Welcome!
Important information
-- Spectre and Meltdown vulnerabilities
-- Change in MX sources

News
-- MX Linux on social media: here
-- Mepis support still here

Current releases
-- MX-17.1 Final release info here
-- antiX-17 release info here

New users
-- Please read this first, and don't forget to add system and hardware information to posts!
-- Here are the Forum Rules

ARM testing and debugger data for pinxi please!

Post Reply
Message
Author
User avatar
h2-1
Forum Regular
Forum Regular
Posts: 411
Joined: Sat Nov 15, 2008 3:16 pm

ARM testing and debugger data for pinxi please!

#1 Post by h2-1 » Fri Jun 15, 2018 9:06 pm

I'm trying to get decent ARM device support, but so far I only have access to an OrangePi one (via SSH), so I'm not sure how rasberrypi, odroid, other pi's, pine, etc, support is.

If anyone has an ARM based machine or device of any type, I'd greatly appreciate seeing, simplest, the latest pinxi output:

Code: Select all

cd /usr/local/bin && wget smxi.org/pinxi && chmod +x pinxi
# OR 
pinxi -U
All the latest ARM fixes are in the latest pinxi version. there were several bugs in older versions with the debugger data collector for ARM, and there was no actual support for -ANG items at all for ARM.

If you can show: pinxi -zv8
and provide pinxi --debug 22 for any ARM device other than orange pi one I'd appreciate it, I'd like to do inxi 3.0.13 soon, but I'm hampered by only having had access to a single arm device, which isn't very reliable since the syntax and methods vary significantly type to type.

For MX/AntiX users, there's also a new feature, -Sxxx, which should show the system base for the distro as base: if it can find it.

I only need to see one dataset per device, so any one that you might have is almost certain to be helpful.

thanks for looking, I'm hoping at least one or two people here have an arm device lying around, I wish I had a few, but I don't.

Sample Orange Pi:

Code: Select all

pinxi -Fxxxzy80
System:
  Host: orangepione Kernel: 4.14.18-sunxi armv7l bits: 32 compiler: gcc 
  v: 7.2.1 Console: tty 0 dm: N/A Distro: Armbian GNU/Linux 9 (stretch) 
Machine:
  Type: ARM Device System: Xunlong Orange Pi One 
  details: Allwinner sun8i Family rev: N/A serial: <filter> 
CPU:
  Topology: Quad Core model: ARMv7 v7l variant: cortex-a7 bits: 32 type: MCP 
  arch: v7l rev: 5 
  features: Use -f option to see features bogomips: 228 
  Speed: 1200 MHz min/max: 408/1200 MHz Core speeds (MHz): 1: 1200 2: 1200 
  3: 1200 4: 1200 
Graphics:
  Card-1: sun8i-h3-mali driver: N/A bus ID: N/A chip ID: allwinner:1c40000 
  Card-2: sun8i-h3-dw-hdmi driver: sun8i_dw_hdmi v: kernel bus ID: N/A 
  chip ID: allwinner:1ee0000 
  Display: server: No display server data found. Headless server? tty: 126x52 
  Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:
  Card-1: sun8i-h3-dw-hdmi driver: sun8i_dw_hdmi v: kernel bus ID: N/A 
  chip ID: allwinner:1ee0000 
  Sound Server: ALSA v: k4.14.18-sunxi 
Network:
  Card-1: sun8i-h3-emac driver: dwmac_sun8i v: N/A port: N/A bus ID: N/A 
  chip ID: allwinner:1c30000 
  IF: eth0 state: up speed: 100 Mbps duplex: full mac: <filter> 
Drives:
  HDD Total Size: 14.46 GiB used: 1.13 GiB (7.8%) 
  ID-1: /dev/mmcblk0 vendor: SanDisk model: SL16G size: 14.46 GiB 
  serial: <filter> scheme: MBR 
Partition:
  ID-1: / size: 14.06 GiB used: 1.13 GiB (8.0%) fs: ext4 dev: /dev/mmcblk0p1 
Sensors:
  System Temperatures: cpu: 33.9 C mobo: N/A 
  Fan Speeds (RPM): N/A 
Info:
  Processes: 97 Uptime: 18d 7h 18m Memory: 493.3 MiB used: 97.1 MiB (19.7%) 
  Init: systemd v: 232 runlevel: 5 Compilers: gcc: 6.3.0 alt: 6 Shell: bash 
  v: 4.4.12 running in: tty 0 (SSH) pinxi: 3.0.12-23
smxi/sgfxi site (manuals, how-to's, faqs) :: script forums :: Check out inxi sys info script!

bigbenaugust
Forum Novice
Forum  Novice
Posts: 47
Joined: Wed Dec 20, 2017 10:41 am

Re: ARM testing and debugger data for pinxi please!

#2 Post by bigbenaugust » Mon Jul 23, 2018 2:44 pm

Will this run in Raspbian, or are there MX/AntiX images for the Pi I haven't heard of yet? I can go try it on my Pi 3B tonight.
--Ben

bigbenaugust
Forum Novice
Forum  Novice
Posts: 47
Joined: Wed Dec 20, 2017 10:41 am

Re: ARM testing and debugger data for pinxi please!

#3 Post by bigbenaugust » Mon Jul 23, 2018 10:37 pm

From my RPi 3B... I guess it uploaded the second one, happy debugging!

