Help installing to Mac 2007
- Yellowhoney
- Posts: 53
- Joined: Sat Apr 20, 2019 5:36 am
Help installing to Mac 2007
I have read through a few posts but I can't get my head around how to install MX 18.3 to a 2007 Imac 2007
I got my hands on a free iMac 2007, the HDD was removed, I brought and installed a new SSD ( i don't have any MAC os CD or USB stick to run mac os )
so I've been googling and found out these macs only have 32 bit EFI , some post have talked about rEFIed or rEFInd ,
I've tried using these IOS but didn't work https://mattgadient.com/2016/07/11/linu ... ment-52803
Do I need to have EXT4 or install anything else?
I don't have a clue how to get it running images/icons/smile/redface.gif
Could someone walk me through the steps?
What i have done:
Created Live USB manage to run and install
after a reboot, it only shows a gray folder with a question mark .
I got my hands on a free iMac 2007, the HDD was removed, I brought and installed a new SSD ( i don't have any MAC os CD or USB stick to run mac os )
so I've been googling and found out these macs only have 32 bit EFI , some post have talked about rEFIed or rEFInd ,
I've tried using these IOS but didn't work https://mattgadient.com/2016/07/11/linu ... ment-52803
Do I need to have EXT4 or install anything else?
I don't have a clue how to get it running images/icons/smile/redface.gif
Could someone walk me through the steps?
What i have done:
Created Live USB manage to run and install
after a reboot, it only shows a gray folder with a question mark .
2007 20* Imac running 3gb MX18.3
i5 4670k 16gb ram
i5 4670k 16gb ram
Re: Help installing to Mac 2007
So you could boot with the MX 18.3 x64 Live iso from the Live USB. OK.
Could you also tell us how exactly you created the LiveUSB from
the MX 18.3 x64 iso.
Suggest we start here:
Reboot again with the LiveUSB, and do post "Quick System Info" from the running system.
.. and we go from there ...
Gigabyte Z77M-D3H, Intel Xeon E3-1240 V2 (Quad core), 32GB RAM,
GeForce GTX 770, Samsung SSD 850 EVO 500GB, Seagate Barracuda 4TB
GeForce GTX 770, Samsung SSD 850 EVO 500GB, Seagate Barracuda 4TB
- Yellowhoney
- Posts: 53
- Joined: Sat Apr 20, 2019 5:36 am
Re: Help installing to Mac 2007
download main .iso and tried 2nd way with https://mattgadient.com/2018/02/12/redu ... t-efi-macs, rufus ( windows ) > to USB i I didn't do the step you mention with the toolfehlix wrote: ↑Tue Jun 11, 2019 6:13 amSo you could boot with the MX 18.3 x64 Live iso from the Live USB. OK.
Could you also tell us how exactly you created the LiveUSB from
the MX 18.3 x64 iso.
Suggest we start here:
Reboot again with the LiveUSB, and do post "Quick System Info" from the running system.
.. and we go from there ...
but after the install
starting from scratch what IOS should i be downloading from ?
Last edited by Yellowhoney on Tue Jun 11, 2019 7:11 am, edited 1 time in total.
2007 20* Imac running 3gb MX18.3
i5 4670k 16gb ram
i5 4670k 16gb ram
Re: Help installing to Mac 2007
For those of us unfamiliar with Macs, what's an IOS?
Please read the Forum Rules, How To Ask For Help, How to Break Your System and Don't Break Debian. Always include your full Quick System Info (QSI) with each and every new help request.
- Yellowhoney
- Posts: 53
- Joined: Sat Apr 20, 2019 5:36 am
Re: Help installing to Mac 2007
Ive pull 1 stick of ram out , because i thought it might be faulty ( it take a long time to load EFI ) ( 7-10 min)
but now i think it because it USB1 right ?
[/code]
but now i think it because it USB1 right ?
