Mystery Device - GALPon MiniNo

[Clive]

Greetings,
Newbie here. Installed MX recently and finding my way around.In my list of devices (viewed in File Manager) there's a named device which I don't recognise. It's labelled GALPon MiniNo. When I try to mount it to see what it is I get the error message (see attached text file).I'm in a dual boot situation with Win 10 64 bit at ID-4: /dev/sdd vendor: Samsung model: SSD 850 PRO 256GB size: 238.47 GiB and MX at ID-3: /dev/sdc vendor: Seagate model: ST3320620AS size: 298.09 GiB . Should I ignore it as an anomoly or is there a remedy? Thank you.

Code: Select all

Speed: 3999 MHz min/max: 800/4000 MHz Core speeds (MHz): 1: 3999 2: 3999 3: 3999 
           4: 3999 
Graphics:  Device-1: NVIDIA GF119 [GeForce GT 610] driver: nouveau v: kernel 
           Display: x11 server: X.Org 1.19.2 driver: nouveau unloaded: fbdev,modesetting,vesa 
           resolution: 1920x1080~60Hz 
           OpenGL: renderer: NVD9 v: 4.3 Mesa 18.2.6 
Audio:     Device-1: Intel 9 Series Family HD Audio driver: snd_hda_intel 
           Device-2: NVIDIA GF119 HDMI Audio driver: snd_hda_intel 
           Sound Server: ALSA v: k4.19.0-5-amd64 
Network:   Device-1: Intel Ethernet I218-V driver: e1000e 
           IF: eth1 state: up speed: 1000 Mbps duplex: full mac: d0:50:99:71:90:1b 
           Device-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet driver: r8169 
           IF: eth0 state: down mac: d0:50:99:71:90:19 
           IF-ID-1: eth2 state: down mac: 6a:96:7b:f3:ff:85 
Drives:    Local Storage: total: 6.27 TiB used: 285.21 GiB (4.4%) 
           ID-1: /dev/sda vendor: Western Digital model: WD60EZRX-00MVLB1 size: 5.46 TiB 
           ID-2: /dev/sdb vendor: Seagate model: ST3320620AS size: 298.09 GiB 
           ID-3: /dev/sdc vendor: Seagate model: ST3320620AS size: 298.09 GiB 
           ID-4: /dev/sdd vendor: Samsung model: SSD 850 PRO 256GB size: 238.47 GiB 
Partition: ID-1: / size: 136.90 GiB used: 8.33 GiB (6.1%) fs: ext4 dev: /dev/sdc5 
           ID-2: /home size: 139.26 GiB used: 1.25 GiB (0.9%) fs: ext4 dev: /dev/sdc7 
           ID-3: swap-1 size: 15.48 GiB used: 0 KiB (0.0%) fs: swap dev: /dev/sdc6 
Sensors:   System Temperatures: cpu: 57.0 C mobo: N/A gpu: nouveau temp: 46 C 
           Fan Speeds (RPM): N/A 
Info:      Processes: 229 Uptime: 3h 38m Memory: 15.62 GiB used: 3.46 GiB (22.1%) Shell: bash 
           inxi: 3.0.33 
clive@MXLinux:~

[Eadwine Rose]

Do/did you have a partition with this distro on there? First result when googling:
https://minino.galpon.org/en


Also.. try what it suggests:

In some cases useful info is found in syslog - try
dmesg | tail or so.

[Richard]

It's a small text file telling you that the CD for GALPon MiniNo did not mount.

Do you have a CD/DVD in the unit?
Perhaps the media is damaged?

Error mounting /dev/sdc1 at /media/clive/GALPon MiniNo: Command-line `mount -t "iso9660" -o ...

You could rename the file to see if I reappears.

[Clive]

Do/did you have a partition with this distro on there? First result when googling:
https://minino.galpon.org/en


Also.. try what it suggests:

In some cases useful info is found in syslog - try
dmesg | tail or so.

• No I didn't

• As a newbie I need some help as I don't know how to try what it suggests. I know that I need to use Terminal, but don't the command

[Clive]

It's a small text file telling you that the CD for GALPon MiniNo did not mount.

Do you have a CD/DVD in the unit?
Perhaps the media is damaged?

Error mounting /dev/sdc1 at /media/clive/GALPon MiniNo: Command-line `mount -t "iso9660" -o ...

You could rename the file to see if I reappears.

I installed MX from USB. No CD/DVD in drive. It's listed as a device - so is the device the CD/DVD player? If I eject it will that clear it from the device list? I don't understand your suggestion to rename file. Sorry, but I am a newbie

[Richard]

Ok.
Yes, eject the CD from the drive if there is one.
The media may be damaged?

Sometimes, instead of just erasing a file,
you could Rename it using a right click inThunar.
Then, if it turns out that you really need the file, you only need to rename it again.