Code: Select all

root@zacchaeus:/usr/local/bin# ./pinxi -zv8
System:    Host: zacchaeus Kernel: 4.14.56-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 
           Console: tty 0 dm: lightdm 1.18.3 Distro: Raspbian GNU/Linux 9 (stretch) 
Machine:   Type: ARM Device System: Raspberry Pi 3 Model B Rev 1.2 details: BCM2835 rev: a22082 
           serial: <filter> 
Memory:    RAM Report: unknown-error: dmidecode was unable to generate data 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP arch: v7l 
           rev: 4 bogomips: 307 
           Speed: 1200 MHz min/max: 600/1200 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 
           Features: crc32 edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 
           vfpv3 vfpv4 
Error 45: Error opening file: /sys/devices/platform/soc/3f007000.dma/driver/uevent 
Error: Permission denied
readline() on closed filehandle $fh at ./pinxi line 3347.
Error 45: Error opening file: /sys/devices/platform/soc/3f00b840.vchiq/driver/uevent 
Error: Permission denied
readline() on closed filehandle $fh at ./pinxi line 3347.
Error 45: Error opening file: /sys/devices/platform/soc/3f00b880.mailbox/driver/uevent 
Error: Permission denied
readline() on closed filehandle $fh at ./pinxi line 3347.
Error 45: Error opening file: /sys/devices/platform/soc/3f100000.watchdog/driver/uevent 
Error: Permission denied
readline() on closed filehandle $fh at ./pinxi line 3347.
Error 45: Error opening file: /sys/devices/platform/soc/3f101000.cprman/driver/uevent 
Error: Permission denied
readline() on closed filehandle $fh at ./pinxi line 3347.
Error 45: Error opening file: /sys/devices/platform/soc/3f104000.rng/driver/uevent 
Error: Permission denied
readline() on closed filehandle $fh at ./pinxi line 3347.
Error 45: Error opening file: /sys/devices/platform/soc/3f200000.gpio/driver/uevent 
Error: Permission denied
readline() on closed filehandle $fh at ./pinxi line 3347.
Error 45: Error opening file: /sys/devices/platform/soc/3f200000.gpiomem/driver/uevent 
Error: Permission denied
readline() on closed filehandle $fh at ./pinxi line 3347.
Error 45: Error opening file: /sys/devices/platform/soc/3f201000.serial/driver/uevent 
Error: Permission denied
readline() on closed filehandle $fh at ./pinxi line 3347.
Error 45: Error opening file: /sys/devices/platform/soc/3f202000.mmc/driver/uevent 
Error: Permission denied
readline() on closed filehandle $fh at ./pinxi line 3347.
Error 45: Error opening file: /sys/devices/platform/soc/3f212000.thermal/driver/uevent 
Error: Permission denied
readline() on closed filehandle $fh at ./pinxi line 3347.
Error 45: Error opening file: /sys/devices/platform/soc/3f215000.aux/driver/uevent 
Error: Permission denied
readline() on closed filehandle $fh at ./pinxi line 3347.
Error 45: Error opening file: /sys/devices/platform/soc/3f300000.mmc/driver/uevent 
Error: Permission denied
readline() on closed filehandle $fh at ./pinxi line 3347.
Error 45: Error opening file: /sys/devices/platform/soc/3f980000.usb/driver/uevent 
Error: Permission denied
readline() on closed filehandle $fh at ./pinxi line 3347.
Error 45: Error opening file: /sys/devices/platform/soc/soc:arm-pmu/driver/uevent 
Error: Permission denied
readline() on closed filehandle $fh at ./pinxi line 3347.
Error 45: Error opening file: /sys/devices/platform/soc/soc:audio/driver/uevent 
Error: Permission denied
readline() on closed filehandle $fh at ./pinxi line 3347.
Error 45: Error opening file: /sys/devices/platform/soc/soc:expgpio/driver/uevent 
Error: Permission denied
readline() on closed filehandle $fh at ./pinxi line 3347.
Error 45: Error opening file: /sys/devices/platform/soc/soc:fb/driver/uevent 
Error: Permission denied
readline() on closed filehandle $fh at ./pinxi line 3347.
Error 45: Error opening file: /sys/devices/platform/soc/soc:firmware/driver/uevent 
Error: Permission denied
