Welcome!
Important information
-- Spectre and Meltdown vulnerabilities
-- Change in MX sources

News
-- MX Linux on social media: here
-- Mepis support still here

Current releases
-- MX-17.1 Final release info here
-- antiX-17 release info here

New users
-- Please read this first, and don't forget to add system and hardware information to posts!
-- Here are the Forum Rules

Installation issues and concerns

Message
Author
Byteria
Forum Novice
Forum  Novice
Posts: 23
Joined: Wed Jun 13, 2018 10:23 am

Re: Installation issues and concerns

#61 Post by Byteria » Thu Jun 14, 2018 3:03 pm

For a new try:

- Photograph verbose Boot, showing any warning about Intel i915 and others
- Boot Menu ─ no change in Lang, Timezone; ─ and let F6 "Failsafe"?
- apt-get update, apt-get upgrade, ─ or "dist-upgrade"
- apt-get install mx-installer
- unmount all no-system (Live) partitions
- no Pendrive
- turn off Power savings
- no other app, except Terminal
- sudo -E /usr/sbin/minstall

Any sugestions?

User avatar
Richard
Posts: 1815
Joined: Fri Dec 12, 2008 10:31 am

Re: Installation issues and concerns

#62 Post by Richard » Thu Jun 14, 2018 3:19 pm

An impressive group.
A distro hopper's dream. :)
Or a reviewer's.
MX17.1____: T430-2017, 8 GB RAM, 4.15.0-1-amd64, 119 SSD
antiX-/MX-171: AA1/Eee, 1 GB RAM, 4.15.0-1-686-pae, 149 HDD
DC9, LibO605, Dropbox, FF61, FFesr, mPDFed, Py3, CherryT, Vbox
linux counter #288562

User avatar
dolphin_oracle
Forum Veteran
Forum Veteran
Posts: 8778
Joined: Sun Dec 16, 2007 1:17 pm

Re: Installation issues and concerns

#63 Post by dolphin_oracle » Thu Jun 14, 2018 3:21 pm

I'm going to set up a bunch of partitions, hopefully tonight, and see if I can duplicate the issue.
http://www.youtube.com/runwiththedolphin
lenovo ThinkPad T530 - MX-17
lenovo s21e & 100s - antiX-17, MX17(live-usb)
FYI: mx "test" repo is not the same thing as debian testing repo.

User avatar
fehlix
Forum Regular
Forum Regular
Posts: 842
Joined: Wed Apr 11, 2018 5:09 pm

Re: Installation issues and concerns

#64 Post by fehlix » Thu Jun 14, 2018 3:41 pm

Byteria wrote:
Thu Jun 14, 2018 3:03 pm
For a new try:

- Photograph verbose Boot, showing any warning about Intel i915 and others
- Boot Menu ─ no change in Lang, Timezone; ─ and let F6 "Failsafe"?
- apt-get update, apt-get upgrade, ─ or "dist-upgrade"
- apt-get install mx-installer
- unmount all no-system (Live) partitions
- no Pendrive
- turn off Power savings
- no other app, except Terminal
- sudo -E /usr/sbin/minstall

Any sugestions?
apt-get update
apt-get dist-upgrade
please.

Just a small one: Could you do some partions checks within Gparted from
the booted live system at least on the partions you are going to use.
The partitons shown by fdisks seem to be done well.

Another tiny one: would you run GsmartControl to check the health
of the drive, just a small test-check of 2 minutes. Just to be sure.

And a tiny small "expert" advice for having many partions on a big drive:
It's advisable to leave between partions a small amount of something like 4MB empty space.
The reason some tools (not all!) just do have issues having no byte left between end/start
of partions when it comes to manipulate the partition start-record.
Even if this space sometimes is only used temporary. Yes I've had those issues.
You might have seen such partions-layouts, and might have wondered, why they do
have such spaces inbetween. Thats for MBR and GPT partion table layout.
Thanks.
ttfn
:snail:

Byteria
Forum Novice
Forum  Novice
Posts: 23
Joined: Wed Jun 13, 2018 10:23 am

Re: Installation issues and concerns

#65 Post by Byteria » Thu Jun 14, 2018 4:57 pm

fehlix wrote:
Thu Jun 14, 2018 3:41 pm
Byteria wrote:
Thu Jun 14, 2018 3:03 pm
For a new try:

- Photograph verbose Boot, showing any warning about Intel i915 and others
- Boot Menu ─ no change in Lang, Timezone; ─ and let F6 "Failsafe"?
- apt-get update, apt-get upgrade, ─ or "dist-upgrade"
- apt-get install mx-installer
- unmount all no-system (Live) partitions
- no Pendrive
- turn off Power savings
- no other app, except Terminal
- sudo -E /usr/sbin/minstall

Any sugestions?
apt-get update
apt-get dist-upgrade
please.

