Page 2 of 2

Re: New 4.14 Kernel with Ryzen Processor?

Posted: Sat Dec 02, 2017 1:21 am
by stsoh
kernel 4.14.3 is out but not on antiX repo yet.
there are still many bugs yet to be solve, can't wait for 4.15 ver.
4.13.13 is stable, 4.13.16 eol

Re: New 4.14 Kernel with Ryzen Processor?

Posted: Wed Dec 13, 2017 4:07 pm
by namida12
I just used Package installer to update Kernel to 4.13.4 seems that did not happen. Something else I should have done?

Code: Select all

$ inxi -F
System:    Host: antix250 Kernel: 4.10.5-antix.3-amd64-smp x86_64 bits: 64
           Desktop: IceWM 1.4.2 Distro: antiX-17_x64-full Heather Heyer 24 October 2017
Machine:   Device: laptop Mobo: MSI model: B350M GAMING PRO (MS-7A39) v: 1.0 serial: N/A
           UEFI [Legacy]: American Megatrends v: 2.30 date: 03/24/2017
CPU:       Quad core AMD Ryzen 5 1500X (-MT-MCP-) cache: 2048 KB
           clock speeds: max: 3500 MHz 1: 1550 MHz 2: 3000 MHz 3: 1550 MHz 4: 1550 MHz
           5: 1550 MHz 6: 1550 MHz 7: 1550 MHz 8: 1550 MHz
Graphics:  Card: Advanced Micro Devices [AMD/ATI] RV670 [Radeon HD 3690/3850]
           Display Server: X.Org 1.19.2
           drivers: ati,radeon (unloaded: modesetting,fbdev,vesa)
           Resolution: 1920x1080@60.00hz
           OpenGL: renderer: Gallium 0.4 on AMD RV670 (DRM 2.49.0 / 4.10.5-antix.3-amd64-smp, LLVM 3.9.1)
           version: 3.3 Mesa 13.0.6
Audio:     Card-1 Advanced Micro Devices [AMD] Device 1457 driver: snd_hda_intel
           Card-2 Advanced Micro Devices [AMD/ATI] RV670/680 HDMI Audio [Radeon HD 3690/3800 Series]
           driver: snd_hda_intel
           Sound: Advanced Linux Sound Architecture v: k4.10.5-antix.3-amd64-smp
Network:   Card: Realtek RTL8111/8168/8411 PCIE Gigabit Ethernet Controller
           driver: r8169
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac: 18:d6:c7:06:f9:4a
Drives:    HDD Total Size: 250.1GB (15.2% used)
           ID-1: /dev/sda model: Samsung_SSD_850 size: 250.1GB
Partition: ID-1: / size: 14G used: 4.5G (35%) fs: ext4 dev: /dev/sda1
           ID-2: /home size: 206G used: 28G (14%) fs: ext4 dev: /dev/sda3
           ID-3: swap-1 size: 4.29GB used: 0.00GB (0%) fs: swap dev: /dev/sda2
Sensors:   System Temperatures: cpu: No active sensors found. Have you configured your sensors yet? mobo: N/A gpu: 87.0
Info:      Processes: 249 Uptime: 3 min Memory: 235.1/16066.0MB
           Client: Shell (bash) inxi: 2.3.53 

JR

Re: New 4.14 Kernel with Ryzen Processor?

Posted: Wed Dec 13, 2017 4:19 pm
by anticapitalista
Reboot and choose the new one at the grub? If antiX is not controlling your grub, then you will need to boot into the linux that is and type

Code: Select all

update-grub
in a root terminal.

Re: New 4.14 Kernel with Ryzen Processor?

Posted: Wed Dec 13, 2017 4:33 pm
by entropyfoe
namida et al,

My experience with 4.13 (new MX17 beta2,3 and RC1) was sporadic crashes, 1-2 per day, usually at idle.
There are lots of reports of this on the web.

I have reverted RC1 to the 4.10 kernel used in antix 17 final. Under antix, with 4.10, 21 days up-time no lockups or crashes. Plus now >1.5 days with 4.10 under MX 17 RC1. All stable. It was so easy with the MX Package Installer. BTW, how is that list of available kernels populated from that list? What ever is in the enabled repos? Do you have to enable test repos to get more options?