readline() on closed filehandle $fh at ./pinxi line 3347.
Error 45: Error opening file: /sys/devices/platform/soc/soc:power/driver/uevent 
Error: Permission denied
readline() on closed filehandle $fh at ./pinxi line 3347.
Error 45: Error opening file: /sys/devices/platform/soc/soc:vcsm/driver/uevent 
Error: Permission denied
readline() on closed filehandle $fh at ./pinxi line 3347.
Error 45: Error opening file: /sys/devices/platform/soc/soc:virtgpio/driver/uevent 
Error: Permission denied
readline() on closed filehandle $fh at ./pinxi line 3347.
Graphics:  Card-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.19.2 driver: fbturbo tty: 100x28 
           Message: Advanced graphics data unavailable in console for root. 
Audio:     Card-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:soc 
           Sound Server: ALSA v: k4.14.56-v7+ 
Network:   Card-1: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: USB 
           driver: smsc95xx bus ID: 1:3 chip ID: 0424:ec00 
           IF: eth0 state: up speed: 100 Mbps duplex: full mac: <filter> 
           IP v4: <filter> scope: global broadcast: <filter> 
           IP v6: <filter> scope: link 
           IF-ID-1: wlan0 state: down mac: <filter> 
           WAN IP: <filter> 
Drives:    Local Storage: total: 29.81 GiB used: 6.22 GiB (20.9%) 
           ID-1: /dev/mmcblk0 model: 00000 size: 29.81 GiB serial: <filter> scheme: MBR 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / size: 29.24 GiB used: 6.20 GiB (21.2%) fs: ext4 dev: /dev/mmcblk0p2 
           label: rootfs uuid: d4f0fd64-ad9d-4cfd-aa76-8d3541fbf008 
           ID-2: /boot size: 40.9 MiB used: 21.9 MiB (53.7%) fs: vfat dev: /dev/mmcblk0p1 
           label: boot uuid: 0298-4814 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1:1 usb: 2.0 type: Full speed (or root) hub chip ID: 1d6b:0002 
           Hub: 1:2 usb: 2.0 type: Standard Microsystems SMC9514 Hub chip ID: 0424:9514 
           Device-1: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter bus ID: 1:3 
           usb: 2.0 type: Vendor Specific Class chip ID: 0424:ec00 
Sensors:   Missing: Required tool sensors not installed. Check --recommends 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http://raspbian.raspberrypi.org/raspbian/ stretch main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/bl.list 
           1: deb http://pkg.bunsenlabs.org/debian helium main
           2: deb http://pkg.bunsenlabs.org/debian stretch-backports main
           Active apt repos in: /etc/apt/sources.list.d/nodesource.list 
           1: deb https://deb.nodesource.com/node_8.x stretch main
           2: deb-src https://deb.nodesource.com/node_8.x stretch main
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http://archive.raspberrypi.org/debian/ stretch main ui
Processes: CPU top: 5 
           1: cpu: 65.0% command: perl pid: 841 mem: 13.8 MiB (1.4%) 
           2: cpu: 1.5% command: init pid: 1 mem: 5.86 MiB (0.6%) 
           3: cpu: 1.2% command: pi-greeter pid: 662 mem: 40.1 MiB (4.3%) 
           4: cpu: 0.8% command: xorg pid: 451 mem: 31.4 MiB (3.3%) 
           5: cpu: 0.4% command: systemd-journald pid: 91 mem: 4.43 MiB (0.4%) 
           Memory top: 5 
           1: mem: 40.1 MiB (4.3%) command: pi-greeter pid: 662 cpu: 1.2% 
           2: mem: 31.4 MiB (3.3%) command: xorg pid: 451 cpu: 0.8% 
           3: mem: 13.8 MiB (1.4%) command: perl pid: 841 cpu: 65.0% 
           4: mem: 7.32 MiB (0.7%) command: lightdm pid: 650 cpu: 0.0% 
           5: mem: 7.14 MiB (0.7%) command: lightdm pid: 429 cpu: 0.0% 
Info:      Processes: 116 Uptime: 2m Memory: 1003.2 MiB used: 172.7 MiB (17.2%) gpu: 76.0 MiB 
           Init: systemd v: 232 runlevel: 5 target: graphical.target Compilers: gcc: 6.3.0 
           alt: 6 Shell: bash (sudo) v: 4.4.12 running in: tty 0 (SSH) pinxi: 3.0.19-1 
root@zacchaeus:/usr/local/bin# 