Just a small one: Could you do some partions checks within Gparted from
the booted live system at least on the partions you are going to use.
The partitons shown by fdisks seem to be done well.

Another tiny one: would you run GsmartControl to check the health
of the drive, just a small test-check of 2 minutes. Just to be sure.

And a tiny small "expert" advice for having many partions on a big drive:
It's advisable to leave between partions a small amount of something like 4MB empty space.
The reason some tools (not all!) just do have issues having no byte left between end/start
of partions when it comes to manipulate the partition start-record.
Even if this space sometimes is only used temporary. Yes I've had those issues.
You might have seen such partions-layouts, and might have wondered, why they do
have such spaces inbetween. Thats for MBR and GPT partion table layout.
Thanks.
ttfn
:snail:
Ok, I will do partition checks ─ maybe target partitions Linux11, Home11, Swap11, ─ or also other (non-inveolved) partitions, e.g. Linux9 (sdc1) used by Arch Linux?

GSmartControl ─ Short self-test (2 minutes) ─ No error.

Output:

Code: Select all

smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-1-amd64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     SAMSUNG HM100UX (S2 Portable)
Device Model:     SAMSUNG HM100UX
Serial Number:    C5942E86AA2DSZ
LU WWN Device Id: 5 0000f0 0aaeb002d
Firmware Version: 2AM10001
User Capacity:    1,000,204,886,016 bytes [1.00 TB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    5400 rpm
Form Factor:      2.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 6
SATA Version is:  SATA 2.6, 3.0 Gb/s
Local Time is:    Thu Jun 14 17:44:04 2018 -03
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x80)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(15000) seconds.
Offline data collection
capabilities: 			 (0x5b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 ( 250) minutes.
SCT capabilities: 	       (0x003f)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   100   100   051    Pre-fail  Always       -       1
  2 Throughput_Performance  0x0026   055   055   000    Old_age   Always       -       13684
  3 Spin_Up_Time            0x0023   081   080   025    Pre-fail  Always       -       5975
  4 Start_Stop_Count        0x0032   097   097   000    Old_age   Always       -       3092
  5 Reallocated_Sector_Ct   0x0033   252   252   010    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x002e   252   252   051    Old_age   Always       -       0
  8 Seek_Time_Performance   0x0024   252   252   015    Old_age   Offline      -       0
  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       2850
 10 Spin_Retry_Count        0x0032   252   252   051    Old_age   Always       -       0
 11 Calibration_Retry_Count 0x0032   100   100   000    Old_age   Always       -       145
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       559
181 Program_Fail_Cnt_Total  0x0022   099   099   ---    Old_age   Always       -       43256347
191 G-Sense_Error_Rate      0x0022   100   100   000    Old_age   Always       -       241
192 Power-Off_Retract_Count 0x0022   252   252   000    Old_age   Always       -       0
194 Temperature_Celsius     0x0002   061   051   000    Old_age   Always       -       39 (Min/Max 19/49)
195 Hardware_ECC_Recovered  0x003a   100   100   000    Old_age   Always       -       0
196 Reallocated_Event_Count 0x0032   252   252   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   252   252   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   252   252   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0036   100   100   000    Old_age   Always       -       8
200 Multi_Zone_Error_Rate   0x002a   100   100   000    Old_age   Always       -       6
223 Load_Retry_Count        0x0032   100   100   000    Old_age   Always       -       145
225 Load_Cycle_Count        0x0032   094   094   000    Old_age   Always       -       65088

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%      2850         -
# 2  Extended offline    Aborted by host               90%      2850         -
# 3  Extended offline    Completed without error       00%      2823         -
# 4  Extended offline    Aborted by host               40%      2427         -
# 5  Extended offline    Aborted by host               50%      2170         -
# 6  Extended offline    Completed without error       00%      1823         -
# 7  Extended offline    Interrupted (host reset)      60%      1445         -
# 8  Extended offline    Interrupted (host reset)      20%      1132         -
# 9  Extended offline    Aborted by host               80%       725         -
#10  Extended offline    Aborted by host               80%       722         -
#11  Extended offline    Interrupted (host reset)      80%       649         -
#12  Extended offline    Aborted by host               90%       597         -
#13  Extended offline    Aborted by host               90%       596         -
#14  Extended offline    Aborted by host               80%       596         -
#15  Extended offline    Aborted by host               70%       595         -
#16  Extended offline    Aborted by host               60%       593         -
#17  Extended offline    Aborted by host               60%       562         -
#18  Extended offline    Aborted by host               90%       548         -
#19  Extended offline    Aborted by host               50%       543         -
#20  Extended offline    Aborted by host               70%       520         -
#21  Extended offline    Aborted by host               40%       514         -

SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Completed [00% left] (0-65535)
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
It's advisable to leave between partions a small amount of something like 4MB empty space.
Thanks, I will remember this! ─ It cannot be done immediately, without re-partitioning all 3 HDDs and external SSD ─ and deleting all installed distros.

