.
Last edited by gsm on Mon Dec 31, 2018 11:23 am, edited 1 time in total.

User avatar
Eadwine Rose
Forum Veteran
Forum Veteran
Posts: 8902
Joined: Wed Jul 12, 2006 2:10 am

Re: MX 18: SD card and USB memory stick are not mounted

#4

Post by Eadwine Rose » Mon Dec 31, 2018 11:20 am

Can you check /var/log/syslog? The last few lines should indicate something.

Also dmesg in the terminal can give some clues.
MX-18.3_x64 May 26 2019 * 4.19.0-5-amd64 ext4 Xfce 4.12.3 * 8-core AMD Ryzen 7 2700
Asus TUF B450-Plus Gaming UEFI * Asus GTX 1050 Ti Nvidia 390.116 * 2x16Gb DDR4 2666 Kingston HyperX Predator
Samsung 860EVO * Samsung S24D330 & P2250 * HP Envy5030

User avatar
gsm
Forum Novice
Forum  Novice
Posts: 60
Joined: Wed Dec 19, 2018 10:16 am

Re: MX 18: SD card and USB memory stick are not mounted

#5

Post by gsm » Mon Dec 31, 2018 11:37 am

I can't open /var/log/syslog.

dmesg:
[ 831.670691] systemd-logind[2507]: New session c1 of user lightdm.
[ 840.323635] systemd-logind[2507]: New session 3 of user gsm.
[ 958.151225] usb 1-3: new high-speed USB device number 5 using ehci-pci
[ 958.292074] usb 1-3: New USB device found, idVendor=13fe, idProduct=1e00, bcdDevice= 1.10
[ 958.292085] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 958.292092] usb 1-3: Product: Patriot Memory
[ 958.292099] usb 1-3: Manufacturer:
[ 958.292105] usb 1-3: SerialNumber: 078308B10B86
[ 958.293525] usb-storage 1-3:1.0: USB Mass Storage device detected
[ 958.296510] scsi host5: usb-storage 1-3:1.0
[ 959.333642] scsi 5:0:0:0: Direct-Access Patriot Memory PMAP PQ: 0 ANSI: 0 CCS
[ 959.336672] sd 5:0:0:0: Attached scsi generic sg2 type 0
[ 959.565895] sd 5:0:0:0: [sdc] 7831552 512-byte logical blocks: (4.01 GB/3.73 GiB)
[ 959.566769] sd 5:0:0:0: [sdc] Write Protect is off
[ 959.566776] sd 5:0:0:0: [sdc] Mode Sense: 23 00 00 00
[ 959.567690] sd 5:0:0:0: [sdc] No Caching mode page found
[ 959.567707] sd 5:0:0:0: [sdc] Assuming drive cache: write through
[ 959.615455] sdc: sdc1
[ 959.620288] sd 5:0:0:0: [sdc] Attached SCSI removable disk
gsm@mxhp110:~

User avatar
gsm
Forum Novice
Forum  Novice
Posts: 60
Joined: Wed Dec 19, 2018 10:16 am

Re: MX 18: SD card and USB memory stick are not mounted

#6

Post by gsm » Mon Dec 31, 2018 11:44 am

Cat as root, part of /var/log/syslog:

Dec 31 16:28:27 mxhp110 kernel: [ 958.151225] usb 1-3: new high-speed USB device number 5 using ehci-pci
Dec 31 16:28:27 mxhp110 kernel: [ 958.292074] usb 1-3: New USB device found, idVendor=13fe, idProduct=1e00, bcdDevice= 1.10
Dec 31 16:28:27 mxhp110 kernel: [ 958.292085] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Dec 31 16:28:27 mxhp110 kernel: [ 958.292092] usb 1-3: Product: Patriot Memory
Dec 31 16:28:27 mxhp110 kernel: [ 958.292099] usb 1-3: Manufacturer:
Dec 31 16:28:27 mxhp110 kernel: [ 958.292105] usb 1-3: SerialNumber: 078308B10B86
Dec 31 16:28:27 mxhp110 kernel: [ 958.293525] usb-storage 1-3:1.0: USB Mass Storage device detected
Dec 31 16:28:27 mxhp110 kernel: [ 958.296510] scsi host5: usb-storage 1-3:1.0
Dec 31 16:28:27 mxhp110 mtp-probe: checking bus 1, device 5: "/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-3"
Dec 31 16:28:27 mxhp110 mtp-probe: bus: 1, device: 5 was not an MTP device
Dec 31 16:28:28 mxhp110 kernel: [ 959.333642] scsi 5:0:0:0: Direct-Access Patriot Memory PMAP PQ: 0 ANSI: 0 CCS
Dec 31 16:28:28 mxhp110 kernel: [ 959.336672] sd 5:0:0:0: Attached scsi generic sg2 type 0
Dec 31 16:28:28 mxhp110 kernel: [ 959.565895] sd 5:0:0:0: [sdc] 7831552 512-byte logical blocks: (4.01 GB/3.73 GiB)
Dec 31 16:28:28 mxhp110 kernel: [ 959.566769] sd 5:0:0:0: [sdc] Write Protect is off
Dec 31 16:28:28 mxhp110 kernel: [ 959.566776] sd 5:0:0:0: [sdc] Mode Sense: 23 00 00 00
Dec 31 16:28:28 mxhp110 kernel: [ 959.567690] sd 5:0:0:0: [sdc] No Caching mode page found
Dec 31 16:28:28 mxhp110 kernel: [ 959.567707] sd 5:0:0:0: [sdc] Assuming drive cache: write through
Dec 31 16:28:28 mxhp110 kernel: [ 959.615455] sdc: sdc1
Dec 31 16:28:28 mxhp110 kernel: [ 959.620288] sd 5:0:0:0: [sdc] Attached SCSI removable disk
Dec 31 16:28:41 mxhp110 ntpd[2732]: 51.15.20.83 local addr 192.168.1.118 -> <null>
Dec 31 16:31:08 mxhp110 ntpd[2732]: 93.94.224.67 local addr 192.168.1.118 -> <null>

User avatar
gsm
Forum Novice
Forum  Novice
Posts: 60
Joined: Wed Dec 19, 2018 10:16 am

Re: MX 18: SD card and USB memory stick are not mounted

#7

Post by gsm » Mon Dec 31, 2018 1:19 pm

Hopefully this info from the same HP mini may help.

dmesg output peppermint, same hardware, after SD and then USB mount:
[ 52.578918] sd 4:0:0:0: [sdb] 1984000 512-byte logical blocks: (1.02 GB/969 MiB)
[ 52.582018] sdb: sdb1
[ 65.333320] perf: interrupt took too long (2530 > 2500), lowering kernel.perf_event_max_sample_rate to 79000
[ 73.178471] random: crng init done
[ 73.178477] random: 7 urandom warning(s) missed due to ratelimiting
[ 86.633479] perf: interrupt took too long (3191 > 3162), lowering kernel.perf_event_max_sample_rate to 62500
[ 497.748105] usb 1-3: new high-speed USB device number 4 using ehci-pci
[ 497.915991] usb 1-3: New USB device found, idVendor=13fe, idProduct=1e00
[ 497.916003] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 497.916093] usb 1-3: Product: Patriot Memory
[ 497.916109] usb 1-3: Manufacturer:
[ 497.916123] usb 1-3: SerialNumber: 078308B10B86
[ 498.032798] usb-storage 1-3:1.0: USB Mass Storage device detected
[ 498.043113] scsi host5: usb-storage 1-3:1.0
[ 498.044197] usbcore: registered new interface driver usb-storage
[ 498.092205] usbcore: registered new interface driver uas
[ 499.103756] scsi 5:0:0:0: Direct-Access Patriot Memory PMAP PQ: 0 ANSI: 0 CCS
[ 499.105382] sd 5:0:0:0: Attached scsi generic sg2 type 0
[ 499.335673] sd 5:0:0:0: [sdc] 7831552 512-byte logical blocks: (4.01 GB/3.73 GiB)
[ 499.336450] sd 5:0:0:0: [sdc] Write Protect is off
[ 499.336460] sd 5:0:0:0: [sdc] Mode Sense: 23 00 00 00
[ 499.337200] sd 5:0:0:0: [sdc] No Caching mode page found
[ 499.337215] sd 5:0:0:0: [sdc] Assuming drive cache: write through
[ 499.384720] sdc: sdc1
[ 499.388222] sd 5:0:0:0: [sdc] Attached SCSI removable disk

