Welcome!
Forum users
  • Please read this before asking for help, and don't forget to add Quick System Info to help requests!
  • Please follow the Forum Rules

Current releases
--MX-21 release info here
--Migration information to MX-21 here
--antiX-19.4 (Grup Yorum) release info here

Important information
-- Spectre and Meltdown vulnerabilities

News
-- MX Linux on social media: here
-- New Forum Features, Marking Solved and Referencing a User: here

MX-21 RC1 feedback (Xfce)

Message
Author
User avatar
fehlix
Developer
Posts: 9221
Joined: Wed Apr 11, 2018 5:09 pm

Re: MX-21 RC1 feedback (Xfce)

#171 Post by fehlix »

hebelwirkung wrote: Wed Oct 13, 2021 9:29 am One small thing though - for the second time in a few days, my keyboard layout has set itself back from German, which I usually use, to English (US) which is what I use for my system defaults. First time this happened was overnight when I wasn't at the computer. Just now, it occurred while I was working. I had to reset it manually and reboot. German layout is active again, but oddly enough, when I checked after rebooting, the keyboard layout option for English (US), formerly displayed, has now vanished from the display. It's still in the drop down list but I'm not going to set it as an option again for now.
Not really clear to me what this is about. Is keyboard different after login? From what display has it vanished?
System wide keyboard layout definition are different to user-session defined one and are applied depending on user-keyboard settings...
+++EDIT+++ ... and depends on whether autologin is enabled, b/c at login screen the default keyboard pre-selected would be the 1st layout from system-wide defined keyboard layouts...
Gigabyte Z77M-D3H, Intel Xeon E3-1240 V2 (Quad core), 32GB RAM,
GeForce GTX 770, Samsung SSD 850 EVO 500GB, Seagate Barracuda 4TB

User avatar
hebelwirkung
Posts: 14
Joined: Wed Jun 10, 2020 2:54 pm

Re: MX-21 RC1 feedback (Xfce)

#172 Post by hebelwirkung »

fehlix wrote: Wed Oct 13, 2021 3:04 pm
hebelwirkung wrote: Wed Oct 13, 2021 9:29 am One small thing though - for the second time in a few days, my keyboard layout has set itself back from German, which I usually use, to English (US) which is what I use for my system defaults. First time this happened was overnight when I wasn't at the computer. Just now, it occurred while I was working. I had to reset it manually and reboot. German layout is active again, but oddly enough, when I checked after rebooting, the keyboard layout option for English (US), formerly displayed, has now vanished from the display. It's still in the drop down list but I'm not going to set it as an option again for now.
Not really clear to me what this is about. Is keyboard different after login? From what display has it vanished?
System wide keyboard layout definition are different to user-session defined one and are applied depending on user-keyboard settings...
+++EDIT+++ ... and depends on whether autologin is enabled, b/c at login screen the default keyboard pre-selected would be the 1st layout from system-wide defined keyboard layouts...
Login on this machine requires password. The keyboard layout I have set (German in my case) is the one I unfailingly get after I've logged in, which is as it should be. Expected behavior would be for this layout to be maintained throughout the session.

Twice, however, in mid-session the layout changed from the top one in my list of active layouts to the second one (in my case, English US) without my doing anything to prompt that.

User avatar
fehlix
Developer
Posts: 9221
Joined: Wed Apr 11, 2018 5:09 pm

Re: MX-21 RC1 feedback (Xfce)