Code: Select all

root@zacchaeus:/usr/local/bin# pinxi --debug 22
Starting pinxi debugging data collector...
Data going into:
/root/.pinxi/pinxi-ARM-zacchaeus-2018-07-23_223458-root-3.0.19
----------------------------------------
Collecting audio data...
Collecting dev, label, disk, uuid data, df...
Warning: only some of the data collection can occur if you are not in X
Warning: only some of the data collection can occur if you are running as Root user
Collecting Xorg log and xorg.conf files...
Collecting X, xprop, glxinfo, xrandr, xdpyinfo data, wayland, weston...
Collecting networking data...
Collecting Perl module data (this can take a while)...
Collecting system data...
Collecting system files data...
----------------------------------------
Constructing /sys tree data...
Constructing /sys ls data...
Building /sys file list...
Parsing /sys files...
----------------------------------------
Skipping /proc data collection.
----------------------------------------
Creating pinxi output file now. This can take a few seconds...
Starting pinxi from: /usr/local/bin/
----------------------------------------
Creating tar.gz compressed file of this material...
File: pinxi-ARM-zacchaeus-2018-07-23_223458-root-3.0.19.tar.gz
Removing /root/.pinxi/pinxi-ARM-zacchaeus-2018-07-23_223458-root-3.0.19...
Directory removed.
----------------------------------------
Uploading to: ftp.techpatterns.com/incoming
File to be uploaded:
/root/.pinxi/pinxi-ARM-zacchaeus-2018-07-23_223458-root-3.0.19.tar.gz
Connected to FTP server.
Uploaded file successfully!
Goodbye.
Removing debugger gz file:
/root/.pinxi/pinxi-ARM-zacchaeus-2018-07-23_223458-root-3.0.19.tar.gz
File removed.
Debugger data generation and upload completed. Thank you for your help.
root@zacchaeus:/usr/local/bin# 
--Ben

User avatar
timkb4cq
Forum Veteran
Forum Veteran
Posts: 4343
Joined: Wed Jul 12, 2006 4:05 pm

Re: ARM testing and debugger data for pinxi please!

