The Good/Bad Old Days

Here you can just talk about MX or post interesting topics about what you have done in MX that you want to share with others. Other non-MX topics can be discussed within the Rules of the Forum.
Message
Author
User avatar
timkb4cq
Developer
Posts: 3186
Joined: Wed Jul 12, 2006 4:05 pm

Re: The Good/Bad Old Days

#11 Post by timkb4cq »

He should have used GOSUB so had a way to return ;)

Learned DECBasic in 1973 at High School. PDP-8e w/ 8k hand wired core memory, Four Teletype terminals sharing that memory and punched paper tape. I wrote a program to punch out mini banners on that paper tape that was quite a hit. The following year there were other students trying to take credit for writing it - but I had formatted the code in a quirky way so the teacher knew better.

Since then I've done small bits of programming in over a dozen languages but never as a full-time coder or developer, so my knowledge in that area is a mile wide but only a few inches deep.
HP Pavillion TP01, AMD Ryzen 3 5300G (quad core), Crucial 500GB SSD, Toshiba 6TB 7200rpm
Dell Inspiron 15, AMD Ryzen 7 2700u (quad core). Sabrent 500GB nvme, Seagate 1TB

User avatar
richb
Administrator
Posts: 10323
Joined: Wed Jul 12, 2006 2:17 pm

Re: The Good/Bad Old Days

#12 Post by richb »

First real experience was paper tape and a teletype on my first job I wrote a program to calculate spring parameters. Then fooled around with Visual Basic to design a golf league program for a spreadsheet.
Forum Rules
Guide - How to Ask for Help

richb Administrator
System: MX 23 KDE
AMD A8 7600 FM2+ CPU R7 Graphics, 16 GIG Mem. Three Samsung EVO SSD's 250 GB

User avatar
manyroads
Posts: 2603
Joined: Sat Jun 30, 2018 6:33 pm

Re: The Good/Bad Old Days

#13 Post by manyroads »

I remember programming jingle bells in octal; output the program as a punch paper tape; and listened to the console bell play the tune. Ahhhhhh. :confused:
Pax vobiscum,
Mark Rabideau - ManyRoads Genealogy -or- eirenicon llc. (geeky stuff)
i3wm, bspwm, hlwm, dwm, spectrwm ~ Linux #449130
"For every complex problem there is an answer that is clear, simple, and wrong." -- H. L. Mencken

User avatar
handy
Posts: 611
Joined: Mon Apr 23, 2018 2:00 pm

Re: The Good/Bad Old Days

#14 Post by handy »

My introduction to computers was via a "Casio FX 770p" programmable calculator. It allowed you to make & store a number of simple programs in BASIC. I think my program for Ohm's Law was likely the first useful thing that I managed to do with it.

Then a year on in 1987 I got myself one of the first crop of Amiga 500's to arrive in Oz. That computer changed my life dramatically forever. I ended up writing AmigaDOS tutorials & software reviews in creator/editor Tim Strachan's magazine on disk "Megadisc". We had no internet in those days, & Megadisc was, for those in the know, highly regarded around the world. No advertisements, just high quality, useful contributions from Amiga freaks. They were good old days. :)

I got to review (& as was the case, keep the $300+ software package) the last version of CanDo. CanDo is really the only programming language that I have ever learned. I've looked & found no equal to it. I spent ~6 months of long days/nights & wrote myself a directory utility that was very similar to Jonathon Potter's Directory Opus (DOpus) v4.*. except mine didn't have the built in configuration utility. So any changes that I needed to make had to be programmed in. I made a simple text editor & image viewer that were attached to the dirutil. It was all so much fun. Teaching myself to program was so stimulating, challenging & satisfying.

For anyone interested, a very good write up of CanDo can be found here:

https://randocity.com/2018/03/27/cando- ... nt-page-1/

After Commodore finally finished killing off the Amiga, in that incredibly long drawn out & painful way. I ended up on Win 3.11 briefly before Win95 was finally released. I went & bought Visual Basic in the hope that it would be similar to CanDo. I spent some time with it & decided it was a most horribly ugly piece of software & sold it.