Code: Select all
[code]
System: Host: mx1 Kernel: 4.19.0-5-amd64 x86_64 bits: 64 compiler: gcc v: 6.3.0
Desktop: Xfce 4.12.3 Distro: MX-18.3_x64 Continuum May 26 2019
base: Debian GNU/Linux 9 (stretch)
Machine: Type: Desktop System: Apple product: iMac7,1 v: 1.0 serial: <filter>
Mobo: Apple model: Mac-F4238CC8 v: PVT serial: <filter> UEFI: Apple
v: IM71.88Z.007A.B01.0707251237 date: 07/25/07
CPU: Topology: Dual Core model: Intel Core2 Duo T7300 bits: 64 type: MCP arch: Core Merom
rev: B L2 cache: 4096 KiB
flags: lm nx pae sse sse2 sse3 ssse3 vmx bogomips: 7980
Speed: 1790 MHz min/max: 800/2000 MHz Core speeds (MHz): 1: 1197 2: 1197
Graphics: Device-1: AMD RV610/M74 [Mobility Radeon HD 2400 XT] vendor: Apple driver: radeon
v: kernel bus ID: 01:00.0
Display: x11 server: X.Org 1.19.2 driver: ati,radeon unloaded: fbdev,modesetting,vesa
resolution: 1680x1050~60Hz
OpenGL: renderer: AMD RV610 (DRM 2.50.0 / 4.19.0-5-amd64 LLVM 7.0.0)
v: 3.3 Mesa 18.2.6 direct render: Yes
Audio: Device-1: Intel 82801H HD Audio vendor: Apple driver: snd_hda_intel v: kernel
bus ID: 00:1b.0
Sound Server: ALSA v: k4.19.0-5-amd64
Network: Device-1: Broadcom Limited BCM4321 802.11a/b/g/n vendor: Apple AirPort Extreme
driver: b43-pci-bridge v: N/A port: 3000 bus ID: 04:00.0
Device-2: Marvell 88E8058 PCI-E Gigabit Ethernet driver: sky2 v: 1.30 port: 2000
bus ID: 05:00.0
IF: eth0 state: down mac: <filter>
IF-ID-1: wlan0 state: down mac: <filter>
Drives: Local Storage: total: 231.04 GiB used: 27.9 MiB (0.0%)
ID-1: /dev/sda vendor: SanDisk model: SDSSDX240GG25 size: 223.57 GiB
ID-2: /dev/sdb type: USB model: General USB Flash Disk size: 7.47 GiB
Partition: ID-1: / size: 750.0 MiB used: 22.4 MiB (3.0%) fs: overlay source: ERR-102
ID-2: swap-1 size: 3.00 GiB used: 5.5 MiB (0.2%) fs: swap dev: /dev/sda3
Sensors: System Temperatures: cpu: 61.0 C mobo: N/A gpu: radeon temp: 34 C
Fan Speeds (RPM): cpu: 1197
Repos: Active apt repos in: /etc/apt/sources.list.d/antix.list
1: deb http://iso.mxrepo.com/antix/stretch stretch main
Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
1: deb http://ftp.us.debian.org/debian/ stretch-updates main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://ftp.us.debian.org/debian/ stretch main contrib non-free
2: deb http://security.debian.org/ stretch/updates main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://mxrepo.com/mx/repo/ stretch main non-free
No active apt repos in: /etc/apt/sources.list.d/various.list
Info: Processes: 181 Uptime: 1m Memory: 983.7 MiB used: 485.4 MiB (49.3%) Init: SysVinit
runlevel: 5 Compilers: gcc: 6.3.0 Shell: bash v: 4.4.12 inxi: 3.0.33
Last edited by Yellowhoney on Tue Jun 11, 2019 7:14 am, edited 1 time in total.
2007 20* Imac running 3gb MX18.3
i5 4670k 16gb ram
i5 4670k 16gb ram
- Yellowhoney
- Posts: 53
- Joined: Sat Apr 20, 2019 5:36 am
Re: Help installing to Mac 2007
Oh, OK.
