Code: Select all
$ inxi -F
System: Host: mx16-laptop Kernel: 4.9.0-1.1-liquorix-amd64 x86_64 (64 bit) Desktop: Xfce 4.12.2
Distro: MX-16_x64 Metamorphosis 12 December 2016
Machine: Device: laptop System: GIGABYTE product: P15FV5
Mobo: GIGABYTE model: P15FV5 UEFI: American Megatrends v: 1.05.09RGI1 date: 12/03/2015
Battery BAT0: charge: 42.2 Wh 100.0% condition: 42.2/44.0 Wh (96%)
CPU: Quad core Intel Core i7-6700HQ (-HT-MCP-) cache: 6144 KB
clock speeds: max: 2601 MHz 1: 1400 MHz 2: 2000 MHz 3: 800 MHz 4: 800 MHz 5: 800 MHz
6: 800 MHz 7: 900 MHz 8: 900 MHz
Graphics: Card-1: Intel Device 191b
Card-2: NVIDIA Device 139a
Display Server: X.Org 1.16.4 drivers: modesetting,nouveau,intel (unloaded: fbdev,vesa)
Resolution: 1920x1080@60.02hz
GLX Renderer: Mesa DRI Intel HD Graphics 530 (Skylake GT2) GLX Version: 3.0 Mesa 12.0.3
Audio: Card Intel Device a170 driver: snd_hda_intel Sound: ALSA v: k4.9.0-1.1-liquorix-amd64
Network: Card-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller driver: r8169
IF: eth0 state: down mac: 80:fa:5b:30:92:9e
Card-2: Realtek RTL8723BE PCIe Wireless Network Adapter driver: rtl8723be
IF: wlan0 state: up mac: 30:52:cb:e2:78:c8
Drives: HDD Total Size: 1128.2GB (3.2% used)
ID-1: /dev/sdb model: WDC_WD10JPVX size: 1000.2GB
ID-2: /dev/sda model: TS128GMTS800 size: 128.0GB
Partition: ID-1: / size: 15G used: 5.9G (43%) fs: ext4 dev: /dev/sda2
ID-2: /home size: 25G used: 16G (66%) fs: ext4 dev: /dev/sdb1
Sensors: System Temperatures: cpu: 40.0C mobo: N/A gpu: N/A
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 264 Uptime: 44 min Memory: 621.1/15937.0MB Client: Shell (bash) inxi: 2.3.8
Code: Select all
2017-05-12 11:46:05 install python-gps amd64 <none> 3.11-3
2017-05-12 11:46:05 install gpsd-clients amd64 <none> 3.11-3
2017-05-12 10:48:28 install libgps21 amd64 <none> 3.11-3
2017-05-12 10:48:28 install gpsd amd64 <none> 3.11-3
stty -F /dev/ttyUSB1 ispeed 4800 && cat </dev/ttyUSB1
I have output from the gps and it keeps going till I close the terminal. If I try to start gpsd -D 5 -N -n /dev/ttyUSB1 I get this:
Code: Select all
$ gpsd -D 5 -N -n /dev/ttyUSB1
gpsd:INFO: launching (Version 3.11)
gpsd:IO: opening IPv4 socket
gpsd:ERROR: can't bind to IPv4 port gpsd, Address already in use
gpsd:ERROR: maybe gpsd is already running!
gpsd:IO: opening IPv6 socket
gpsd:ERROR: can't bind to IPv6 port gpsd, Address already in use
gpsd:ERROR: maybe gpsd is already running!
gpsd:INFO: command sockets creation failed, netlib errors -1, -1