syslog peppermint, same hardware:
gsm@gsm-HP-Mini-110-3100 ~ $ sudo cat /var/log/syslog
[sudo] wachtwoord voor gsm:
Dec 31 18:03:07 gsm-HP-Mini-110-3100 rsyslogd: [origin software="rsyslogd" swVersion="8.16.0" x-pid="654" x-info="http://www.rsyslog.com"] rsyslogd was HUPed
Dec 31 18:03:07 gsm-HP-Mini-110-3100 systemd[1]: Reloading LSB: start Samba SMB/CIFS daemon (smbd).
Dec 31 18:03:07 gsm-HP-Mini-110-3100 smbd[4855]: * Reloading /etc/samba/smb.conf smbd
Dec 31 18:03:07 gsm-HP-Mini-110-3100 smbd[4855]: ...done.
Dec 31 18:03:07 gsm-HP-Mini-110-3100 systemd[1]: Reloaded LSB: start Samba SMB/CIFS daemon (smbd).
Dec 31 18:03:11 gsm-HP-Mini-110-3100 anacron[676]: Job `cron.daily' terminated
Dec 31 18:04:13 gsm-HP-Mini-110-3100 ntpd[1564]: kernel reports TIME_ERROR: 0x41: Clock Unsynchronized
Dec 31 18:05:58 gsm-HP-Mini-110-3100 kernel: [ 497.748105] usb 1-3: new high-speed USB device number 4 using ehci-pci
Dec 31 18:05:59 gsm-HP-Mini-110-3100 kernel: [ 497.915991] usb 1-3: New USB device found, idVendor=13fe, idProduct=1e00
Dec 31 18:05:59 gsm-HP-Mini-110-3100 kernel: [ 497.916003] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Dec 31 18:05:59 gsm-HP-Mini-110-3100 kernel: [ 497.916093] usb 1-3: Product: Patriot Memory
Dec 31 18:05:59 gsm-HP-Mini-110-3100 kernel: [ 497.916109] usb 1-3: Manufacturer:
Dec 31 18:05:59 gsm-HP-Mini-110-3100 kernel: [ 497.916123] usb 1-3: SerialNumber: 078308B10B86
Dec 31 18:05:59 gsm-HP-Mini-110-3100 mtp-probe: checking bus 1, device 4: "/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-3"
Dec 31 18:05:59 gsm-HP-Mini-110-3100 mtp-probe: bus: 1, device: 4 was not an MTP device
Dec 31 18:05:59 gsm-HP-Mini-110-3100 kernel: [ 498.032798] usb-storage 1-3:1.0: USB Mass Storage device detected
Dec 31 18:05:59 gsm-HP-Mini-110-3100 kernel: [ 498.043113] scsi host5: usb-storage 1-3:1.0
Dec 31 18:05:59 gsm-HP-Mini-110-3100 kernel: [ 498.044197] usbcore: registered new interface driver usb-storage
Dec 31 18:05:59 gsm-HP-Mini-110-3100 kernel: [ 498.092205] usbcore: registered new interface driver uas
Dec 31 18:06:00 gsm-HP-Mini-110-3100 kernel: [ 499.103756] scsi 5:0:0:0: Direct-Access Patriot Memory PMAP PQ: 0 ANSI: 0 CCS
Dec 31 18:06:00 gsm-HP-Mini-110-3100 kernel: [ 499.105382] sd 5:0:0:0: Attached scsi generic sg2 type 0
Dec 31 18:06:00 gsm-HP-Mini-110-3100 kernel: [ 499.335673] sd 5:0:0:0: [sdc] 7831552 512-byte logical blocks: (4.01 GB/3.73 GiB)
Dec 31 18:06:00 gsm-HP-Mini-110-3100 kernel: [ 499.336450] sd 5:0:0:0: [sdc] Write Protect is off
Dec 31 18:06:00 gsm-HP-Mini-110-3100 kernel: [ 499.336460] sd 5:0:0:0: [sdc] Mode Sense: 23 00 00 00
Dec 31 18:06:00 gsm-HP-Mini-110-3100 kernel: [ 499.337200] sd 5:0:0:0: [sdc] No Caching mode page found
Dec 31 18:06:00 gsm-HP-Mini-110-3100 kernel: [ 499.337215] sd 5:0:0:0: [sdc] Assuming drive cache: write through
Dec 31 18:06:00 gsm-HP-Mini-110-3100 kernel: [ 499.384720] sdc: sdc1
Dec 31 18:06:00 gsm-HP-Mini-110-3100 kernel: [ 499.388222] sd 5:0:0:0: [sdc] Attached SCSI removable disk
Dec 31 18:06:06 gsm-HP-Mini-110-3100 udisksd[1382]: Mounted /dev/sdc1 at /media/gsm/UBUNTU 18_1 on behalf of uid 1000