#4 Post by timkb4cq » Tue Jul 24, 2018 7:28 pm

This is my Samsung Chromebook. Looks like something specific to it.

Code: Select all

(stretch)tim@localhost:~$ pinxi -v8
\System:
  Host: localhost Kernel: 3.8.11 armv7l bits: 32 compiler: gcc v: 4.9.x 
  Desktop: Xfce 4.12.3 tk: Gtk 2.24.30 info: xfce4-panel wm: xfwm4 
  dm: startx Distro: Debian GNU/Linux 9 (stretch) 
Unmatched ( in regex; marked by <-- HERE in m/SAMSUNG EXYNOS5 ( <-- HERE Flattened/ at /usr/local/bin/pinxi line 9452.
MSI 970A-G43 MB, AMD FX-6300 (six core), 16GB RAM, GeForce 730, Samsung 850 EVO 250GB SSD, Seagate Barracuda XT 3TB

User avatar
timkb4cq
Forum Veteran
Forum Veteran
Posts: 4343
Joined: Wed Jul 12, 2006 4:05 pm

Re: ARM testing and debugger data for pinxi please!

#5 Post by timkb4cq » Wed Jul 25, 2018 11:16 am

Raspberry Pi 2

Code: Select all

pi@raspberrypi:~ $ pinxi -zv8     
System:    Host: raspberrypi Kernel: 4.1.19-v7+ armv7l bits: 32 compiler: gcc v: 4.9.3 Console: tty 0 
           dm: lightdm 1.10.3 Distro: Raspbian GNU/Linux 8 (jessie) 
Machine:   Type: ARM Device System: Raspberry Pi 2 Model B Rev 1.1 details: BCM2709 rev: a21041 
           serial: <filter> 
Memory:    RAM Report: permissions: Unable to run dmidecode. Are you root? 
PCI Slots: ARM: No ARM data found for this feature. 
CPU:       Topology: Quad Core model: ARMv7 v7l variant: cortex-a7 bits: 32 type: MCP arch: v7l rev: 5 
           bogomips: 0 
           Speed: 600 MHz min/max: 600/900 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 
           Features: edsp evtstrm fastmult half idiva idivt lpae neon thumb tls vfp vfpd32 vfpv3 vfpv4 
Graphics:  Card-1: bcm2708-fb driver: bcm2708_fb v: kernel bus ID: N/A chip ID: brcm:soc 
           Display: server: X.org 1.17.2 driver: fbturbo tty: 168x47 
           Message: Advanced graphics data unavailable in console. Try -G --display 
Use of uninitialized value $row[6] in concatenation (.) or string at /usr/local/bin/pinxi line 5704.
Audio:     Card-1: bcm2835-audio driver: bcm2835_AUD0 bus ID: N/A chip ID: brcm: 
           Sound Server: ALSA v: k4.1.19-v7+ 
Network:   Card-1: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter type: USB driver: smsc95xx 
           bus ID: 1:3 chip ID: 0424:ec00 
           IF: eth0 state: down mac: <filter> 
           IP v6: <filter> virtual: tentative scope: link 
           Card-2: Edimax EW-7811Un 802.11n Wireless Adapter [Realtek RTL8188CUS] type: USB driver: rtl8192cu 
           bus ID: 1:4 chip ID: 7392:7811 
           IF: wlan0 state: up mac: <filter> 
           IP v4: <filter> scope: global broadcast: <filter> 
           IP v6: <filter> scope: link 
           WAN IP: <filter> 
Drives:    Local Storage: total: 60.06 GiB used: 3.39 GiB (5.6%) 
           ID-1: /dev/mmcblk0 model: NCard size: 60.06 GiB serial: <filter> scheme: MBR 
           Message: No Optical or Floppy data was found. 
RAID:      Message: No RAID data was found. 
Partition: ID-1: / size: 59.01 GiB used: 3.37 GiB (5.7%) fs: ext4 dev: /dev/mmcblk0p2 label: N/A uuid: N/A 
           ID-2: /boot size: 59.9 MiB used: 19.9 MiB (33.2%) fs: vfat dev: /dev/mmcblk0p1 label: boot 
           uuid: 04FE-51E9 
           ID-3: /mnt/Music size: 1007.81 GiB used: 498.00 GiB (49.4%) fs: cifs remote: //192.168.1.111/Music 
           label: N/A uuid: N/A 
Unmounted: Message: No unmounted partitions found. 
USB:       Hub: 1:1 usb: 2.0 type: Full speed (or root) hub chip ID: 1d6b:0002 
           Hub: 1:2 usb: 2.0 type: Standard Microsystems Single TT chip ID: 0424:9514 
           Device-1: Standard Microsystems SMSC9512/9514 Fast Ethernet Adapter bus ID: 1:3 usb: 2.0 
           type: Vendor Specific Class chip ID: 0424:ec00 
           Device-2: Edimax EW-7811Un 802.11n Wireless Adapter [Realtek RTL8188CUS] bus ID: 1:4 usb: 2.0 
           type: Vendor Specific Protocol chip ID: 7392:7811 
Sensors:   Message: No sensors data was found. Is sensors configured? 
Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http://mirrordirector.raspbian.org/raspbian/ jessie main contrib non-free rpi
           Active apt repos in: /etc/apt/sources.list.d/raspi.list 
           1: deb http://archive.raspberrypi.org/debian/ jessie main ui
Processes: CPU top: 5 
           1: cpu: 189% command: pinxi started by: perl pid: 1067 mem: 13.9 MiB (1.5%) 
           2: cpu: 5.4% command: init pid: 1 mem: 3.80 MiB (0.4%) 
           3: cpu: 2.0% command: openbox pid: 776 mem: 11.0 MiB (1.1%) 
           4: cpu: 2.0% command: lxpanel pid: 780 mem: 21.8 MiB (2.3%) 
           5: cpu: 1.5% command: mpd pid: 534 mem: 30.8 MiB (3.3%) 
           Memory top: 5 
           1: mem: 30.8 MiB (3.3%) command: mpd pid: 534 cpu: 1.5% 
           2: mem: 27.1 MiB (2.9%) command: x pid: 643 cpu: 1.2% 
           3: mem: 21.8 MiB (2.3%) command: lxpanel pid: 780 cpu: 2.0% 
           4: mem: 17.4 MiB (1.8%) command: pcmanfm pid: 782 cpu: 1.2% 
           5: mem: 13.9 MiB (1.5%) command: pinxi started by: perl pid: 1067 cpu: 189% 
Info:      Processes: 112 Uptime: 1m Memory: 989.8 MiB used: 158.6 MiB (16.0%) gpu: 64.0 MiB Init: systemd 
           v: 215 runlevel: 5 Compilers: gcc: 4.9.2 alt: 4.9 Shell: bash v: 4.3.30 running in: tty 0 
           pinxi: 3.0.19-3
MSI 970A-G43 MB, AMD FX-6300 (six core), 16GB RAM, GeForce 730, Samsung 850 EVO 250GB SSD, Seagate Barracuda XT 3TB

