antiX-16-b1-full available for testing
Re: antiX-16-b1-full64 GDEBI
gdebi does not work
any solution...?
regards
hp pavilion 64 bit 8gb ram
any solution...?
regards
hp pavilion 64 bit 8gb ram
- anticapitalista
- Developer
- Posts: 4167
- Joined: Sat Jul 15, 2006 10:40 am
Re: antiX-16-b1-full available for testing
re: gdebi
You need to install it.
You need to install it.
anticapitalista
Reg. linux user #395339.
Philosophers have interpreted the world in many ways; the point is to change it.
antiX with runit - lean and mean.
https://antixlinux.com
Reg. linux user #395339.
Philosophers have interpreted the world in many ways; the point is to change it.
antiX with runit - lean and mean.
https://antixlinux.com
Re: antiX-16-b1-full available for testing
So far all I've tried is booting to a LiveUSB session in both UEFI non-UEFI modes.
It seems fine, here's a inxi report
The only complaint (minor) that I have is when booting in UEFI mode, the '>>> Advanced Options for antiX-16-b1 <<<' menu doesn't have a 1600x900 option (I editted the one for 1600x1200).
1600x900 is available in the F7 list of console resolutions when you boot the LiveUSB in non-UEFI mode.
It seems fine, here's a inxi report
Code: Select all
demo@antix1:~
$ inxi -Fxxx
System: Host: antix1 Kernel: 4.4.2-antix.2-amd64-smp x86_64 (64 bit gcc: 4.9.3) Desktop: IceWM 1.3.8 dm: slim
Distro: antiX-16-b1_x64-full Berta Cáceres 11 April 2016
Machine: Mobo: Gateway model: SX2185 Bios: American Megatrends v: P11-A4 date: 09/17/2013
CPU: Dual core AMD E1-2500 APU with Radeon HD Graphics (-MCP-) cache: 2048 KB
flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm) bmips: 5589
clock speeds: min/max: 800/1400 MHz 1: 1200 MHz 2: 1000 MHz
Graphics: Card: Advanced Micro Devices [AMD/ATI] Kabini [Radeon HD 8240 / R3 Series]
bus-ID: 00:01.0 chip-ID: 1002:9838
Display Server: X.Org 1.16.4 drivers: ati,radeon (unloaded: fbdev,vesa) Resolution: 1600x900@60.00hz
GLX Renderer: Gallium 0.4 on AMD KABINI GLX Version: 3.0 Mesa 10.3.2 Direct Rendering: Yes
Audio: Card-1 Advanced Micro Devices [AMD] FCH Azalia Controller
driver: snd_hda_intel bus-ID: 00:14.2 chip-ID: 1022:780d
Card-2 Advanced Micro Devices [AMD/ATI] Kabini HDMI/DP Audio
driver: snd_hda_intel bus-ID: 00:01.1 chip-ID: 1002:9840
Sound: Advanced Linux Sound Architecture v: k4.4.2-antix.2-amd64-smp
Network: Card: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
driver: r8169 v: 2.3LK-NAPI port: e000 bus-ID: 01:00.0 chip-ID: 10ec:8168
IF: eth0 state: up speed: 100 Mbps duplex: full mac: f8:0f:41:ac:77:6f
Drives: HDD Total Size: 501.1GB (1.8% used) ID-1: /dev/sda model: ST500DM002 size: 500.1GB serial: W3T26NVP
ID-2: USB /dev/sdb model: Flash_Disk size: 1.0GB serial: 60034848-0:0
Partition: ID-1: / size: 2.7G used: 18M (1%) fs: overlay dev: N/A
ID-2: swap-1 size: 8.86GB used: 0.00GB (0%) fs: swap dev: /dev/sda6
Sensors: System Temperatures: cpu: 41.0C mobo: N/A gpu: 41.0
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 135 Uptime: 2 min Memory: 268.8/3384.3MB
Init: SysVinit v: 2.88 runlevel: 5 default: 5 Gcc sys: 4.9.2
Client: Shell (bash 4.3.301 running in roxterm) inxi: 2.2.31
1600x900 is available in the F7 list of console resolutions when you boot the LiveUSB in non-UEFI mode.