Dec 31 18:06:08 gsm-HP-Mini-110-3100 kernel: [ 507.435392] perf: interrupt took too long (4010 > 3988), lowering kernel.perf_event_max_sample_rate to 49750
Dec 31 18:07:31 gsm-HP-Mini-110-3100 dbus[677]: [system] Activating via systemd: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop.hostname1.service'
Dec 31 18:07:31 gsm-HP-Mini-110-3100 systemd[1]: Starting Hostname Service...
Dec 31 18:07:31 gsm-HP-Mini-110-3100 dbus[677]: [system] Successfully activated service 'org.freedesktop.hostname1'
Dec 31 18:07:31 gsm-HP-Mini-110-3100 systemd[1]: Started Hostname Service.
Dec 31 18:07:35 gsm-HP-Mini-110-3100 org.gtk.vfs.Daemon[977]: ** (gvfsd:993): WARNING **: dbus_mount_reply: Error from org.gtk.vfs.Mountable.mount(): Kon lijst van gedeelde mappen niet van server opvragen: Verbinding is geweigerd
Dec 31 18:07:35 gsm-HP-Mini-110-3100 org.gtk.vfs.Daemon[977]: ** (process:5291): WARNING **: Couldn't create directory monitor on smb://x-gnome-default-workgroup/. Error: De opgegeven locatie is niet aangekoppeld
Dec 31 18:07:35 gsm-HP-Mini-110-3100 org.gtk.vfs.Daemon[977]: ** (process:5291): WARNING **: Couldn't create directory monitor on smb://x-gnome-default-workgroup/. Error: De opgegeven locatie is niet aangekoppeld
Dec 31 18:07:35 gsm-HP-Mini-110-3100 ntpd[1564]: 91.189.91.157 local addr 192.168.1.118 -> <null>
Dec 31 18:07:38 gsm-HP-Mini-110-3100 org.gtk.vfs.Daemon[977]: ** (gvfsd:993): WARNING **: dbus_mount_reply: Error from org.gtk.vfs.Mountable.mount(): Kon lijst van gedeelde mappen niet van server opvragen: Verbinding is geweigerd
Dec 31 18:07:38 gsm-HP-Mini-110-3100 org.gtk.vfs.Daemon[977]: ** (process:5289): WARNING **: Couldn't create directory monitor on smb://x-gnome-default-workgroup/. Error: De opgegeven locatie is niet aangekoppeld
Dec 31 18:08:06 gsm-HP-Mini-110-3100 anacron[676]: Job `cron.weekly' started
Dec 31 18:08:06 gsm-HP-Mini-110-3100 anacron[5358]: Updated timestamp for job `cron.weekly' to 2018-12-31
Dec 31 18:08:09 gsm-HP-Mini-110-3100 ntpd[1564]: 51.15.10.155 local addr 192.168.1.118 -> <null>
Dec 31 18:08:38 gsm-HP-Mini-110-3100 kernel: [ 657.118291] perf: interrupt took too long (5023 > 5012), lowering kernel.perf_event_max_sample_rate to 39750
Dec 31 18:09:18 gsm-HP-Mini-110-3100 dbus[677]: [system] Activating via systemd: service name='org.bluez' unit='dbus-org.bluez.service'
Dec 31 18:10:02 gsm-HP-Mini-110-3100 kernel: [ 741.746338] perf: interrupt took too long (6304 > 6278), lowering kernel.perf_event_max_sample_rate to 31500
Dec 31 18:11:51 gsm-HP-Mini-110-3100 kernel: [ 850.599838] perf: interrupt took too long (7885 > 7880), lowering kernel.perf_event_max_sample_rate to 25250
Dec 31 18:12:43 gsm-HP-Mini-110-3100 systemd[1]: Starting Cleanup of Temporary Directories...
Dec 31 18:12:43 gsm-HP-Mini-110-3100 systemd-tmpfiles[5981]: [/usr/lib/tmpfiles.d/var.conf:14] Duplicate line for path "/var/log", ignoring.
Dec 31 18:12:43 gsm-HP-Mini-110-3100 systemd[1]: Started Cleanup of Temporary Directories.
Dec 31 18:12:58 gsm-HP-Mini-110-3100 dbus[677]: [system] Activating via systemd: service name='org.bluez' unit='dbus-org.bluez.service'