#173 Post by fehlix »

hebelwirkung wrote: Wed Oct 13, 2021 4:07 pm
fehlix wrote: Wed Oct 13, 2021 3:04 pm
hebelwirkung wrote: Wed Oct 13, 2021 9:29 am One small thing though - for the second time in a few days, my keyboard layout has set itself back from German, which I usually use, to English (US) which is what I use for my system defaults. First time this happened was overnight when I wasn't at the computer. Just now, it occurred while I was working. I had to reset it manually and reboot. German layout is active again, but oddly enough, when I checked after rebooting, the keyboard layout option for English (US), formerly displayed, has now vanished from the display. It's still in the drop down list but I'm not going to set it as an option again for now.
Not really clear to me what this is about. Is keyboard different after login? From what display has it vanished?
System wide keyboard layout definition are different to user-session defined one and are applied depending on user-keyboard settings...
+++EDIT+++ ... and depends on whether autologin is enabled, b/c at login screen the default keyboard pre-selected would be the 1st layout from system-wide defined keyboard layouts...
Login on this machine requires password. The keyboard layout I have set (German in my case) is the one I unfailingly get after I've logged in, which is as it should be. Expected behavior would be for this layout to be maintained throughout the session.

Twice, however, in mid-session the layout changed from the top one in my list of active layouts to the second one (in my case, English US) without my doing anything to prompt that.
OK, let's have look. Please run these commands within terminal and post command and text output:

Code: Select all

cat /etc/default/keyboard
and

Code: Select all

setxkbmap -query
and

Code: Select all

grep  XkbDisable ~/.config/xfce4/xfconf/xfce-perchannel-xml/keyboard-layout.xml
Gigabyte Z77M-D3H, Intel Xeon E3-1240 V2 (Quad core), 32GB RAM,
GeForce GTX 770, Samsung SSD 850 EVO 500GB, Seagate Barracuda 4TB

User avatar
Slayhill
Posts: 1
Joined: Sat Nov 14, 2020 9:21 pm

Re: MX-21 RC1 feedback (Xfce)

#174 Post by Slayhill »

Been using MX21 RC1 since it was released and all of the bugs I noticed in the beginning have already been corrected. I'm not a power user but MX is my daily driver. The only issue that I am still experiencing is the behavior of the suspend power mode. I have the power manager set to suspend when laptop lid is closed. But when I do that I am unable to log back in after waking the system up. When I enter my password and hit Unlock the screen goes blank. No mouse cursor or anything. Ctrl+Alt+Delete gets me back to the login screen but when I try again, same result. The only way to get out of it is to restart. If I select suspend from the shutdown menu it works fine. Only happens when I shut the lid while running.