CORRECTION: - Yes, it can be done. I was forgetting GParted shrink.
Last edited by Byteria on Thu Jun 14, 2018 5:27 pm, edited 1 time in total.

User avatar
dolphin_oracle
Forum Veteran
Forum Veteran
Posts: 8778
Joined: Sun Dec 16, 2007 1:17 pm

Re: Installation issues and concerns

#66 Post by dolphin_oracle » Thu Jun 14, 2018 5:14 pm

Byteria wrote:
Thu Jun 14, 2018 4:57 pm
fehlix wrote:
Thu Jun 14, 2018 3:41 pm
Byteria wrote:
Thu Jun 14, 2018 3:03 pm
For a new try:

- Photograph verbose Boot, showing any warning about Intel i915 and others
- Boot Menu ─ no change in Lang, Timezone; ─ and let F6 "Failsafe"?
- apt-get update, apt-get upgrade, ─ or "dist-upgrade"
- apt-get install mx-installer
- unmount all no-system (Live) partitions
- no Pendrive
- turn off Power savings
- no other app, except Terminal
- sudo -E /usr/sbin/minstall

Any sugestions?
apt-get update
apt-get dist-upgrade
please.

Just a small one: Could you do some partions checks within Gparted from
the booted live system at least on the partions you are going to use.
The partitons shown by fdisks seem to be done well.

Another tiny one: would you run GsmartControl to check the health
of the drive, just a small test-check of 2 minutes. Just to be sure.

And a tiny small "expert" advice for having many partions on a big drive:
It's advisable to leave between partions a small amount of something like 4MB empty space.
The reason some tools (not all!) just do have issues having no byte left between end/start
of partions when it comes to manipulate the partition start-record.
Even if this space sometimes is only used temporary. Yes I've had those issues.
You might have seen such partions-layouts, and might have wondered, why they do
have such spaces inbetween. Thats for MBR and GPT partion table layout.
Thanks.
ttfn
:snail:
Ok, I will do partition checks ─ maybe target partitions Linux11, Home11, Swap11, ─ or also other (non-inveolved) partitions, e.g. Linux9 (sdc1) used by Arch Linux?

GSmartControl ─ Short self-test (2 minutes) ─ No error.

Output:

Code: Select all

smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-1-amd64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     SAMSUNG HM100UX (S2 Portable)
Device Model:     SAMSUNG HM100UX
Serial Number:    C5942E86AA2DSZ
LU WWN Device Id: 5 0000f0 0aaeb002d
Firmware Version: 2AM10001
User Capacity:    1,000,204,886,016 bytes [1.00 TB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    5400 rpm
Form Factor:      2.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 6
SATA Version is:  SATA 2.6, 3.0 Gb/s
Local Time is:    Thu Jun 14 17:44:04 2018 -03
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x80)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(15000) seconds.
Offline data collection
capabilities: 			 (0x5b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 ( 250) minutes.
SCT capabilities: 	       (0x003f)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   100   100   051    Pre-fail  Always       -       1
  2 Throughput_Performance  0x0026   055   055   000    Old_age   Always       -       13684
  3 Spin_Up_Time            0x0023   081   080   025    Pre-fail  Always       -       5975
  4 Start_Stop_Count        0x0032   097   097   000    Old_age   Always       -       3092
  5 Reallocated_Sector_Ct   0x0033   252   252   010    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x002e   252   252   051    Old_age   Always       -       0
  8 Seek_Time_Performance   0x0024   252   252   015    Old_age   Offline      -       0
  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       2850
 10 Spin_Retry_Count        0x0032   252   252   051    Old_age   Always       -       0
 11 Calibration_Retry_Count 0x0032   100   100   000    Old_age   Always       -       145
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       559
181 Program_Fail_Cnt_Total  0x0022   099   099   ---    Old_age   Always       -       43256347
191 G-Sense_Error_Rate      0x0022   100   100   000    Old_age   Always       -       241
192 Power-Off_Retract_Count 0x0022   252   252   000    Old_age   Always       -       0
194 Temperature_Celsius     0x0002   061   051   000    Old_age   Always       -       39 (Min/Max 19/49)
195 Hardware_ECC_Recovered  0x003a   100   100   000    Old_age   Always       -       0
196 Reallocated_Event_Count 0x0032   252   252   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   252   252   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   252   252   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0036   100   100   000    Old_age   Always       -       8
200 Multi_Zone_Error_Rate   0x002a   100   100   000    Old_age   Always       -       6
223 Load_Retry_Count        0x0032   100   100   000    Old_age   Always       -       145
225 Load_Cycle_Count        0x0032   094   094   000    Old_age   Always       -       65088