Re: antiX-16-b1-full available for testing
This looks great OOTB! I love the wallpaper and the menu is very clear. Fast boot on this old machine.
Some comments installed on machine below (UPDATED):
--wlan0 did not come up automatically, WICD didn't work (no adaptor found) but ceni did. (On the installation this time, settings had been saved from installation on another machine).
--mouse was invisible against the background with default white, thought it was broken but it worked on MX-15, so finally changed to murrine blue; with now b2, mouse is invisible until I simply use arrows to click Menu > Applications > Preferences > CUstomize Look and Feel, and as soon as that dialog screen opens the mouse is visible.
--tried to run Personal > Personal Help Video, but got a gstreamer error ("check log")
--it would be a lot easier on new users IMO if when the dialog for root password came up (on User Manager, for instance) it specified it needed the sudo password--have seen many posts on antiX Forum about this
--can't test multimedia on this machine, too much doesn't work any more (starting with speakers)
Some comments installed on machine below (UPDATED):
--wlan0 did not come up automatically, WICD didn't work (no adaptor found) but ceni did. (On the installation this time, settings had been saved from installation on another machine).
--mouse was invisible against the background with default white, thought it was broken but it worked on MX-15, so finally changed to murrine blue; with now b2, mouse is invisible until I simply use arrows to click Menu > Applications > Preferences > CUstomize Look and Feel, and as soon as that dialog screen opens the mouse is visible.
--tried to run Personal > Personal Help Video, but got a gstreamer error ("check log")
--it would be a lot easier on new users IMO if when the dialog for root password came up (on User Manager, for instance) it specified it needed the sudo password--have seen many posts on antiX Forum about this
--can't test multimedia on this machine, too much doesn't work any more (starting with speakers)
Code: Select all
$ inxi -F
System: Host: dell700m Kernel: 4.4.2-antix.2-486-smp i686 (32 bit)
Desktop: IceWM 1.3.8
Distro: antiX-16-b1_386-full Berta Cáceres 11 April 2016
Machine: System: Dell product: Inspiron 700m v: -1
Mobo: DELL SYSTEM model: Inspiron 700m v: Rev.A
Bios: Phoenix v: A02 date: 02/01/05
CPU: Single core Intel Pentium M (-UP-) cache: 2048 KB
speed: 1600 MHz (max)
Graphics: Card: Intel 82852/855GM Integrated Graphics Device
Display Server: X.Org 1.16.4 drivers: intel (unloaded: fbdev,vesa)
Resolution: 1280x800@65.28hz
GLX Renderer: Mesa DRI Intel 852GM/855GM x86/MMX/SSE2
GLX Version: 1.3 Mesa 10.3.2
Audio: Card Intel 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller
driver: snd_intel8x0
Sound: Advanced Linux Sound Architecture v: k4.4.2-antix.2-486-smp
Network: Card-1: Broadcom BCM4306 802.11b/g Wireless LAN Controller
driver: b43-pci-bridge
IF: wlan0 state: up mac: 00:0b:7d:18:92:4b
Card-2: Broadcom BCM4401-B0 100Base-TX driver: b44
IF: eth0 state: down mac: 00:0f:1f:b1:d6:13
Drives: HDD Total Size: 40.0GB (9.3% used)
ID-1: /dev/sda model: HTS548040M9AT00 size: 40.0GB
Partition: ID-1: / size: 9.5G used: 2.4G (27%) fs: ext4 dev: /dev/sda2
ID-2: swap-1 size: 1.21GB used: 0.00GB (0%) fs: swap dev: /dev/sda5
Sensors: System Temperatures: cpu: 55.0C mobo: 44.0C
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 124 Uptime: 4 min Memory: 86.8/1239.9MB
Client: Shell (bash) inxi: 2.2.31
Production: 5.10, MX-23 Xfce, AMD FX-4130 Quad-Core, GeForce GT 630/PCIe/SSE2, 16 GB, SSD 120 GB, Data 1TB
Personal: Lenovo X1 Carbon with MX-23 Fluxbox and Windows 10
Other: Raspberry Pi 5 with MX-23 Xfce Raspberry Pi Respin
Personal: Lenovo X1 Carbon with MX-23 Fluxbox and Windows 10
Other: Raspberry Pi 5 with MX-23 Xfce Raspberry Pi Respin
- anticapitalista
- Developer
- Posts: 4167
- Joined: Sat Jul 15, 2006 10:40 am
Re: antiX-16-b1-full available for testing
jerry - is that running live or installed?