Code: Select all

System:    Host: <filter> Kernel: 5.10.0-9-amd64 x86_64 bits: 64 compiler: N/A 
           parameters: BOOT_IMAGE=/boot/vmlinuz-5.10.0-9-amd64 
           root=UUID=<filter> ro quiet splash 
           Desktop: Xfce 4.16.0 tk: Gtk 3.24.24 info: xfce4-panel wm: xfwm4 dm: LightDM 1.26.0 
           Distro: MX-21_rc1_x64 Wildflower October 5  2021 base: Debian GNU/Linux 11 (bullseye) 
Machine:   Type: Portable System: Dell product: Inspiron 1764 v: A13 serial: <filter> 
           Mobo: Dell model: 0TKV96 v: A13 serial: <filter> BIOS: Dell v: A13 date: 03/29/2011 
Battery:   ID-1: BAT0 charge: 3.0 Wh condition: 3.0/4.4 Wh (68%) volts: 12.3/11.1 
           model: SIMPLO Dell type: Li-ion serial: <filter> status: Full 
CPU:       Topology: Dual Core model: Intel Core i5 M 430 bits: 64 type: MT MCP arch: Nehalem 
           family: 6 model-id: 25 (37) stepping: 2 microcode: 11 L2 cache: 3072 KiB 
           flags: lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 18088 
           Speed: 1333 MHz min/max: 1199/2267 MHz boost: enabled Core speeds (MHz): 1: 1299 
           2: 1316 3: 1299 4: 1366 
           Vulnerabilities: Type: itlb_multihit status: KVM: VMX disabled 
           Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT vulnerable 
           Type: mds 
           status: Vulnerable: Clear CPU buffers attempted, no microcode; SMT vulnerable 
           Type: meltdown mitigation: PTI 
           Type: spec_store_bypass 
           mitigation: Speculative Store Bypass disabled via prctl and seccomp 
           Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization 
           Type: spectre_v2 mitigation: Full generic retpoline, IBPB: conditional, IBRS_FW, 
           STIBP: conditional, RSB filling 
           Type: srbds status: Not affected 
           Type: tsx_async_abort status: Not affected 
Graphics:  Device-1: Intel Core Processor Integrated Graphics vendor: Dell driver: i915 
           v: kernel bus ID: 00:02.0 chip ID: 8086:0046 
           Display: x11 server: X.Org 1.20.11 driver: intel resolution: 1600x900~60Hz 
           OpenGL: renderer: Mesa DRI Intel HD Graphics (ILK) v: 2.1 Mesa 20.3.5 
           direct render: Yes 
Audio:     Device-1: Intel 5 Series/3400 Series High Definition Audio vendor: Dell 
           driver: snd_hda_intel v: kernel bus ID: 00:1b.0 chip ID: 8086:3b56 
           Sound Server: ALSA v: k5.10.0-9-amd64 
Network:   Device-1: Broadcom and subsidiaries BCM43224 802.11a/b/g/n 
           vendor: Dell Wireless 1520 Half-size Mini PCIe Card driver: wl v: kernel port: 1840 
           bus ID: 03:00.0 chip ID: 14e4:4353 
           IF: wlan0 state: up mac: <filter> 
           Device-2: Realtek RTL810xE PCI Express Fast Ethernet vendor: Dell driver: r8169 
           v: kernel port: 2000 bus ID: 04:00.0 chip ID: 10ec:8136 
           IF: eth0 state: down mac: <filter> 
Drives:    Local Storage: total: 465.76 GiB used: 8.24 GiB (1.8%) 
           ID-1: /dev/sda vendor: Crucial model: CT500MX500SSD1 size: 465.76 GiB block size: 
           physical: 4096 B logical: 512 B speed: 3.0 Gb/s serial: <filter> rev: 023 scheme: MBR 
Partition: ID-1: / raw size: 457.75 GiB size: 449.50 GiB (98.20%) used: 8.24 GiB (1.8%) fs: ext4 
           dev: /dev/sda1 
           ID-2: swap-1 size: 8.00 GiB used: 0 KiB (0.0%) fs: swap swappiness: 15 (default 60) 
           cache pressure: 100 (default) dev: /dev/sda2 
Sensors:   System Temperatures: cpu: 44.0 C mobo: 0.0 C 
           Fan Speeds (RPM): cpu: 3227 
Repos:     No active apt repos in: /etc/apt/sources.list 
           Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list 
           1: deb http://deb.debian.org/debian bullseye-updates main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/debian.list 
           1: deb http://deb.debian.org/debian bullseye main contrib non-free
           2: deb http://security.debian.org/debian-security bullseye-security main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/google-chrome.list 
           1: deb [arch=amd64] http://dl.google.com/linux/chrome/deb/ stable main
           No active apt repos in: /etc/apt/sources.list.d/microsoft-edge-beta.list 
           Active apt repos in: /etc/apt/sources.list.d/mx.list 
           1: deb https://mirror.genesisadaptive.com/mxlinux/mx/repo/ bullseye main non-free
           Active apt repos in: /etc/apt/sources.list.d/teamviewer.list 
           1: deb https://linux.teamviewer.com/deb stable main
Info:      Processes: 295 Uptime: 13m Memory: 7.57 GiB used: 924.7 MiB (11.9%) Init: SysVinit 
           v: 2.96 runlevel: 5 default: 5 Compilers: gcc: 10.2.1 alt: 10 Shell: quick-system-in 
           running in: quick-system-in inxi: 3.0.36 

User avatar
hebelwirkung
Posts: 14
Joined: Wed Jun 10, 2020 2:54 pm

Re: MX-21 RC1 feedback (Xfce)

#175 Post by hebelwirkung »

fehlix wrote: Wed Oct 13, 2021 4:23 pm
hebelwirkung wrote: Wed Oct 13, 2021 4:07 pm
fehlix wrote: Wed Oct 13, 2021 3:04 pm
Not really clear to me what this is about. Is keyboard different after login? From what display has it vanished?
System wide keyboard layout definition are different to user-session defined one and are applied depending on user-keyboard settings...
+++EDIT+++ ... and depends on whether autologin is enabled, b/c at login screen the default keyboard pre-selected would be the 1st layout from system-wide defined keyboard layouts...
Login on this machine requires password. The keyboard layout I have set (German in my case) is the one I unfailingly get after I've logged in, which is as it should be. Expected behavior would be for this layout to be maintained throughout the session.