User avatar
timkb4cq
Forum Veteran
Forum Veteran
Posts: 4343
Joined: Wed Jul 12, 2006 4:05 pm

Re: ARM testing and debugger data for pinxi please!

#6 Post by timkb4cq » Wed Jul 25, 2018 1:28 pm

The -3 update enabled pinxi to work on my Samsung Chromebook again.

Code: Select all

(stretch)tim@localhost:~$ sudo pinxi -zv8
[sudo] password for tim: 
System:
  Host: localhost Kernel: 3.8.11 armv7l bits: 32 compiler: gcc v: 4.9.x 
  Desktop: Xfce 4.12.3 tk: Gtk 2.24.30 info: xfce4-panel wm: xfwm4 
  dm: startx Distro: Debian GNU/Linux 9 (stretch) 
Machine:
  Type: ARM Device System: Google Snow details: SAMSUNG EXYNOS5 rev: N/A 
  serial: N/A 
Battery:
  Device-1: sbs-104-000b model: SANYO 4302A40 serial: <filter> charge: N/A 
  status: Full 
Memory:
  RAM Report: message: No RAM data was found. SBC? 
PCI Slots:
  ARM: No ARM data found for this feature. 
CPU:
  Topology: Dual Core model: ARMv7 v7l bits: 32 type: MCP arch: v7l rev: 4 
  bogomips: 0 
  Speed: 200 MHz min/max: 200/1700 MHz Core speeds (MHz): 1: 1700 2: 1700 
  Features: edsp fastmult half idiva idivt neon swp thumb thumbee tls vfp 
  vfpv3 vfpv4 
Graphics:
  Card-1: exynos4212-hdmi driver: exynos_hdmi v: N/A bus ID: N/A 
  chip ID: samsung:14530000 
  Display: server: X.Org 1.19.2 driver: exynos_hdmi 
  resolution: 1366x768~60Hz 
  OpenGL: renderer: N/A v: N/A direct render: N/A 
Use of uninitialized value $row[6] in concatenation (.) or string at /usr/local/bin/pinxi line 5704.
Audio:
  Card-1: exynos5-hdmi-audio driver: exynos_hdmi_audio bus ID: N/A 
  chip ID: samsung: 
  Card-2: exynos4212-hdmi driver: exynos_hdmi bus ID: N/A 
  chip ID: samsung:14530000 
  Sound Server: ALSA v: k3.8.11 
Network:
  ARM: No ARM data found for this feature. 
  IF-ID-1: mlan0 state: up speed: N/A duplex: N/A mac: <filter> 
  IP v4: <filter> scope: global broadcast: <filter> 
  IP v6: <filter> scope: link 
  WAN IP: <filter> 
Drives:
  Local Storage: total: 14.68 GiB used: 6.13 GiB (41.7%) 
  ID-1: /dev/mmcblk0 model: SEM16G size: 14.68 GiB serial: <filter> 
  scheme: GPT 
  Message: No Optical or Floppy data was found. 
RAID:
  Message: No RAID data was found. 
Partition:
  ID-1: / size: 9.89 GiB used: 5.96 GiB (60.3%) fs: ext4 dev: /dev/mmcblk0p1 
  label: N/A uuid: 8acfa9e3-e507-4b46-ad86-fe6e44491d7c 
  ID-2: /home/<filter>/Downloads size: 9.89 GiB used: 5.96 GiB (60.3%) 
  fs: ecryptfs dev: ERR-102 label: N/A uuid: N/A 
  ID-3: /lib/modules/3.8.11 size: 1.19 GiB used: 921.6 MiB (75.5%) fs: ext4 
  dev: /dev/mmcblk0p1 label: N/A uuid: 8acfa9e3-e507-4b46-ad86-fe6e44491d7c 
  ID-4: /var/host/timezone size: 2.92 GiB used: 166.0 MiB (5.6%) fs: ext4 
  dev: /dev/mapper/encstateful label: N/A uuid: N/A 
Unmounted:
  ID-1: /dev/dm-0 size: 1.21 GiB fs: ext2 label: N/A uuid: N/A 
  ID-2: /dev/dm-1 size: 2.97 GiB fs: ext4 label: N/A 
  uuid: 46f716b5-2588-4174-8c7a-629625ab2d70 
  ID-3: /dev/dm-2 size: 12.2 MiB fs: hfs label: N/A uuid: N/A 
  ID-4: /dev/mmcblk0boot0 size: 2.0 MiB fs: N/A label: N/A uuid: N/A 
  ID-5: /dev/mmcblk0boot1 size: 2.0 MiB fs: N/A label: N/A uuid: N/A 
  ID-6: /dev/mmcblk0p2 size: 16.0 MiB fs: N/A label: N/A uuid: N/A 
  ID-7: /dev/mmcblk0p3 size: 2.00 GiB fs: ext4 label: ROOT-A uuid: N/A 
  ID-8: /dev/mmcblk0p4 size: 16.0 MiB fs: N/A label: N/A uuid: N/A 
  ID-9: /dev/mmcblk0p5 size: 2.00 GiB fs: ext4 label: ROOT-A uuid: N/A 
  ID-10: /dev/mmcblk0p6 size: 0 KiB fs: N/A label: N/A uuid: N/A 
  ID-11: /dev/mmcblk0p7 size: 0 KiB fs: N/A label: N/A uuid: N/A 
  ID-12: /dev/mmcblk0p8 size: 16.0 MiB fs: ext4 label: OEM 
  uuid: e19e68c6-70ba-4590-848c-092fabe41fc8 
  ID-13: /dev/mmcblk0p9 size: 0 KiB fs: N/A label: N/A uuid: N/A 
USB:
  Missing: Required tool lsusb not installed. Check --recommends 
Sensors:
  System Temperatures: cpu: 39.0 C mobo: N/A 
  Fan Speeds (RPM): N/A 
Repos:
  Active apt repos in: /etc/apt/sources.list 
  1: deb http://httpredir.debian.org/debian/ stretch main non-free contrib
  2: deb-src http://httpredir.debian.org/debian/ stretch main non-free contrib
Processes:
  CPU top: 5 
  1: cpu: 52.7% command: firefox-esr pid: 4738 mem: 228.3 MiB (11.4%) 
  2: cpu: 39.0% command: pinxi started by: perl pid: 5126 
  mem: 12.0 MiB (0.5%) 
  3: cpu: 25.9% command: firefox-esr pid: 4781 mem: 99.2 MiB (4.9%) 
  4: cpu: 14.7% command: xorg pid: 3519 mem: 64.6 MiB (3.2%) 
  5: cpu: 12.7% command: chrome pid: 1034 mem: 213.5 MiB (10.6%) 
  Memory top: 5 
  1: mem: 228.3 MiB (11.4%) command: firefox-esr pid: 4738 cpu: 52.7% 
  2: mem: 213.5 MiB (10.6%) command: chrome pid: 1034 cpu: 12.7% 
  3: mem: 99.2 MiB (4.9%) command: firefox-esr pid: 4781 cpu: 25.9% 
  4: mem: 85.7 MiB (4.2%) command: chrome pid: 2527 cpu: 4.8% 
  5: mem: 85.2 MiB (4.2%) command: chrome pid: 1189 cpu: 3.4% 
Info:
  Processes: 214 Uptime: 5m Memory: 1.95 GiB used: 832.5 MiB (41.6%) 
  Init: N/A v: N/A Compilers: gcc: 6.3.0 alt: 6 Shell: bash (sudo) v: 4.4.12 
  running in: xfce4-terminal pinxi: 3.0.19-3
MSI 970A-G43 MB, AMD FX-6300 (six core), 16GB RAM, GeForce 730, Samsung 850 EVO 250GB SSD, Seagate Barracuda XT 3TB

User avatar
KoO
Forum Regular
Forum Regular
Posts: 256
Joined: Fri Feb 10, 2017 1:21 am

Re: ARM testing and debugger data for pinxi please!