Please read the Forum Rules, How To Ask For Help, How to Break Your System and Don't Break Debian. Always include your full Quick System Info (QSI) with each and every new help request.
Re: Help installing to Mac 2007
I'm not fully understand what you are talking about.... but anyway,Yellowhoney wrote: ↑Tue Jun 11, 2019 7:10 am Ive pull 1 stick of ram out , because i thought it might be faulty ( it take a long time to load EFI ) ( 7-10 min)
but now i think it because it USB1 right ?
As you are now booting with the Live USB.
Do post the output
Code: Select all
sudo lsblk -f
Code: Select all
sudo parted --list
Gigabyte Z77M-D3H, Intel Xeon E3-1240 V2 (Quad core), 32GB RAM,
GeForce GTX 770, Samsung SSD 850 EVO 500GB, Seagate Barracuda 4TB
GeForce GTX 770, Samsung SSD 850 EVO 500GB, Seagate Barracuda 4TB
- Yellowhoney
- Posts: 53
- Joined: Sat Apr 20, 2019 5:36 am
Re: Help installing to Mac 2007
Code: Select all
$ sudo lsblk -f
We trust you have received the usual lecture from the local System
Administrator. It usually boils down to these three things:
#1) Respect the privacy of others.
#2) Think before you type.
#3) With great power comes great responsibility.
NAME FSTYPE LABEL UUID MOUNTPOINT
loop0 squashfs /live/linux
sda
└─sda3 swap d7e8182c-0d50-47ad-8902-337e8e2f9097 [SWAP]
sdb iso9660 antiXlive 2019-05-26-00-15-38-00
├─sdb1 iso9660 antiXlive 2019-05-26-00-15-38-00 /live/boot-dev
└─sdb2 vfat MX-uefi 03C5-9D27
sr0
demo@mx1:~
$ sudo parted --list
Model: ATA SanDisk SDSSDX24 (scsi)
Disk /dev/sda: 240GB
Sector size (logical/physical): 512B/512B
Partition Table: gpt
Disk Flags:
Number Start End Size File system Name Flags
3 237GB 240GB 3217MB linux-swap(v1)
Model: General USB Flash Disk (scsi)
Disk /dev/sdb: 8023MB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Disk Flags:
Number Start End Size Type File system Flags
2 182kB 3594kB 3412kB primary esp
demo@mx1:~
$
2007 20* Imac running 3gb MX18.3
i5 4670k 16gb ram
i5 4670k 16gb ram
Re: Help installing to Mac 2007
Hmm ..not sure how to read this...only swap partition is seen.Yellowhoney wrote: ↑Tue Jun 11, 2019 8:33 amCode: Select all
$ sudo lsblk -f NAME FSTYPE LABEL UUID MOUNTPOINT sda sda3 swap d7e8182c-0d50-47ad-8902-337e8e2f9097 [SWAP] $ sudo parted --list Model: ATA SanDisk SDSSDX24 (scsi) Disk /dev/sda: 240GB Partition Table: gpt Number Start End Size File system Name Flags 3 237GB 240GB 3217MB linux-swap(v1)
Suggest to reinstall. Do select autoinstall on the whole drive.
Do start the install in this way:
Code: Select all
sudo -E minstall 2>&1 | tee -a my_install.log
Reboot with the LiveUSB and run again
Code: Select all
sudo lsblk -f
Code: Select all
sudo parted --list
Code: Select all
sudo fdisk --list
the 32bit UEFI with installing the 32bit grub-efi bootloader manually.
Gigabyte Z77M-D3H, Intel Xeon E3-1240 V2 (Quad core), 32GB RAM,
GeForce GTX 770, Samsung SSD 850 EVO 500GB, Seagate Barracuda 4TB
GeForce GTX 770, Samsung SSD 850 EVO 500GB, Seagate Barracuda 4TB