Twice, however, in mid-session the layout changed from the top one in my list of active layouts to the second one (in my case, English US) without my doing anything to prompt that.
OK, let's have look. Please run these commands within terminal and post command and text output:

Code: Select all

cat /etc/default/keyboard
and

Code: Select all

setxkbmap -query
and

Code: Select all

grep  XkbDisable ~/.config/xfce4/xfconf/xfce-perchannel-xml/keyboard-layout.xml
Okay, here's the output:

$ cat /etc/default/keyboard
# KEYBOARD CONFIGURATION FILE

# Consult the keyboard(5) manual page.

XKBMODEL="pc105"
XKBLAYOUT="de,us"
XKBVARIANT=","
XKBOPTIONS="terminate:ctrl_alt_bksp,grp_led:scroll,grp:rctrl_rshift_toggle"

BACKSPACE="guess"



$ setxkbmap -query
rules: evdev
model: pc105
layout: de
options: terminate:ctrl_alt_bksp



$ grep XkbDisable ~/.config/xfce4/xfconf/xfce-perchannel-xml/keyboard-layout.xml
<property name="XkbDisable" type="bool" value="false"/>

jbernardo
Posts: 42
Joined: Sat Apr 30, 2016 5:27 am

Re: MX-21 RC1 feedback (Xfce)

#176 Post by jbernardo »

Hello,
I have Xiaomi EBs Basic 2 earplugs. On 19.4, they work well. On 21RC1, they pair, but bluez only (tries to) connect to the serial port profile, and ignores the audio. I first noticed it on AHS, but it also happens on "normal" XFCE.
First machine, with AHS:

Code: Select all

System:    Host: <filter> Kernel: 5.10.0-9-amd64 x86_64 bits: 64 compiler: N/A 
           parameters: BOOT_IMAGE=/boot/vmlinuz-5.10.0-9-amd64 
           root=UUID=<filter> ro quiet splash 
           Desktop: Xfce 4.16.0 tk: Gtk 3.24.24 info: xfce4-panel wm: xfwm4 dm: LightDM 1.26.0 
           Distro: MX-21_rc1_x64 Wildflower October 5  2021 base: Debian GNU/Linux 11 (bullseye) 
Machine:   Type: Laptop System: CHUWIInnovationAnd(ShenZhen) product: GemiBook Pro v: N/A 
           serial: <filter> 
           Mobo: N/A model: N/A serial: <filter> UEFI: American Megatrends 
           v: JXX-BI-14.1-W133GWR300-058-D date: 03/12/2021 
Battery:   ID-1: BAT0 charge: 38.0 Wh condition: 38.0/38.0 Wh (100%) volts: 8.7/N/A model: N/A 
           type: Unknown serial: <filter> status: Charging 
CPU:       Topology: Quad Core model: Intel Celeron J4125 bits: 64 type: MCP arch: Goldmont Plus 
           family: 6 model-id: 7A (122) stepping: 8 microcode: 1A L2 cache: 4096 KiB 
           flags: lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 15974 
           Speed: 1134 MHz min/max: 800/2700 MHz Core speeds (MHz): 1: 1422 2: 1550 3: 1462 
           4: 1522 
           Vulnerabilities: Type: itlb_multihit status: Not affected 
           Type: l1tf status: Not affected 
           Type: mds status: Not affected 
           Type: meltdown status: Not affected 
           Type: spec_store_bypass 
           mitigation: Speculative Store Bypass disabled via prctl and seccomp 
           Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization 
           Type: spectre_v2 mitigation: Enhanced IBRS, IBPB: conditional, RSB filling 
           Type: srbds status: Not affected 
           Type: tsx_async_abort status: Not affected 
Graphics:  Device-1: Intel GeminiLake [UHD Graphics 600] driver: i915 v: kernel bus ID: 00:02.0 
           chip ID: 8086:3185 
           Display: x11 server: X.Org 1.20.13 driver: modesetting unloaded: fbdev,vesa 
           resolution: 2160x1440~60Hz 
           OpenGL: renderer: Mesa Intel UHD Graphics 600 (GLK 2) v: 4.6 Mesa 21.2.2 
           direct render: Yes 
Audio:     Device-1: Intel Celeron/Pentium Silver Processor High Definition Audio 
           driver: snd_hda_intel v: kernel bus ID: 00:0e.0 chip ID: 8086:3198 
           Sound Server: ALSA v: k5.10.0-9-amd64 
Network:   Device-1: Intel Wi-Fi 6 AX200 driver: iwlwifi v: kernel port: f040 bus ID: 01:00.0 
           chip ID: 8086:2723 
           IF: wlan0 state: up mac: <filter> 
           Device-2: Realtek RTL8153 Gigabit Ethernet Adapter type: USB driver: r8152 
           bus ID: 2-1.3:5 chip ID: 0bda:8153 serial: <filter> 
           IF: eth0 state: down mac: <filter> 
           IF-ID-1: tun0 state: unknown speed: 10 Mbps duplex: full mac: N/A 
Drives:    Local Storage: total: 704.24 GiB used: 259.53 GiB (36.9%) 
           ID-1: /dev/sda vendor: Western Digital model: WDS500G2B0B-00YS70 size: 465.76 GiB 
           block size: physical: 512 B logical: 512 B speed: 6.0 Gb/s serial: <filter> rev: 30WD 
           scheme: GPT 
           ID-2: /dev/sdb vendor: Netac model: SSD 256GB size: 238.47 GiB block size: 
           physical: 512 B logical: 512 B speed: 6.0 Gb/s serial: <filter> rev: 0A0 scheme: GPT 
Partition: ID-1: / raw size: 29.32 GiB size: 28.69 GiB (97.85%) used: 12.16 GiB (42.4%) fs: ext4 
           dev: /dev/sda5 
           ID-2: /home raw size: 292.54 GiB size: 286.95 GiB (98.09%) used: 247.18 GiB (86.1%) 
           fs: ext4 dev: /dev/sda7 
           ID-3: swap-1 size: 9.01 GiB used: 132.8 MiB (1.4%) fs: swap 
           swappiness: 15 (default 60) cache pressure: 100 (default) dev: /dev/sda8 
Sensors:   System Temperatures: cpu: 54.0 C mobo: N/A 
           Fan Speeds (RPM): N/A 
Repos:     No active apt repos in: /etc/apt/sources.list 
           Active apt repos in: /etc/apt/sources.list.d/brave-browser-release.list 
           1: deb [arch=amd64] https://brave-browser-apt-release.s3.brave.com/ bullseye main
           Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list 
           1: deb http://deb.debian.org/debian bullseye-updates main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/debian.list 
           1: deb http://deb.debian.org/debian bullseye main contrib non-free
           2: deb http://security.debian.org/debian-security bullseye-security main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/google-chrome.list 
           1: deb [arch=amd64] http://dl.google.com/linux/chrome/deb/ stable main
           Active apt repos in: /etc/apt/sources.list.d/mx.list 
           1: deb http://nl.mxrepo.com/mx/repo/ bullseye main non-free
           2: deb http://nl.mxrepo.com/mx/repo/ bullseye ahs
           Active apt repos in: /etc/apt/sources.list.d/signal-xenial-added-by-mxpi.list 
           1: deb [arch=amd64] https://updates.signal.org/desktop/apt xenial main
           Active apt repos in: /etc/apt/sources.list.d/skype-stable.list 
           1: deb [arch=amd64] https://repo.skype.com/deb stable main
           Active apt repos in: /etc/apt/sources.list.d/teams.list 
           1: deb [arch=amd64] https://packages.microsoft.com/repos/ms-teams stable main
           Active apt repos in: /etc/apt/sources.list.d/vscode.list 
           1: deb [arch=amd64] https://packages.microsoft.com/repos/vscode stable main
Info:      Processes: 309 Uptime: 19h 31m Memory: 11.51 GiB used: 4.78 GiB (41.5%) 
           Init: SysVinit v: 2.96 runlevel: 5 default: 5 Compilers: gcc: 10.2.1 alt: 10 
           Shell: quick-system-in running in: quick-system-in inxi: 3.0.36 
Second machine, RC1-XFCE:

Code: Select all

System:    Host: <filter> Kernel: 5.10.0-9-amd64 x86_64 bits: 64 compiler: N/A 
           parameters: BOOT_IMAGE=/boot/vmlinuz-5.10.0-9-amd64 
           root=UUID=<filter> ro quiet splash 
           Desktop: Xfce 4.16.0 tk: Gtk 3.24.24 info: xfce4-panel wm: xfwm4 dm: LightDM 1.26.0 
           Distro: MX-21_rc1_x64 Wildflower October 5  2021 base: Debian GNU/Linux 11 (bullseye) 
Machine:   Type: Laptop System: FUJITSU product: LIFEBOOK E544 v: 10601736654 serial: <filter> 
           Chassis: type: 10 v: LIFEBOOK E544 serial: <filter> 
           Mobo: FUJITSU model: FJNB281 v: F2 serial: <filter> UEFI [Legacy]: FUJITSU // Phoenix 
           v: Version 1.06 date: 03/12/2015 
Battery:   ID-1: CMB1 charge: 32.0 Wh condition: 32.0/48.6 Wh (66%) volts: 12.2/10.8 
           model: Fujitsu CP671396-01 type: Li-ion serial: <filter> status: Full 
CPU:       Topology: Dual Core model: Intel Core i3-4000M bits: 64 type: MT MCP arch: Haswell 
           family: 6 model-id: 3C (60) stepping: 3 microcode: 28 L2 cache: 3072 KiB 
           flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 19156 
           Speed: 889 MHz min/max: 800/2400 MHz Core speeds (MHz): 1: 798 2: 799 3: 823 4: 802 
           Vulnerabilities: Type: itlb_multihit status: KVM: VMX disabled 
           Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT vulnerable 
           Type: mds mitigation: Clear CPU buffers; SMT vulnerable 
           Type: meltdown mitigation: PTI 
           Type: spec_store_bypass 
           mitigation: Speculative Store Bypass disabled via prctl and seccomp 
           Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization 
           Type: spectre_v2 mitigation: Full generic retpoline, IBPB: conditional, IBRS_FW, 
           STIBP: conditional, RSB filling 
           Type: srbds mitigation: Microcode 
           Type: tsx_async_abort status: Not affected 
Graphics:  Device-1: Intel 4th Gen Core Processor Integrated Graphics vendor: Fujitsu Limited. 
           driver: i915 v: kernel bus ID: 00:02.0 chip ID: 8086:0416 
           Display: x11 server: X.Org 1.20.11 driver: modesetting unloaded: fbdev,vesa 
           resolution: 1366x768~60Hz 
           OpenGL: renderer: Mesa DRI Intel HD Graphics 4600 (HSW GT2) v: 4.5 Mesa 20.3.5 
           compat-v: 3.0 direct render: Yes 
Audio:     Device-1: Intel Xeon E3-1200 v3/4th Gen Core Processor HD Audio 
           vendor: Fujitsu Limited. driver: snd_hda_intel v: kernel bus ID: 00:03.0 
           chip ID: 8086:0c0c 
           Device-2: Intel 8 Series/C220 Series High Definition Audio vendor: Fujitsu Limited. 
           driver: snd_hda_intel v: kernel bus ID: 00:1b.0 chip ID: 8086:8c20 
           Sound Server: ALSA v: k5.10.0-9-amd64 
Network:   Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet 
           vendor: Fujitsu Limited. driver: r8169 v: kernel port: 3000 bus ID: 02:00.0 
           chip ID: 10ec:8168 
           IF: eth0 state: down mac: <filter> 
           Device-2: Intel Wireless 7260 driver: iwlwifi v: kernel port: 3000 bus ID: 03:00.0 
           chip ID: 8086:08b1 
           IF: wlan0 state: up mac: <filter> 
Drives:    Local Storage: total: 119.24 GiB used: 79.06 GiB (66.3%) 
           ID-1: /dev/sda vendor: Samsung model: MZ7TE128HMGR-00004 size: 119.24 GiB block size: 
           physical: 512 B logical: 512 B speed: 6.0 Gb/s serial: <filter> rev: 300Q scheme: MBR 
Partition: ID-1: / raw size: 17.93 GiB size: 17.48 GiB (97.49%) used: 6.57 GiB (37.6%) fs: ext4 
           dev: /dev/sda1 
           ID-2: /home raw size: 95.28 GiB size: 93.66 GiB (98.30%) used: 72.50 GiB (77.4%) 
           fs: ext4 dev: /dev/sda3 
           ID-3: swap-1 size: 2.00 GiB used: 0 KiB (0.0%) fs: swap swappiness: 15 (default 60) 
           cache pressure: 100 (default) dev: /dev/sda4 
           ID-4: swap-2 size: 4.03 GiB used: 0 KiB (0.0%) fs: swap swappiness: 15 (default 60) 
           cache pressure: 100 (default) dev: /dev/sda2 
Sensors:   System Temperatures: cpu: 51.0 C mobo: N/A 
           Fan Speeds (RPM): N/A 
Repos:     No active apt repos in: /etc/apt/sources.list 
           Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list 
           1: deb http://deb.debian.org/debian bullseye-updates main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/debian.list 
           1: deb http://deb.debian.org/debian bullseye main contrib non-free
           2: deb http://security.debian.org/debian-security bullseye-security main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/mx.list 
           1: deb http://nl.mxrepo.com/mx/repo/ bullseye main non-free
Info:      Processes: 213 Uptime: 8m Memory: 7.67 GiB used: 625.0 MiB (8.0%) Init: SysVinit 
           v: 2.96 runlevel: 5 default: 5 Compilers: gcc: 10.2.1 alt: 10 Shell: quick-system-in 
           running in: quick-system-in inxi: 3.0.36 
Device info from blueman:

Code: Select all

20:1B:88:04:D8:68
public
Mi True Wireless EBs Basic 2
Mi True Wireless EBs Basic 2
0x240418
0x0000
audio-card
yes
no
no
no
no
00001101-0000-1000-8000-00805f9b34fb Serial Port
00001108-0000-1000-8000-00805f9b34fb Headset
0000110b-0000-1000-8000-00805f9b34fb Audio Sink
0000110c-0000-1000-8000-00805f9b34fb Remote Control Target
0000110e-0000-1000-8000-00805f9b34fb Remote Control
0000111e-0000-1000-8000-00805f9b34fb Handsfree
00001200-0000-1000-8000-00805f9b34fb PnP Information
bluetooth:v005Dp223Bd0100
/org/bluez/hci0
This headset still works (and doesn't have the "Serial Port" profile):

Code: Select all

5C:FB:7C:0B:ED:2C
public
JBL TUNE600BTNC
JBL TUNE600BTNC
0x240404
0x0000
audio-card
yes
no
no
no
no
00001108-0000-1000-8000-00805f9b34fb Headset
0000110b-0000-1000-8000-00805f9b34fb Audio Sink
0000110c-0000-1000-8000-00805f9b34fb Remote Control Target
0000110e-0000-1000-8000-00805f9b34fb Remote Control
0000111e-0000-1000-8000-00805f9b34fb Handsfree
/org/bluez/hci0
As I wrote, both work well on 19.4, on different machines.