#7 Post by KoO » Fri Jul 27, 2018 12:18 am

Code: Select all

antix# pinxi -zv8 
System:
  Host: antix Kernel: 4.17.4-antix.1-amd64-smp x86_64 
  bits: 64 compiler: gcc v: 6.3.0 
  Desktop: i3 4.15-134-ge8057b2f dm: slim 
  Distro: antiX-17.1_x64-full Heather Heyer 17 March 2018 
  base: Debian GNU/Linux 9 (stretch) 
Machine:
  Type: Laptop System: LENOVO product: 2349GCM 
  v: ThinkPad T430 serial: <filter> Chassis: type: 10 
  serial: <filter> 
  Mobo: LENOVO model: 2349GCM serial: <filter> 
  UEFI: LENOVO v: G1ETB7WW (2.77 ) date: 06/05/2018 
Battery:
  ID-1: BAT0 charge: 47.3 Wh 
  condition: 47.3/47.5 Wh (100%) volts: 12.3/10.8 
  model: LGC 45N1005 type: Li-ion serial: <filter> 
  status: Full 
Memory:
  Array-1: capacity: 16 GiB slots: 2 EC: None 
  max module size: 8 GiB note: est. 
  Device-1: ChannelA-DIMM0 size: 4 GiB speed: 1867 MHz 
  type: DDR3 detail: synchronous bus width: 64 bits 
  total: 64 bits manufacturer: 04CD 
  part-no: F3-1866C11-4GRSL serial: N/A 
  Device-2: ChannelB-DIMM0 size: 4 GiB speed: 1867 MHz 
  type: DDR3 detail: synchronous bus width: 64 bits 
  total: 64 bits manufacturer: 04CD 
  part-no: F3-1866C11-4GRSL serial: N/A 
PCI Slots:
  Slot: 1 type: x1 PCI Express ExpressCard Slot 
  status: Available length: Other 
  Slot: N/A type: Media Card Slot status: Available 
  length: Other 
CPU:
  Topology: Dual Core model: Intel Core i5-3320M bits: 64 
  type: MT MCP arch: Ivy Bridge rev: 9 L2 cache: 3072 KiB 
  bogomips: 20751 
  Speed: 1197 MHz min/max: 1200/3300 MHz 
  Core speeds (MHz): 1: 1197 2: 1197 3: 1197 4: 1197 
  Flags: acpi aes aperfmperf apic arat arch_perfmon avx 
  bts clflush cmov constant_tsc cpuid cpuid_fault cx16 
  cx8 de ds_cpl dtes64 dtherm dts epb ept erms est f16c 
  flexpriority fpu fsgsbase fxsr ht ibpb ibrs ida lahf_lm 
  lm mca mce mmx monitor msr mtrr nonstop_tsc nopl nx pae 
  pat pbe pcid pclmulqdq pdcm pebs pge pln pni popcnt pse 
  pse36 pti pts rdrand rdtscp rep_good sep smep smx ss 
  ssbd sse sse2 sse4_1 sse4_2 ssse3 stibp syscall tm tm2 
  tpr_shadow tsc tsc_deadline_timer vme vmx vnmi vpid 
  x2apic xsave xsaveopt xtopology xtpr 
Graphics:
  Card-1: Intel 3rd Gen Core processor Graphics 
  vendor: Lenovo driver: i915 v: kernel bus ID: 00:02.0 
  chip ID: 8086:0166 
  Display: server: X.Org 1.19.2 driver: intel 
  resolution: 1600x900~60Hz 
  OpenGL: renderer: Mesa DRI Intel Ivybridge Mobile 
  v: 3.3 Mesa 13.0.6 compat-v: 3.0 direct render: Yes 
Audio:
  Card-1: Intel 7 Series/C216 Family High Definition Audio vendor: Lenovo driver: snd_hda_intel v: kernel 
  bus ID: 00:1b.0 chip ID: 8086:1e20 
  Sound Server: ALSA v: k4.17.4-antix.1-amd64-smp 
Network:
  Card-1: Intel 82579LM Gigabit Network driver: e1000e 
  v: 3.2.6-k port: 6080 bus ID: 00:19 chip ID: 8086:1502 
  IF: eth0 state: down mac: <filter> 
  Card-2: Intel Centrino Advanced-N 6205 [Taylor Peak] 
  driver: iwlwifi v: kernel bus ID: 03:00 
  chip ID: 8086:0085 
  IF: wlan0 state: up mac: <filter> 
  IP v4: <filter> scope: global broadcast: <filter> 
  IP v6: <filter> scope: link 
  WAN IP: <filter> 
Drives:
  Local Storage: total: 1.14 TiB used: 10.45 GiB (0.9%) 
  ID-1: /dev/sda vendor: Samsung model: SSD 860 EVO 250GB 
  size: 232.89 GiB speed: 6.0 Gb/s serial: <filter> 
  rev: 1B6Q temp: 41 C scheme: GPT 
  ID-2: /dev/sdb vendor: HGST (Hitachi) 
  model: HTS721010A9E630 size: 931.51 GiB speed: 6.0 Gb/s 
  rotation: 7200 rpm serial: <filter> rev: A3U0 
  temp: 36 C scheme: GPT 
  Message: No Optical or Floppy data was found. 
RAID:
  Message: No RAID data was found. 
Partition:
  ID-1: / size: 79.71 GiB used: 7.80 GiB (9.8%) fs: ext4 
  dev: /dev/sda6 label: rootantiX 
  uuid: 44c25052-6734-424c-a60c-606bf5c82004 
  ID-2: /boot/efi size: 95.0 MiB used: 25.5 MiB (26.8%) 
  fs: vfat dev: /dev/sda2 label: N/A uuid: E8FD-2B7F 
