ksnip 1.6 from test repo does not run [SOLVED]

[penguin]

ksnip 1.6 from test repo does not run.
running in terminal shows the follow error.

Code: Select all

ksnip: error while loading shared libraries: libkImageAnnotator.so.0.1.0: cannot open shared object file: No such file or directory

[mmikeinsantarosa]

ksnip 1.6 from test repo does not run.when run in terminal shows the follow error.

Code: Select all

ksnip: error while loading shared libraries: libkImageAnnotator.so.0.1.0: cannot open shared object file: No such file or directory

Anybody else seeing this?
I just installed using mxpi in a clean vm and it installed and runs AOK here (at work).

[chrispop99]

It runs fine here on a mature install.

Chris

[timkb4cq]

libkimageannotator is a listed dependency of ksnip 1.6 so it should have been installed when you installed ksnip.
If you used the MX Package Installer to install ksnip, please post the contents of /var/log/mxpi.log so we can see what happened there.

If you did not use mxpi, let us know how you did install ksnip from Test.

[penguin]

As I remember I had ksnip before but a version 1.5 ( a deb found and installed from net because MX still has version 1.4 in Stable repo). Anyway. I updated to ksnip to version 1.6 from test repo and ksnip does not run > error from terminal mentioned above in my previous post. I removed this version and installed ksnip version 1.4 from stable which runs fine. Just as for another test, I re upgraded from to version 1.6 but still no luck. Version 1.6 does not run.
libkimageannotator version 0.0.2-1 is installed in my system.

Code: Select all

--2019-06-10 20:12:13--  http://mxrepo.com/mx/testrepo/dists/stretch/test/binary-amd64/Packages.gz
Resolving mxrepo.com (mxrepo.com)... 70.40.214.183
Connecting to mxrepo.com (mxrepo.com)|70.40.214.183|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 944513 (922K) [application/x-gzip]
Saving to: ‘mxPackages.gz’

     0K .......... .......... .......... .......... ..........  5%  115K 8s
    50K .......... .......... .......... .......... .......... 10%  267K 5s
   100K .......... .......... .......... .......... .......... 16%  714K 4s
   150K .......... .......... .......... .......... .......... 21% 1.76M 3s
   200K .......... .......... .......... .......... .......... 27%  283K 2s
   250K .......... .......... .......... .......... .......... 32%  794K 2s
   300K .......... .......... .......... .......... .......... 37% 1.07M 2s
   350K .......... .......... .......... .......... .......... 43%  421K 1s
   400K .......... .......... .......... .......... .......... 48%  542K 1s
   450K .......... .......... .......... .......... .......... 54% 1015K 1s
   500K .......... .......... .......... .......... .......... 59%  556K 1s
   550K .......... .......... .......... .......... .......... 65%  520K 1s
   600K .......... .......... .......... .......... .......... 70%  785K 1s
   650K .......... .......... .......... .......... .......... 75%  812K 1s
   700K .......... .......... .......... .......... .......... 81%  302K 0s
   750K .......... .......... .......... .......... .......... 86% 1.88M 0s
   800K .......... .......... .......... .......... .......... 92% 1.50M 0s
   850K .......... .......... .......... .......... .......... 97%  346K 0s
   900K .......... .......... ..                              100%  551K=2.0s

2019-06-10 20:12:15 (464 KB/s) - ‘mxPackages.gz’ saved [944513/944513]