User avatar
fehlix
Developer
Posts: 9221
Joined: Wed Apr 11, 2018 5:09 pm

Re: MX-21 RC1 feedback (Xfce)

#177 Post by fehlix »

hebelwirkung wrote: Thu Oct 14, 2021 1:51 am $ grep XkbDisable ~/.config/xfce4/xfconf/xfce-perchannel-xml/keyboard-layout.xml
<property name="XkbDisable" type="bool" value="false"/>
OK, this tells us, you disabled system-layout within (user) Keyboard Settings
and with MX-21 Xfce the only one keyboard which is selected at the login screen
will be made active/available by some dbus-calls during login.
Not sure why it resets itself during a session, seems somehow related to dbus.
If you want to avoid this effect, I guess if you set back to use "System keyboard" it shall stay with the select layout.
Gigabyte Z77M-D3H, Intel Xeon E3-1240 V2 (Quad core), 32GB RAM,
GeForce GTX 770, Samsung SSD 850 EVO 500GB, Seagate Barracuda 4TB

User avatar
hebelwirkung
Posts: 14
Joined: Wed Jun 10, 2020 2:54 pm

Re: MX-21 RC1 feedback (Xfce)

#178 Post by hebelwirkung »

fehlix wrote: Thu Oct 14, 2021 5:48 am
hebelwirkung wrote: Thu Oct 14, 2021 1:51 am $ grep XkbDisable ~/.config/xfce4/xfconf/xfce-perchannel-xml/keyboard-layout.xml
<property name="XkbDisable" type="bool" value="false"/>
OK, this tells us, you disabled system-layout within (user) Keyboard Settings
and with MX-21 Xfce the only one keyboard which is selected at the login screen
will be made active/available by some dbus-calls during login.
Not sure why it resets itself during a session, seems somehow related to dbus.
If you want to avoid this effect, I guess if you set back to use "System keyboard" it shall stay with the select layout.
Yes, I'd actually disabled the system defaults setting, but only after the second time the keyboard hat reset itself. I've now re-enabled it which, after a reboot, brought back the English US option as the second one, with German, as intended, on top. Thanks for looking at this. If it continues to act up, I'll report :-)

SwampRabbit
Developer
Posts: 3704
Joined: Tue Jun 14, 2016 2:02 pm

Re: MX-21 RC1 feedback (Xfce)

#179 Post by SwampRabbit »

@entropyfoe and @fladd when you update next time, please take a moment to look around, a change was specifically done to address an item you both provided feedback on.

I won’t spoil the surprise, if you don’t find it, your not testing enough or properly. :p

Edie: that last part is a joke if the smiley didn't give it away, added clarity to keep Eadwine Rose off my back! :footinmouth:
Last edited by SwampRabbit on Fri Oct 15, 2021 9:09 am, edited 1 time in total.
NEW USERS START HERE FAQS, MX Manual, and How to Break Your System - Don't use Ubuntu PPAs! Always post your Quick System Info (QSI) when asking for help.

User avatar
Eadwine Rose
Administrator
Posts: 13440
Joined: Wed Jul 12, 2006 2:10 am

Re: MX-21 RC1 feedback (Xfce)

#180 Post by Eadwine Rose »

SwampRabbit wrote: Fri Oct 15, 2021 8:55 am if you don’t find it, your not testing enough or properly. :p
If you said that to me I would say something like bye.

Please be careful in your wordings, you're chasing them off ;)
MX-19.4_x64 Oct 21 2019 * 4.19.0-6-amd64 ext4 Xfce 4.14.2 * 8-core AMD Ryzen 7 2700
Asus TUF B450-Plus Gaming UEFI * Asus GTX 1050 Ti Nvidia 418.211.00 * 2x16Gb DDR4 2666 Kingston HyperX Predator
Samsung 860EVO * Samsung S24D330 & P2250 * HP Envy 5030

Locked

Return to “General”