  ID-3: /media/New_Volume size: 931.39 GiB 
  used: 2.62 GiB (0.3%) fs: ntfs dev: /dev/sdb2 
  label: New Volume uuid: E01CBBD21CBBA248 
Unmounted:
  ID-1: /dev/sda1 size: 300.0 MiB fs: ntfs 
  label: Recovery uuid: DE38FC8738FC6047 
  ID-2: /dev/sda3 size: 128.0 MiB fs: N/A label: N/A 
  uuid: N/A 
  ID-3: /dev/sda4 size: 70.80 GiB fs: ntfs label: N/A 
  uuid: 0ED25AF1D25ADD11 
  ID-4: /dev/sda5 size: 80.08 GiB fs: ext4 
  label: rootMX17 
  uuid: fade9e4e-05bd-4a0c-a91c-3dd072aecb19 
  ID-5: /dev/sdb1 size: 128.0 MiB fs: N/A label: N/A 
  uuid: N/A 
USB:
  Hub: 1:1 usb: 2.0 type: Full speed (or root) hub 
  chip ID: 1d6b:0002 
  Hub: 1:2 usb: 2.0 
  type: Intel Integrated Rate Matching Hub 
  chip ID: 8087:0024 
  Device-1: Upek TouchChip Fingerprint Coprocessor (WBF 
  advanced mode) 
  bus ID: 1:3 usb: 1.1 type: Vendor Specific Class 
  chip ID: 147e:2020 
  Device-2: Broadcom BCM20702 Bluetooth 4.0 [ThinkPad] 
  bus ID: 1:4 usb: 2.0 type: Vendor Specific Class 
  chip ID: 0a5c:21e6 
  Hub: 2:1 usb: 2.0 type: Full speed (or root) hub 
  chip ID: 1d6b:0002 
  Hub: 2:2 usb: 2.0 
  type: Intel Integrated Rate Matching Hub 
  chip ID: 8087:0024 
  Hub: 2:3 usb: 2.0 
  type: Lenovo ThinkPad Mini Dock Plus Series 3 
  chip ID: 17ef:100a 
  Device-3: Logitech Unifying Receiver bus ID: 2:4 
  usb: 2.0 type: Keyboard chip ID: 046d:c534 
  Hub: 3:1 usb: 2.0 type: Full speed (or root) hub 
  chip ID: 1d6b:0002 
  Hub: 4:1 usb: 3.0 type: Full speed (or root) hub 
  chip ID: 1d6b:0003 
Sensors:
  System Temperatures: cpu: 43.0 C mobo: N/A 
  Fan Speeds (RPM): cpu: 2564 
Repos:
  No active apt repos in: /etc/apt/sources.list 
  Active apt repos in: /etc/apt/sources.list.d/antix.list 
  1: deb http://mx.debian.nz/antix/stretch/ stretch nosystemd main
  Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list 
  1: deb http://ftp.au.debian.org/debian/ stretch-updates main contrib non-free
  Active apt repos in: /etc/apt/sources.list.d/debian.list 
  1: deb http://ftp.au.debian.org/debian/ stretch main contrib non-free
  2: deb http://security.debian.org/ stretch/updates main contrib non-free
  Active apt repos in: /etc/apt/sources.list.d/i3-autobuild.list 
  1: deb http://dl.bintray.com/i3/i3-autobuild/ sid main
  No active apt repos in: /etc/apt/sources.list.d/onion.list 
  No active apt repos in: /etc/apt/sources.list.d/various.list 
  Active apt repos in: /etc/apt/sources.list.d/waterfox.list 
  1: deb https://dl.bintray.com/hawkeye116477/waterfox-deb/ release main
Processes:
  CPU top: 5 
  1: cpu: 8.8% command: waterfox pid: 7392 
  mem: 388.2 MiB (4.9%) 
  2: cpu: 1.2% command: xorg pid: 2436 
  mem: 62.0 MiB (0.7%) 
  3: cpu: 0.3% command: conky pid: 2884 
  mem: 18.0 MiB (0.2%) 
  4: cpu: 0.2% command: conky pid: 2783 
  mem: 16.1 MiB (0.2%) 
  5: cpu: 0.1% command: acpid pid: 2072 
  mem: 1.73 MiB (0.0%) 
  Memory top: 5 
  1: mem: 388.2 MiB (4.9%) command: waterfox pid: 7392 
  cpu: 8.8% 
  2: mem: 62.0 MiB (0.7%) command: xorg pid: 2436 
  cpu: 1.2% 
  3: mem: 60.5 MiB (0.7%) command: guake 
  started by: python3 pid: 2769 cpu: 0.0% 
  4: mem: 36.4 MiB (0.4%) command: i3 pid: 2754 cpu: 0.0% 
  5: mem: 32.7 MiB (0.4%) command: mpd.conf 
  started by: mpd pid: 2448 cpu: 0.0% 
Info:
  Processes: 158 Uptime: 50m Memory: 7.61 GiB 
  used: 529.2 MiB (6.8%) Init: SysVinit v: 2.88 
  runlevel: 5 default: 5 Compilers: gcc: 6.3.0 alt: 6 
  Shell: zsh (su) v: 5.5.1 running in: urxvt 
  pinxi: 3.0.19-14 
antix# 

sorry don't have an arm device .Lenovo T430
Da Main Box .. Antix 17 (4.18.7) i3 ,Windows8.1 , Intel Xeon E3-1241 v3 , 16gb HyperX , Samsung EVO M2 250 GB , Samsung EVO SSD 500 GB , GTX 970
Lappy .. Lenovo T430 AntiX17.1 (4.18.4) i3 ,Windows8.1 , i5 +4000 , 8gb , Samsung EVO 860 250 GB , 1TB HGST

Post Reply

Return to “antiX”