[Solved] InkPad3 external partition doesn`t mount automatically
Posted: Thu Jul 05, 2018 7:07 am
I ve got InkPad3 Pocket Book eReader. Whenever I connect eReader via USB cable, the partition isn`t mounted automatically.
Dmesg shows:
[ 7191.994045] usb 6-6: New USB device found, idVendor=18d1, idProduct=0001
[ 7191.994054] usb 6-6: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[ 7191.994059] usb 6-6: Product: PocketBook740
[ 7191.994064] usb 6-6: Manufacturer: Obreey
[ 7191.994070] usb 6-6: SerialNumber: 20080411
[ 7192.784058] usb 3-1: new low-speed USB device number 18 using uhci_hcd
[ 7192.805973] usb-storage 6-6:1.0: USB Mass Storage device detected
[ 7192.806746] scsi host5: usb-storage 6-6:1.0
[ 7192.806885] usbcore: registered new interface driver usb-storage
[ 7192.817073] usbcore: registered new interface driver uas
[ 7193.824197] scsi 5:0:0:0: Direct-Access Linux File-CD Gadget 0310 PQ: 0 ANSI: 2
[ 7193.824910] scsi 5:0:0:1: Direct-Access Linux File-CD Gadget 0310 PQ: 0 ANSI: 2
[ 7193.826143] sd 5:0:0:0: Attached scsi generic sg1 type 0
[ 7193.826738] sd 5:0:0:1: Attached scsi generic sg2 type 0
[ 7193.828486] sd 5:0:0:0: Power-on or device reset occurred
[ 7193.829266] sd 5:0:0:1: Power-on or device reset occurred
[ 7193.833747] sd 5:0:0:0: [sdb] Attached SCSI removable disk
[ 7193.834354] sd 5:0:0:1: [sdc] Attached SCSI removable disk
So I have to always mount manually by typing command:
sudo mount /dev/sdb /mnt
I have checked the issue on Linux Mint distribution, and InkPad3 USB partition is mounted automatically, as on every other USB stick
1. Why MX-17 doesnt mount automatically that InkPad3 eReader partition, while properly mounting any other external USB partitions?
2. How to manually mount external partition as a non-administrative user?
Thanks for help,
MX-17
Dmesg shows:
[ 7191.994045] usb 6-6: New USB device found, idVendor=18d1, idProduct=0001
[ 7191.994054] usb 6-6: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[ 7191.994059] usb 6-6: Product: PocketBook740
[ 7191.994064] usb 6-6: Manufacturer: Obreey
[ 7191.994070] usb 6-6: SerialNumber: 20080411
[ 7192.784058] usb 3-1: new low-speed USB device number 18 using uhci_hcd
[ 7192.805973] usb-storage 6-6:1.0: USB Mass Storage device detected
[ 7192.806746] scsi host5: usb-storage 6-6:1.0
[ 7192.806885] usbcore: registered new interface driver usb-storage
[ 7192.817073] usbcore: registered new interface driver uas
[ 7193.824197] scsi 5:0:0:0: Direct-Access Linux File-CD Gadget 0310 PQ: 0 ANSI: 2
[ 7193.824910] scsi 5:0:0:1: Direct-Access Linux File-CD Gadget 0310 PQ: 0 ANSI: 2
[ 7193.826143] sd 5:0:0:0: Attached scsi generic sg1 type 0
[ 7193.826738] sd 5:0:0:1: Attached scsi generic sg2 type 0
[ 7193.828486] sd 5:0:0:0: Power-on or device reset occurred
[ 7193.829266] sd 5:0:0:1: Power-on or device reset occurred
[ 7193.833747] sd 5:0:0:0: [sdb] Attached SCSI removable disk
[ 7193.834354] sd 5:0:0:1: [sdc] Attached SCSI removable disk
So I have to always mount manually by typing command:
sudo mount /dev/sdb /mnt
I have checked the issue on Linux Mint distribution, and InkPad3 USB partition is mounted automatically, as on every other USB stick
1. Why MX-17 doesnt mount automatically that InkPad3 eReader partition, while properly mounting any other external USB partitions?
2. How to manually mount external partition as a non-administrative user?
Thanks for help,
MX-17