Until next year,
Happy new year in advance!

User avatar
gsm
Forum Novice
Forum  Novice
Posts: 60
Joined: Wed Dec 19, 2018 10:16 am

Re: MX 18: SD card and USB memory stick are not mounted

#8

Post by gsm » Tue Jan 01, 2019 2:39 pm

Happy new year to everyone!!
I did some more testing with the HP mini and found some new information.
Today the 2GB SD card appears as /dev/sdb (yesterday it was not detected at all), which is also visible using GParted.
The card is still not mounted and is not visible with Thunar.

$ sudo parted -ls
Model: ATA OCZ-VERTEX3 (scsi)
Disk /dev/sda: 120GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Disk Flags:

Number Start End Size Type File system Flags
1 1049kB 37,0GB 37,0GB primary ext4 boot
2 37,0GB 67,6GB 30,5GB primary ext4
4 67,6GB 116GB 48,2GB primary ext4
3 116GB 120GB 4295MB primary linux-swap(v1)

Model: Generic- xD/SD/M.S. (scsi)
Disk /dev/sdb: 1016MB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Disk Flags:

Number Start End Size Type File system Flags
1 116kB 1016MB 1016MB primary fat16 boot

gsm@mxhp110:~
$ sudo lsblk -o MODEL,NAME,FSTYPE,LABEL,MOUNTPOINT,SIZE
MODEL NAME FSTYPE LABEL MOUNTPOINT SIZE
OCZ-VERTEX3 sda 111,8G
├─sda1 ext4 rootMX17 / 34,5G
├─sda2 ext4 homeMX /home 28,4G
├─sda3 swap [SWAP] 4G
└─sda4 ext4 44,9G
xD/SD/M.S. sdb 968,8M
└─sdb1 vfat RICOHDCX 968,7M

User avatar
gsm
Forum Novice
Forum  Novice
Posts: 60
Joined: Wed Dec 19, 2018 10:16 am

Re: MX 18: SD card and USB memory stick are not mounted

#9

Post by gsm » Tue Jan 01, 2019 2:57 pm

Meanwhile i found a similar problem:
https://forum.mxlinux.org/viewtopic.php?t=45566

I will try now the following solution:
add usb-storage.delay_use=5 to grub
Then reboot and reinsert the SD-card after boot.

Result: No difference.
I also noticed that the MX linux system can't be shut down completely, or restarted, if the sd card is not removed first.

User avatar
gsm
Forum Novice
Forum  Novice
Posts: 60
Joined: Wed Dec 19, 2018 10:16 am

Re: MX 18: SD card and USB memory stick are not mounted

#10

Post by gsm » Wed Jan 02, 2019 4:22 pm

I have now also tested MX Linux 18 on a HP Pavilion PC m8000, model m8180.nl-a.
On this HP desktop the SD card and USB stick are detected immediately by Windows 10 1809, Manjaro and Deepin 15.8.
Unfortunately MX Linux 18 is the only system that does not recognize and/or automatically mount the SD card.
MX Linux 18 does however does mount the USB stick, after some retries.
For some reason MX Linux 18 only can do the trick, with both USB stick and SD Card, on the HP Pavilion dv9500 laptop.

Post Reply

Return to “Hardware /Configuration”