Welcome!
Important information
-- Spectre and Meltdown vulnerabilities
-- Change in MX sources

News
-- MX Linux on social media: here
-- Mepis support still here

Current releases
-- MX-17.1 Final release info here
-- antiX-17 release info here

New users
-- Please read this first, and don't forget to add system and hardware information to posts!
-- Here are the Forum Rules

MX-17.1: Safely connect a notebook's heaphone output to "tape in" - how?

Post Reply
Message
Author
User avatar
MX-16_fan
Forum Regular
Forum Regular
Posts: 957
Joined: Mon Feb 13, 2017 12:09 pm

MX-17.1: Safely connect a notebook's heaphone output to "tape in" - how?

#1 Post by MX-16_fan » Sun Sep 09, 2018 12:03 pm

I have a notebook here, which, as most do, only has a 3.5 mm headphone socket. It looks like this one: https://en.wikipedia.org/wiki/Phone_con ... _3.5mm.jpg. AFAIK those standard three-contact consumer plugs are also called "TRS connectors" (wherein "T" stands for "tip", ""R for "ring" and "S" for "sleeve").

Now I would love to connect the notebook's headphone socket to an old "PHILIPS SOUND PROJECT ZU7 66 RH 891 Stereodecoder" Hi-Fi set (looks like this one: http://www.busby.co.uk/public/images/sa ... 018/68.JPG). These old high-quality Hi-Fi sets are frequently being thrown away or sold for a few dollars, probably because people don't know how to connect their modern devices to them.

The only way of getting external audio into this machine is an old socket labelled "TAPE". You can see it on the left side of this: https://www.radiomuseum.org/images/radi ... 672903.jpg foto. I have identified this as being a 5/180° DIN connector socket (see https://en.wikipedia.org/wiki/DIN_conne ... alog_audio).


Marginal note I: I'm not quite sure why the socket is for five pins. Maybe the Hi-Fi set features both "tape in" and "tape out". I wouldn't know what the fifth pin is any good for, however. https://en.wikipedia.org/wiki/DIN_conne ... alog_audio mentions "Screen/return" as a function for pin #2. I have no idea what this is supposed to be.

Marginal note II: As far as the connection cable quality is concerned, I've heard that it's important to use a "balanced audio" quality whenever possible.


Anyway, my main question is: How can I safely connect the notebook's headphone socket to the Hi-Fi set's "TAPE" socket?

AFAIK "headphone outputs" provide a lot more power than expected by any "tape in", and the impedance is be wrong. (I'm assuming that "tape in" is the same as "line in". Please correct me if I'm wrong.) To my knowledge, these old machines don't like receiving too much power and the wrong impedance and have a tendency to get broken if they do.

My impression is that there might only be two ways of achieving the adjustment needed:
  1. Use something similar to the Automatic volume limiter system (AVLS) that can be found in some headphones. Seems that in the professional audio world there are systems called "Direct Input units" ("DI units", cf. https://en.wikipedia.org/wiki/DI_unit) that might do the job. Don't know if that is exactly what would be needed - does anyone know? An example for a DI unit is the "ZDirect Professional Passive Direct Box" by U.S. company ART (http://www.artproaudio.com/product/zdir ... irect-box/).
  2. Let the operating system (MX-17.1) tell the notebook's sound D/A converter never to exceed a certain amperage, and/or voltage, and never to go below a certain impedance. Don't know if MX-17.1 can talk directly to the D/A converter in order to achieve that.

Any input on this topic will be greatly appreciated.


Greetings, Joe

User avatar
timkb4cq
Forum Veteran
Forum Veteran
Posts: 4414
Joined: Wed Jul 12, 2006 4:05 pm

Re: MX-17.1: Safely connect a notebook's heaphone output to "tape in" - how?

#2 Post by timkb4cq » Sun Sep 09, 2018 5:06 pm

You use pavucontrol or alsamixer to configure the jack to be Line Out and connect with one of these cables.
https://www.amazon.com/Kenable-3-5mm-St ... B0053O6CSW

The line out setting for sound cards is designed for that purpose and I use the line-out in a micro-itx computer to drive my stereo system (though mine uses rca inputs instead of DIN so the cable is different). I run mpd on that machine so all my music is available from any of the devices on my network.
MSI 970A-G43 MB, AMD FX-6300 (six core), 16GB RAM, GeForce 730, Samsung 850 EVO 250GB SSD, Seagate Barracuda XT 3TB

User avatar
MX-16_fan
Forum Regular
Forum Regular
Posts: 957
Joined: Mon Feb 13, 2017 12:09 pm

Re: MX-17.1: Safely connect a notebook's heaphone output to "tape in" - how?