I've learned what I've needed to do jobs that I wanted to do writing scripts in Bash. But my days of learning languages are certainly over now... These days, if I had the enthusiasm (which I don't) I'd likely learn Python. Won't happen.
Last edited by handy on Mon Dec 24, 2018 7:17 am, edited 1 time in total.
1_MSI: MAG B560 TORP', i5, RAM 16GB, GTX 1070 Ti 12GB, M2 238GB + USB, MX-23 Fb to Openbox
2_Lenovo: Ideapad 520S, i5, RAM 8GB, GPU i620, HDD 1TB, MX-21 - Openbox
3_Clevo: P150SM-A, i7, RAM 16GB, nVidia 8600, 2x 1TB HDD & M.2 256 GB, MX-21 - Openbox

User avatar
Eadwine Rose
Administrator
Posts: 11899
Joined: Wed Jul 12, 2006 2:10 am

Re: The Good/Bad Old Days

#15 Post by Eadwine Rose »

Speaking of 95, I still have some floppies lying around with win 95 on them. Lol
MX-23.2_x64 July 31 2023 * 6.1.0-18-amd64 ext4 Xfce 4.18.1 * 8core AMD Ryzen 7 2700
Asus TUF B450-Plus Gaming UEFI * Asus GTX 1050 Ti Nvidia 525.147.05 * 2x16Gb DDR4 2666 Kingston HyperX Predator
Samsung 860EVO * Samsung S24D330 & P2250 * HP Envy 5030

User avatar
handy
Posts: 611
Joined: Mon Apr 23, 2018 2:00 pm

Re: The Good/Bad Old Days

#16 Post by handy »

God, I just realised that I said 2007 when I the truth was 1987 when I bought my first Amiga computer! doh! lol Getting old is great isn't it?
1_MSI: MAG B560 TORP', i5, RAM 16GB, GTX 1070 Ti 12GB, M2 238GB + USB, MX-23 Fb to Openbox
2_Lenovo: Ideapad 520S, i5, RAM 8GB, GPU i620, HDD 1TB, MX-21 - Openbox
3_Clevo: P150SM-A, i7, RAM 16GB, nVidia 8600, 2x 1TB HDD & M.2 256 GB, MX-21 - Openbox

User avatar
zoli62
Posts: 41
Joined: Tue Dec 18, 2018 7:55 am

Re: The Good/Bad Old Days

#17 Post by zoli62 »

Someone still remember Fortran? I met him at university. Otherwise Happy 37th Birthday Commodore 64! https://twitter.com/PaulieHughes/status ... 8241589249

JeffA
Posts: 173
Joined: Wed May 16, 2018 7:59 pm

Re: The Good/Bad Old Days

#18 Post by JeffA »

zoli62 wrote: Sat Jan 12, 2019 1:52 am Someone still remember Fortran? I met him at university. Otherwise Happy 37th Birthday Commodore 64! https://twitter.com/PaulieHughes/status ... 8241589249
I remember typing Fortran programs on punch cards and then taking them to the huge air-conditioned computer room. It seems the computer took up pretty much the whole floor, and computer time was pretty dear, made worse by the fact that most of my programs seemed to turn out to be infinite loops taking up eons of computer time and spitting out miles of paper.

User avatar
gimcrack
Posts: 251
Joined: Fri Dec 02, 2011 6:17 pm

Re: The Good/Bad Old Days

#19 Post by gimcrack »

Gordon Cooper wrote: Sun Dec 23, 2018 12:33 am I met punched paper tape
Now I don't feel so old. Dot Matrix Paper is about a far as I go. I remember typing out a game code out of Ahoy! magazine for the Commodore 64. But I had a earlier PC before hand and that was the Texas Instruments TI-99/4A with the Dot Matrix Paper printer.

User avatar
Eadwine Rose
Administrator
Posts: 11899
Joined: Wed Jul 12, 2006 2:10 am

Re: The Good/Bad Old Days

#20 Post by Eadwine Rose »

Oh man.. typing out a game...

My dad transformed an old calculator (the kind with the roll of paper!) so I could enter the data lines with one keypress and then I could use the numeric keys for the numbers.

And then the thing wouldn't run and you'd have to wait for the next edition to get the errors out. GAH!! But the satisfaction when stuff finally WORKED.. heaven!
MX-23.2_x64 July 31 2023 * 6.1.0-18-amd64 ext4 Xfce 4.18.1 * 8core AMD Ryzen 7 2700
Asus TUF B450-Plus Gaming UEFI * Asus GTX 1050 Ti Nvidia 525.147.05 * 2x16Gb DDR4 2666 Kingston HyperX Predator
Samsung 860EVO * Samsung S24D330 & P2250 * HP Envy 5030

Post Reply

Return to “Community Fun”