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%      2850         -
# 2  Extended offline    Aborted by host               90%      2850         -
# 3  Extended offline    Completed without error       00%      2823         -
# 4  Extended offline    Aborted by host               40%      2427         -
# 5  Extended offline    Aborted by host               50%      2170         -
# 6  Extended offline    Completed without error       00%      1823         -
# 7  Extended offline    Interrupted (host reset)      60%      1445         -
# 8  Extended offline    Interrupted (host reset)      20%      1132         -
# 9  Extended offline    Aborted by host               80%       725         -
#10  Extended offline    Aborted by host               80%       722         -
#11  Extended offline    Interrupted (host reset)      80%       649         -
#12  Extended offline    Aborted by host               90%       597         -
#13  Extended offline    Aborted by host               90%       596         -
#14  Extended offline    Aborted by host               80%       596         -
#15  Extended offline    Aborted by host               70%       595         -
#16  Extended offline    Aborted by host               60%       593         -
#17  Extended offline    Aborted by host               60%       562         -
#18  Extended offline    Aborted by host               90%       548         -
#19  Extended offline    Aborted by host               50%       543         -
#20  Extended offline    Aborted by host               70%       520         -
#21  Extended offline    Aborted by host               40%       514         -

SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Completed [00% left] (0-65535)
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
It's advisable to leave between partions a small amount of something like 4MB empty space.
Thanks, I will remember this! ─ It cannot be done immediately, without re-partitioning all 3 HDDs and external SSD ─ and deleting all installed distros.

I'm honestly thinking that before you do any reformatting, just diconnect three of the drives first (all but the target drive) to see if the installer works then. iF so, we will know there is a problem in the drive parsing, if not, then no harm done.
http://www.youtube.com/runwiththedolphin
lenovo ThinkPad T530 - MX-17
lenovo s21e & 100s - antiX-17, MX17(live-usb)
FYI: mx "test" repo is not the same thing as debian testing repo.

Byteria
Forum Novice
Forum  Novice
Posts: 23
Joined: Wed Jun 13, 2018 10:23 am

Re: Installation issues and concerns

#67 Post by Byteria » Thu Jun 14, 2018 5:24 pm

dolphin_oracle wrote:
Thu Jun 14, 2018 3:21 pm
I'm going to set up a bunch of partitions, hopefully tonight, and see if I can duplicate the issue.
Thanks!

I will be waiting for your results.

I was thinking to remove Manjaro, ─ but it have been installed só recently, that I have used very little.

Byteria
Forum Novice
Forum  Novice
Posts: 23
Joined: Wed Jun 13, 2018 10:23 am

Re: Installation issues and concerns

#68 Post by Byteria » Thu Jun 14, 2018 5:41 pm

@dolphin_oracle
I'm honestly thinking that before you do any reformatting, just diconnect three of the drives first (all but the target drive) to see if the installer works then. iF so, we will know there is a problem in the drive parsing, if not, then no harm done.
It can be done later, ─ but if I would do it now, we will never know which of the providences (above) would in fact have solved the Installer hangs.

Remember that antiX has been installed with the "same" Installer (maybe a little different), ─ and recently cli-installer had no problem, ─ and last 18 months many other distros have been installed without problems, too.

So, I think that disconnect the 3 HDDs should be tryed after this next planned test.

User avatar
dolphin_oracle
Forum Veteran
Forum Veteran
Posts: 8778
Joined: Sun Dec 16, 2007 1:17 pm

Re: Installation issues and concerns

#69 Post by dolphin_oracle » Thu Jun 14, 2018 6:01 pm

my other thought is to step down to the 4.9 debian kernel, which antiX uses. there are a couple of known issues with certain motherboards and the 4.15 kernel. there are threads posted here on the forum about it. I know a couple of dell laptops have the issue, but don't know what else.

I just finished an install onto partition 11 of a 4 disk system. its admittingly a virtualbox system, but its the best I can do. No problems on this end, so we are back to something a little more esoteric.