Hit:1 http://it.mxrepo.com/antix/stretch stretch InRelease
Hit:2 http://it.mxrepo.com/mx/repo stretch InRelease
Get:3 http://it.mxrepo.com/mx/testrepo stretch InRelease [4,979 B]
Hit:4 http://security.debian.org stretch/updates InRelease
Hit:5 https://deb.opera.com/opera-stable stable InRelease
Hit:6 https://repo.skype.com/deb stable InRelease
Hit:7 https://download.mono-project.com/repo/debian stable-stretch InRelease
Get:8 http://it.mxrepo.com/mx/testrepo stretch/test amd64 Packages [945 kB]
Hit:9 http://ftp.bg.debian.org/debian stretch-updates InRelease
Ign:10 http://ftp.bg.debian.org/debian stretch InRelease
Hit:11 http://ftp.bg.debian.org/debian stretch Release
Get:13 http://it.mxrepo.com/mx/testrepo stretch/test i386 Packages [939 kB]
Fetched 1,889 kB in 3s (624 kB/s)
Reading package lists...
sources updated OK
Reading package lists...
Building dependency tree...
Reading state information...
The following packages were automatically installed and are no longer required:
  libmuparser2v5 qml-module-qtgraphicaleffects qml-module-qtquick-controls
  qml-module-qtquick-layouts qml-module-qtquick-window2
Use 'apt autoremove' to remove them.
The following packages will be upgraded:
  ksnip
1 upgraded, 0 newly installed, 0 to remove and 171 not upgraded.
Need to get 0 B/156 kB of archives.
After this operation, 176 kB of additional disk space will be used.
(Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 478472 files and directories currently installed.)
Preparing to unpack .../ksnip_1.6.0-1mx17+1_amd64.deb ...
Unpacking ksnip (1.6.0-1mx17+1) over (1.4.0-1mx17+1) ...
Processing triggers for mime-support (3.60) ...
Processing triggers for desktop-file-utils (0.23-1) ...
Processing triggers for bamfdaemon (0.5.3-2) ...
Rebuilding /usr/share/applications/bamf-2.index...
Setting up ksnip (1.6.0-1mx17+1) ...
Processing triggers for gnome-menus (3.13.3-9) ...
Hit:1 http://security.debian.org stretch/updates InRelease
Hit:2 http://it.mxrepo.com/antix/stretch stretch InRelease
Hit:3 http://ftp.bg.debian.org/debian stretch-updates InRelease
Hit:4 http://it.mxrepo.com/mx/repo stretch InRelease
Hit:5 https://repo.skype.com/deb stable InRelease
Ign:6 http://ftp.bg.debian.org/debian stretch InRelease
Hit:7 https://deb.opera.com/opera-stable stable InRelease
Hit:8 https://download.mono-project.com/repo/debian stable-stretch InRelease
Hit:9 http://ftp.bg.debian.org/debian stretch Release
Reading package lists...
sources updated OK

[penguin]

It runs fine here on a mature install.

Chris

Sorry Chris, because I am not native speaker. What means mature install ?

Investigating in Synaptic for kImageAnnotator > said....

Code: Select all

kImageAnnotator depends on kColorPicker which needs to
be installed before building kImageAnnotator.

Has any connection with this ? I have no kColorPicker installed in my MX.

[mmikeinsantarosa]

penguin,
Somehow you got the primary package without also getting its colorpicker and annotator dependencies. Could you try installing again from mx package installer after selecting the test repo tab?

See if that picks up the missing parts.

- mike

[timkb4cq]

libkimageannotator version 0.0.2-1 is installed in my system.

Aha!
Because the libkimageannotator dependency in ksnip_1.6 was not versioned, the older library version was not upgraded.
If you go back to the Test repo in mxpi, uncheck the Hide library & development packages box & upgrade libkimageannotator then ksnip_1.6 will work.

And we'll need to version that dependency so it doesn't happen again.

[penguin]

libkimageannotator version 0.0.2-1 is installed in my system.

Aha!
Because the libkimageannotator dependency in ksnip_1.6 was not versioned, the older library version was not upgraded.
If you go back to the Test repo in mxpi, uncheck the Hide library & development packages box & upgrade libkimageannotator then ksnip_1.6 will work.

And we'll need to version that dependency so it doesn't happen again.

Yep ! Done !
Can developer include automatically upgrading of libkimageannotator within install package of ksnip 1.6 ? So others will not have the same problem ?

[Stevo]

Yes, since the build process did not automatically add the dependency for the newer library version, the packager can manually add it to the "Depends:" field in debian/control, then rebuild. They can update the "Qt 4.8" part in the description, too, that's another minor bug.
l

Ksnip is a Qt 4.8 based Linux screenshot tool inspired by the
Windows Snipping Tool.