#3 Post by MX-16_fan » Sun Sep 09, 2018 5:44 pm

@timkb4cq:
timkb4cq wrote:
Sun Sep 09, 2018 5:06 pm
You use pavucontrol ... to configure the jack to be Line Out (...).
How would I do that? I can see no such option (MX-17.1, pavucontrol 3.0-3.1).


Greetings, Joe

User avatar
timkb4cq
Forum Veteran
Forum Veteran
Posts: 4414
Joined: Wed Jul 12, 2006 4:05 pm

Re: MX-17.1: Safely connect a notebook's heaphone output to "tape in" - how?

#4 Post by timkb4cq » Sun Sep 09, 2018 7:25 pm

Screenshot-17.png
Well, here is where I meant - and I remember this working on my old (now dead) Lenovo.
But my HP laptop, the line-out jack is only available on the docking station (which I don't have). So it's not as simple as I thought.

If you install alsa-tools-gui there is a utility hdajackretask to remap the jacks so your headphone jack or microphone jack could be the line-out instead.
This doesn't work on all hardware (and it fails to connect Line Out to either on my Probook 6475b) but it does work for others so it's worth a shot.

In any case, the headphone output is very unlikely to damage an old amp. Line Out may run at about 0.3V rms - but those old amps were designed to work when an old crystal cartridge turntable was plugged in and they ran around 2.5V. You laptop will likely output between 0.5V & 2V.

In any case, 3.5mm jack attenuating cables are readily available if you're worried about it.
You do not have the required permissions to view the files attached to this post.
MSI 970A-G43 MB, AMD FX-6300 (six core), 16GB RAM, GeForce 730, Samsung 850 EVO 250GB SSD, Seagate Barracuda XT 3TB

User avatar
MX-16_fan
Forum Regular
Forum Regular
Posts: 957
Joined: Mon Feb 13, 2017 12:09 pm

Re: MX-17.1: Safely connect a notebook's heaphone output to "tape in" - how?

#5 Post by MX-16_fan » Mon Sep 10, 2018 7:29 am

@timkb4cq:
timkb4cq wrote:
Sun Sep 09, 2018 7:25 pm
Screenshot-17.png
Well, here is where I meant - and I remember this working on my old (now dead) Lenovo.
But my HP laptop, the line-out jack is only available on the docking station (which I don't have). So it's not as simple as I thought.
(...)
Maybe the pavucontrol way of remapping the audio sockets requires that you have one of those modern combo sockets that can function as headphones-out as well as line-out as well as microphone-in jacks?
timkb4cq wrote:
Sun Sep 09, 2018 7:25 pm
If you install alsa-tools-gui there is a utility hdajackretask to remap the jacks so your headphone jack or microphone jack could be the line-out instead. (...)
Interesting tool, thanks. Is it any dangerous to use it - could this possibly destroy the D/A hardware?

In any case, it doesn't seem to detect the notebook correctly: Claims that I have
Green Headphone, Rear Side
Pink Mic, Rear Side
Blue Line In, Rear Side
Neither do I have any color-coded sockets, nor do I have any on the rear side.
timkb4cq wrote:
Sun Sep 09, 2018 7:25 pm
In any case, the headphone output is very unlikely to damage an old amp. Line Out may run at about 0.3V rms - but those old amps were designed to work when an old crystal cartridge turntable was plugged in and they ran around 2.5V. You laptop will likely output between 0.5V & 2V.
I have indeed more than one time seen a similar old stereo getting damaged by having been connected directly from notebook-headphones-out to line-in. I guess what you say is correct for a classic (stand-alone) amplifier, as they probably are more tolerant than those combo Hi-Fi sets, but please consider that the Hi-Fi set in question already has a turntable built-in, so it might not expect getting high power via the "TAPE"-in.
timkb4cq wrote:
Sun Sep 09, 2018 7:25 pm
In any case, 3.5mm jack attenuating cables are readily available if you're worried about it.
Good idea. Couldn't really find any that wouldn't have a TRRS type of audio plug, however. What would be needed would be TRS.

What do you think about the above-mentioned "ZDirectProfessional Passive Direct Box" (http://www.artproaudio.com/product/zdir ... irect-box/)?


Greetings, and have a nice week, Joe

Post Reply

Return to “Hardware /Configuration”