Code: Select all

dolphin@mx:~
$ blkid
/dev/sda1: UUID="d933e779-e8a5-4f97-a1b4-ffbfc419a893" TYPE="ext4" PARTUUID="8450a00b-01"
/dev/sda2: UUID="9c8e46a1-c380-44d0-86e5-bc20c7371b18" TYPE="swap" PARTUUID="8450a00b-02"
/dev/sdb1: UUID="7e444bd9-72c5-4e80-9081-f645dc04f122" TYPE="ext4" PARTUUID="13c5ef49-918e-4f8f-9a8e-ebe4ee0526f9"
/dev/sdb2: UUID="ccb71684-d71d-4b71-9a54-70b9f033b8fd" TYPE="swap" PARTUUID="89fa11c9-fe69-4387-a182-59ab84cef92f"
/dev/sdc1: UUID="4d030a8a-7954-4aca-b135-ace1d28485c3" TYPE="ext4" PARTUUID="bc6b037b-01"
/dev/sdc2: UUID="488cd14e-04b4-44c4-83ca-1d214bddb57c" TYPE="swap" PARTUUID="bc6b037b-02"
/dev/sdd1: UUID="3b977fed-e64f-410a-aec6-1d8e666c222e" TYPE="ext4" PARTUUID="7582a56d-8adc-4902-8a9a-4033bac43094"
/dev/sdd2: UUID="9a3e02f7-61e1-43e3-b389-9f3a7b74ed11" TYPE="ext4" PARTUUID="a6d60d7c-e75a-40a8-bc73-71393e842058"
/dev/sdd3: UUID="6a7e37a1-f071-4c88-b34e-58905f8cc7f9" TYPE="ext4" PARTUUID="2614a2ba-30c8-426d-ae19-f0a39c7daac6"
/dev/sdd4: UUID="891b2116-0a25-4ac7-8005-89ee262a381d" TYPE="ext4" PARTUUID="c5925c1b-4b89-4310-b787-5b661d8c3fce"
/dev/sdd5: UUID="72927969-580a-47df-9384-60577c19ac3b" TYPE="ext4" PARTUUID="daee29b3-e723-4d34-8e71-f72e072e3d4c"
/dev/sdd6: UUID="227e77df-abdf-4eed-8072-2bc83bf57840" TYPE="ext4" PARTUUID="5a42be69-6269-4126-9582-5eae28fa5589"
/dev/sdd7: UUID="f3cbcdcc-e8ad-4e7b-b35e-794b077201d6" TYPE="ext4" PARTUUID="4f3e6591-68bd-4ffb-bd10-f625a0e874a1"
/dev/sdd8: UUID="b2d00bd0-04ec-44d3-bb92-8e2b6ad0a376" TYPE="ext4" PARTUUID="7ebb38b2-02b2-423b-8fa3-f70cd0466983"
/dev/sdd9: UUID="26c3372a-0f23-4141-8f6b-d5dbcdac1982" TYPE="ext4" PARTUUID="40940a77-144f-4468-bde5-1f1c3a14ca0f"
/dev/sdd10: UUID="8aa0c3d6-37df-4813-8fea-3fb6a5a48b81" TYPE="ext4" PARTUUID="56b46718-6fa4-4296-b029-1ce77df68f58"
/dev/sdd11: LABEL="rootMX17.1" UUID="d5a7c7e8-f316-4ac7-8d74-9793d6d7fa94" TYPE="ext4" PARTUUID="041baec2-5328-494c-8968-41a1576f40be"
/dev/sdd12: UUID="95e8553b-0ac2-4b8f-b300-791de972c13e" TYPE="swap" PARTUUID="673782b3-9c70-4b7f-b517-db03d665f32d"
after the installer update, the only difference in the installer between antiX and MX is the kernel version. the live system and and all the other bits are identical.
http://www.youtube.com/runwiththedolphin
lenovo ThinkPad T530 - MX-17
lenovo s21e & 100s - antiX-17, MX17(live-usb)
FYI: mx "test" repo is not the same thing as debian testing repo.

User avatar
dolphin_oracle
Forum Veteran
Forum Veteran
Posts: 8778
Joined: Sun Dec 16, 2007 1:17 pm

Re: Installation issues and concerns

#70 Post by dolphin_oracle » Thu Jun 14, 2018 6:16 pm

you could try the mx17 release, which has a different kernel. theming is a little different, but updating through the regular process will get you a mx17.1 after updates.
http://www.youtube.com/runwiththedolphin
lenovo ThinkPad T530 - MX-17
lenovo s21e & 100s - antiX-17, MX17(live-usb)
FYI: mx "test" repo is not the same thing as debian testing repo.

Post Reply

Return to “Installation”