I am also awaiting the 4.15...I hear there will be lots of new Ryzen code, including temperature monitoring.
For now, I will go with stability, and see how far 4.10 will take me with MX17 , and do more testing. Maybe I'll try a stress test with as many programs as possible, or I love the MX Snapshot tool, it pegs the CPU, top reports 1100% CPU for the squashfs !.... and the power at the wall goes from 50W to 140 Watts, that tests the cooling.
So far everything is working, so I can't see a benefit to 4.13 (unstable) or 4.14 (unknown). I read on the Liquorix boards, and it all seems very bleeding edge and buggy. What are users experience with liquorix stability?

Re: New 4.14 Kernel with Ryzen Processor?

Posted: Thu Dec 14, 2017 1:14 am
by namida12
anticapitalista wrote:Reboot and choose the new one at the grub? If antiX is not controlling your grub, then you will need to boot into the linux that is and type

Code: Select all

update-grub
in a root terminal.
anticapitalista, and entropyfoe,

Only have AntiX 17 installed on this system.

Thanks for the info: updated now. entropyfoe, I will check the stability on this system - There is little to lose in this system if crashes or completely borks...

Have another system for testing MX-17 RC1 that should be up and running tomorrow.

Code: Select all

green250@antix250:~
$ inxi -F
System:    Host: antix250 Kernel: 4.13.4-antix.1-amd64-smp x86_64 bits: 64 Desktop: IceWM 1.4.2
           Distro: antiX-17_x64-full Heather Heyer 24 October 2017
Machine:   Device: laptop Mobo: MSI model: B350M GAMING PRO (MS-7A39) v: 1.0 serial: N/A
           UEFI [Legacy]: American Megatrends v: 2.30 date: 03/24/2017
CPU:       Quad core AMD Ryzen 5 1500X (-MT-MCP-) cache: 2048 KB
           clock speeds: max: 3500 MHz 1: 3493 MHz 2: 3493 MHz 3: 3493 MHz 4: 3493 MHz 5: 3493 MHz 6: 3493 MHz
           7: 3493 MHz 8: 3493 MHz
Graphics:  Card: Advanced Micro Devices [AMD/ATI] RV670 [Radeon HD 3690/3850]
           Display Server: X.Org 1.19.2 drivers: ati,radeon (unloaded: modesetting,fbdev,vesa)
           Resolution: 1920x1080@60.00hz
           OpenGL: renderer: Gallium 0.4 on AMD RV670 (DRM 2.50.0 / 4.13.4-antix.1-amd64-smp, LLVM 3.9.1)
           version: 3.3 Mesa 13.0.6
Audio:     Card-1 Advanced Micro Devices [AMD] Device 1457 driver: snd_hda_intel
           Card-2 Advanced Micro Devices [AMD/ATI] RV670/680 HDMI Audio [Radeon HD 3690/3800 Series]
           driver: snd_hda_intel
           Sound: Advanced Linux Sound Architecture v: k4.13.4-antix.1-amd64-smp
Network:   Card: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller driver: r8169
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac: 18:d6:c7:06:f9:4a
Drives:    HDD Total Size: 250.1GB (15.4% used)
           ID-1: /dev/sda model: Samsung_SSD_850 size: 250.1GB
Partition: ID-1: / size: 14G used: 4.9G (38%) fs: ext4 dev: /dev/sda1
           ID-2: /home size: 206G used: 28G (14%) fs: ext4 dev: /dev/sda3
           ID-3: swap-1 size: 4.29GB used: 0.00GB (0%) fs: swap dev: /dev/sda2
Sensors:   System Temperatures: cpu: No active sensors found. Have you configured your sensors yet? mobo: N/A gpu: 85.0
Info:      Processes: 206 Uptime: 2 min Memory: 494.5/16065.9MB Client: Shell (bash) inxi: 2.3.53 


JR

Re: New 4.14 Kernel with Ryzen Processor?

Posted: Mon Dec 18, 2017 1:22 pm
by namida12
entropyfoe wrote:namida et al,

My experience with 4.13 (new MX17 beta2,3 and RC1) was sporadic crashes, 1-2 per day, usually at idle.
There are lots of reports of this on the web.

I have reverted RC1 to the 4.10 kernel used in antix 17 final. Under antix, with 4.10, 21 days up-time no lockups or crashes. Plus now >1.5 days with 4.10 under MX 17 RC1. All stable. It was so easy with the MX Package Installer.
entropyfoe,

After a few days testing the newer kernel (4.13) I can confirm the systems runs well, except @ Idle, where system would lock up mouse cursor & freeze system. From behind the keyboard I did not notice anything different in boot speed, or video processing with the newer kernel. I have also reverted to 4.10 kernel and all is completely stable again.

JR