Abhängigkeit nicht erfüllbar: libc6 (>=2.27) solved

Post Reply
Message
Author
User avatar
Hadschi
Posts: 4
Joined: Wed Jun 26, 2019 2:51 am

Abhängigkeit nicht erfüllbar: libc6 (>=2.27) solved

#1 Post by Hadschi »

Hallo und einen Gruss zu Euch

ich hoffe das ich alles richtig mache. So oft ist es nicht passiert, dass ich einen Post abschicke.

Also.... hab MX installiert und war angenehm überrascht wie schnell das ging. Mint geht ja schon recht flott, aber das hier ging noch besser ab.

Alles soweit gut, nur als ich eine meiner Anwendungen installieren wollte, gab,s eine Fehlermeldung: "Abhängigkeiten nicht erfüllbar libc6 (>=2.27)"
Da komme ich nicht weiter. Hab mal geschaut ob ich da etwas nachinstallieren muss, aber leider nichts gefunden.

So jetzt versuche ich mal die obligatorischen Informationen zu liefern:

Code: Select all

inxi -S
System:    Host: heiner Kernel: 4.19.0-5-amd64 x86_64 bits: 64 Desktop: Cinnamon 3.2.7 
           Distro: MX-18.3_x64 Continuum May 26  2019 
cinnamon hab ich nachinstalliert... ging aber bei XFCE auch nicht.

Code: Select all

inxi -m
Memory:    RAM: total: 7.75 GiB used: 1.51 GiB (19.5%) 
           RAM Report: permissions: Unable to run dmidecode. Root privileges required. 

Code: Select all

inxi -d
Drives:    Local Storage: total: 670.70 GiB used: 9.71 GiB (1.4%) 
           ID-1: /dev/sda vendor: Intenso model: SSD Sata III size: 223.57 GiB 
           ID-2: /dev/sdb vendor: Toshiba model: Q300. size: 447.13 GiB 
           Message: No Optical or Floppy data was found. 
schade das es nicht diese Systeminformationfukntion gibt. Da war alles drin.

Hab einen Shot des Programmaufrufs gemacht und angehängt.

Für einen hilfreichen Tip herzlichen Dank. heiner
You do not have the required permissions to view the files attached to this post.
Last edited by Hadschi on Wed Jun 26, 2019 12:51 pm, edited 1 time in total.

User avatar
fehlix
Developer
Posts: 10383
Joined: Wed Apr 11, 2018 5:09 pm

Re: Abhängigkeit nicht erfüllbar: libc6 (>=2.27)

#2 Post by fehlix »

Moin,
folgende Infos wären noch nett zu bekommen:
-> "Quick System Info" (MX Tools / Menu)
-> Welches Programm soll installiert werden, genau Angaben der Quelle und des deb-paketes
Tipp: Fremdprogramme, wenn möglich über "Package Request" bereitstellen lassen.
:puppy:
Gigabyte Z77M-D3H, Intel Xeon E3-1240 V2 (Quad core), 32GB RAM,
GeForce GTX 770, Samsung SSD 850 EVO 500GB, Seagate Barracuda 4TB

User avatar
Hadschi
Posts: 4
Joined: Wed Jun 26, 2019 2:51 am

Re: Abhängigkeit nicht erfüllbar: libc6 (>=2.27)

#3 Post by Hadschi »

Hallo und danke für die schnelle Antwort.

Das Programm ist von einer Gruppe amerikanischer Funkamateure sie link. http://files.js8call.com/latest.html

Reicht diese Angabe? Ich bin kein wirklicher Linux-Freak. Seit es Mint gibt (für mich etwa 6 Jahre), ist Linux richtig gut geworden. Selten, das mal ein Programm welches mir wichtig ist, nicht zu installieren war. Selbst meine Fernsteuersoftware für den Kurzwellentransciever läuft unter Mint perfekt (Wine4.4). Dann sag ich mal Danke.

Gruss heiner (mein richtiger Name:-))

Die Ausgabe von QuickInfo:

Code: Select all

System:    Host: heiner Kernel: 4.19.0-5-amd64 x86_64 bits: 64 compiler: gcc v: 6.3.0 
           Desktop: Cinnamon 3.2.7 Distro: MX-18.3_x64 Continuum May 26  2019 
           base: Debian GNU/Linux 9 (stretch) 
Machine:   Type: Laptop System: TOSHIBA product: SATELLITE L850-13D v: PSKDLE-01P009GR 
           serial: <filter> 
           Mobo: Type2 - Board Vendor Name1 model: Type2 - Board Product Name1 
           v: Type2 - Board Version serial: <filter> UEFI [Legacy]: Insyde v: 6.80 
           date: 10/01/2013 
Battery:   ID-1: BAT0 charge: 30.3 Wh condition: 30.3/48.4 Wh (63%) model: TKBSS NS2P3SZMC4WR 
           status: Full 
CPU:       Topology: Quad Core model: Intel Core i7-3610QM bits: 64 type: MT MCP 
           arch: Ivy Bridge rev: 9 L2 cache: 6144 KiB 
           flags: lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 36717 
           Speed: 1197 MHz min/max: 1200/3300 MHz Core speeds (MHz): 1: 1292 2: 1293 3: 1231 
           4: 1232 5: 1224 6: 1297 7: 1242 8: 1266 
Graphics:  Device-1: AMD Thames [Radeon HD 7500M/7600M Series] 
           vendor: Toshiba America Info Systems driver: radeon v: kernel bus ID: 01:00.0 
           Display: x11 server: X.Org 1.19.2 driver: ati,radeon unloaded: fbdev,modesetting,vesa 
           resolution: 1366x768~60Hz 
           OpenGL: renderer: AMD TURKS (DRM 2.50.0 / 4.19.0-5-amd64 LLVM 7.0.0) 
           v: 3.3 Mesa 18.2.6 direct render: Yes 
Audio:     Device-1: Intel 7 Series/C216 Family High Definition Audio 
           vendor: Toshiba America Info Systems driver: snd_hda_intel v: kernel bus ID: 00:1b.0 
           Device-2: AMD Turks HDMI Audio [Radeon HD 6500/6600 / 6700M Series] 
           vendor: Toshiba America Info Systems driver: snd_hda_intel v: kernel bus ID: 01:00.1 
           Sound Server: ALSA v: k4.19.0-5-amd64 
Network:   Device-1: Qualcomm Atheros AR9485 Wireless Network Adapter vendor: Lite-On 
           driver: ath9k v: kernel port: 3000 bus ID: 08:00.0 
           IF: wlan0 state: up mac: <filter> 
           Device-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet 
           vendor: Toshiba America Info Systems driver: r8169 v: kernel port: 2000 
           bus ID: 09:00.0 
           IF: eth0 state: down mac: <filter> 
           IF-ID-1: ham_db0fhn state: unknown speed: 10 Mbps duplex: full mac: N/A 
Drives:    Local Storage: total: 670.70 GiB used: 9.70 GiB (1.4%) 
           ID-1: /dev/sda vendor: Intenso model: SSD Sata III size: 223.57 GiB 
           ID-2: /dev/sdb vendor: Toshiba model: Q300. size: 447.13 GiB 
Partition: ID-1: / size: 217.06 GiB used: 9.70 GiB (4.5%) fs: ext4 dev: /dev/sda1 
           ID-2: swap-1 size: 2.00 GiB used: 0 KiB (0.0%) fs: swap dev: /dev/sda2 
Sensors:   System Temperatures: cpu: 58.0 C mobo: N/A gpu: radeon temp: 46 C 
           Fan Speeds (RPM): N/A 
Repos:     Active apt repos in: /etc/apt/sources.list.d/antix.list 
           1: deb http://iso.mxrepo.com/antix/stretch stretch main
           Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list 
           1: deb http://ftp.de.debian.org/debian/ stretch-updates main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/debian.list 
           1: deb http://ftp.de.debian.org/debian/ stretch main contrib non-free
           2: deb http://security.debian.org/ stretch/updates main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/google-chrome.list 
           1: deb [arch=amd64] http://dl.google.com/linux/chrome/deb/ stable main
           Active apt repos in: /etc/apt/sources.list.d/google-earth-pro.list 
           1: deb http://dl.google.com/linux/earth/deb/ stable main
           Active apt repos in: /etc/apt/sources.list.d/google-musicmanager.list 
           1: deb [arch=amd64] http://dl.google.com/linux/musicmanager/deb/ stable main
           Active apt repos in: /etc/apt/sources.list.d/mx.list 
           1: deb http://ftp.halifax.rwth-aachen.de/mxlinux/packages/mx/repo/ stretch main non-free
           No active apt repos in: /etc/apt/sources.list.d/various.list 
Info:      Processes: 208 Uptime: 5m Memory: 7.75 GiB used: 1.02 GiB (13.1%) Init: SysVinit 
           runlevel: 5 Compilers: gcc: 6.3.0 Shell: bash v: 4.4.12 inxi: 3.0.33 

User avatar
kmathern
Developer
Posts: 2409
Joined: Wed Jul 12, 2006 2:26 pm

Re: Abhängigkeit nicht erfüllbar: libc6 (>=2.27)

#4 Post by kmathern »

You might try the 16.04 .deb package (js8call_1.1.0_16.04_amd64.deb) instead of the 18.04 one, it calls for libc6 (>=2.19).

User avatar
Hadschi
Posts: 4
Joined: Wed Jun 26, 2019 2:51 am

Re: Abhängigkeit nicht erfüllbar: libc6 (>=2.27)

#5 Post by Hadschi »

hello and thanks for answering.

i think i did that, without success. i try it again and post it here.

73 heiner

User avatar
Hadschi
Posts: 4
Joined: Wed Jun 26, 2019 2:51 am

Re: Abhängigkeit nicht erfüllbar: libc6 (>=2.27)

#6 Post by Hadschi »

o good shame on you heiner :-))

it run,s well. what i,ve done?

Greetings and will close this tread..heiner

Post Reply

Return to “Deutsches Forum”