anticapitalista
Reg. linux user #395339.
Philosophers have interpreted the world in many ways; the point is to change it.
antiX with runit - lean and mean.
https://antixlinux.com
Reg. linux user #395339.
Philosophers have interpreted the world in many ways; the point is to change it.
antiX with runit - lean and mean.
https://antixlinux.com
- dolphin_oracle
- Developer
- Posts: 20026
- Joined: Sun Dec 16, 2007 1:17 pm
Re: antiX-16-b1-full available for testing
its actually the livestreamer backend libraries. No fix at the moment. we will probably need to remove that menu entry.Jerry3904 wrote:tried to run Personal > Personal Help Video, but got a gstreamer error ("check log")
http://www.youtube.com/runwiththedolphin
lenovo ThinkPad X1 Extreme Gen 4 - MX-23
FYI: mx "test" repo is not the same thing as debian testing repo.
lenovo ThinkPad X1 Extreme Gen 4 - MX-23
FYI: mx "test" repo is not the same thing as debian testing repo.
Re: antiX-16-b1-full available for testing
Looks nice, I wonder though why in KVM (Qemu) the Qt app don't work (black windows and some QPainter errors), they work fine in VirtualBox.
I think I've seen this before but I am not sure what causes it, Qt apps work fine in MX running in KVM.
I think I've seen this before but I am not sure what causes it, Qt apps work fine in MX running in KVM.
Re: antiX-16-b1-full available for testing
Sorry, live.anticapitalista wrote:jerry - is that running live or installed?
EDIT: info now there from installed b1 instead
Production: 5.10, MX-23 Xfce, AMD FX-4130 Quad-Core, GeForce GT 630/PCIe/SSE2, 16 GB, SSD 120 GB, Data 1TB
Personal: Lenovo X1 Carbon with MX-23 Fluxbox and Windows 10
Other: Raspberry Pi 5 with MX-23 Xfce Raspberry Pi Respin
Personal: Lenovo X1 Carbon with MX-23 Fluxbox and Windows 10
Other: Raspberry Pi 5 with MX-23 Xfce Raspberry Pi Respin
- anticapitalista
- Developer
- Posts: 4167
- Joined: Sat Jul 15, 2006 10:40 am
Re: antiX-16-b1-full available for testing
Which qt apps?Adrian wrote:Looks nice, I wonder though why in KVM (Qemu) the Qt app don't work (black windows and some QPainter errors), they work fine in VirtualBox.
I think I've seen this before but I am not sure what causes it, Qt apps work fine in MX running in KVM.
anticapitalista
Reg. linux user #395339.
Philosophers have interpreted the world in many ways; the point is to change it.
antiX with runit - lean and mean.
https://antixlinux.com
Reg. linux user #395339.
Philosophers have interpreted the world in many ways; the point is to change it.
antiX with runit - lean and mean.
https://antixlinux.com
Re: antiX-16-b1-full available for testing
I think all of them (minstal, isosnapshot, etc), try to launch the iso in KVM, I usually do this: kvm -m 2047 -cdrom antiX-16-b1_386-full.isoanticapitalista wrote:Which qt apps?Adrian wrote:Looks nice, I wonder though why in KVM (Qemu) the Qt app don't work (black windows and some QPainter errors), they work fine in VirtualBox.
I think I've seen this before but I am not sure what causes it, Qt apps work fine in MX running in KVM.
It might have to do with my video card too, who knows...