Cura 3.1.0/2.7.0
Cura 3.1.0/2.7.0
Wanting to know if this package could placed into the test repo? https://launchpad.net/~thopiekar/+archive/ubuntu/cura
There is no "Ctrl+Z" in life!
Asus X570, Rysen 3600, 32 GB RAM MX-21
Acer 7551G MX-21 & Win 10
Asus i5, 16 GB RAM MX-21 & Win 10
Brother DCP-7065DN/HL-L3270CDW
Linux User# 4523410
Asus X570, Rysen 3600, 32 GB RAM MX-21
Acer 7551G MX-21 & Win 10
Asus i5, 16 GB RAM MX-21 & Win 10
Brother DCP-7065DN/HL-L3270CDW
Linux User# 4523410
Re: Cura 3.1.0/2.7.0
Cura 3.1 is in Debian testing, so that looks like a better source for backporting.
Edit: Got it backported for MX 17, still looking to see how feasible it it for MX 15/16.
Edit: Got it backported for MX 17, still looking to see how feasible it it for MX 15/16.
Re: Cura 3.1.0/2.7.0
This is the error message I get when running from the command line. Just crashes.
I did find a libarcus file from the old PPA and uninstalled it.
I did find a libarcus file from the old PPA and uninstalled it.
You do not have the required permissions to view the files attached to this post.
There is no "Ctrl+Z" in life!
Asus X570, Rysen 3600, 32 GB RAM MX-21
Acer 7551G MX-21 & Win 10
Asus i5, 16 GB RAM MX-21 & Win 10
Brother DCP-7065DN/HL-L3270CDW
Linux User# 4523410
Asus X570, Rysen 3600, 32 GB RAM MX-21
Acer 7551G MX-21 & Win 10
Asus i5, 16 GB RAM MX-21 & Win 10
Brother DCP-7065DN/HL-L3270CDW
Linux User# 4523410
Re: Cura 3.1.0/2.7.0
It looks like Cura needs python3-zeroconf installed, and some pickle related packages. I didn't completely narrow it down but the pickle messages went away after I installed python3-cloudpickle, python3-dill, & python3-jsonpickle. It probably doesn't need cloudpickle, but that's the first one I spotted.
HP Pavillion TP01, AMD Ryzen 3 5300G (quad core), Crucial 500GB SSD, Toshiba 6TB 7200rpm
Dell Inspiron 15, AMD Ryzen 7 2700u (quad core). Sabrent 500GB nvme, Seagate 1TB
Dell Inspiron 15, AMD Ryzen 7 2700u (quad core). Sabrent 500GB nvme, Seagate 1TB
Re: Cura 3.1.0/2.7.0
Installed them and the same results.
There is no "Ctrl+Z" in life!
Asus X570, Rysen 3600, 32 GB RAM MX-21
Acer 7551G MX-21 & Win 10
Asus i5, 16 GB RAM MX-21 & Win 10
Brother DCP-7065DN/HL-L3270CDW
Linux User# 4523410
Asus X570, Rysen 3600, 32 GB RAM MX-21
Acer 7551G MX-21 & Win 10
Asus i5, 16 GB RAM MX-21 & Win 10
Brother DCP-7065DN/HL-L3270CDW
Linux User# 4523410
- Laurentius
- Posts: 96
- Joined: Sat Jan 20, 2018 9:44 pm
Re: Cura 3.1.0/2.7.0
Hello.
Could anyone run cura?
I've installed it via mxpi (test repo) but it crashed, Actualy, it doesent launch,
installed also python3-cloudpickle, python3-dill, & python3-jsonpickle, but did'n launch neither.
Could anyone run cura?
I've installed it via mxpi (test repo) but it crashed, Actualy, it doesent launch,
installed also python3-cloudpickle, python3-dill, & python3-jsonpickle, but did'n launch neither.
Code: Select all
System: Host: mx1 Kernel: 4.19.0-5-amd64 x86_64 bits: 64 compiler: gcc v: 6.3.0
Desktop: Xfce 4.12.3 Distro: MX-18.3_x64 Continuum December 15 2017
base: Debian GNU/Linux 9 (stretch)
Machine: Type: Laptop System: Intel product: Intel powered classmate PC v: Clamshell
serial: <filter>
Mobo: Intel model: Intel powered classmate PC v: Clamshell serial: <filter>
UEFI: Phoenix v: MPBYT10A.88F.0039.2016.0622.1403 date: 06/22/2016
Battery: ID-1: BAT1 charge: 26.1 Wh condition: 32.2/36.6 Wh (88%) model: ECS CMPC
status: Discharging
CPU: Topology: Dual Core model: Intel Celeron N2808 bits: 64 type: MCP arch: Silvermont
rev: 8 L2 cache: 1024 KiB
flags: lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 6330
Speed: 1995 MHz min/max: 500/2249 MHz Core speeds (MHz): 1: 1995 2: 2037
Graphics: Device-1: Intel Atom Processor Z36xxx/Z37xxx Series Graphics & Display
vendor: Elite Systems driver: i915 v: kernel bus ID: 00:02.0
Display: x11 server: X.Org 1.19.2 driver: modesetting unloaded: fbdev,vesa
resolution: 1366x768~60Hz
OpenGL: renderer: Mesa DRI Intel Bay Trail v: 4.2 Mesa 18.2.6 direct render: Yes
Audio: Device-1: Intel Atom Processor Z36xxx/Z37xxx Series High Definition Audio
vendor: Elite Systems driver: snd_hda_intel v: kernel bus ID: 00:1b.0
Sound Server: ALSA v: k4.19.0-5-amd64
Network: Device-1: Realtek RTL8723BE PCIe Wireless Network Adapter driver: rtl8723be v: kernel
port: 2000 bus ID: 01:00.0
IF: wlan0 state: up mac: <filter>
Device-2: Realtek RTL8101/2/6E PCI Express Fast/Gigabit Ethernet
vendor: Elite Systems driver: r8169 v: kernel port: 1000 bus ID: 02:00.0
IF: eth0 state: down mac: <filter>
Drives: Local Storage: total: 465.76 GiB used: 208.23 GiB (44.7%)
ID-1: /dev/sda vendor: Western Digital model: WD5000LPCX-22VHAT0 size: 465.76 GiB
Partition: ID-1: / size: 24.48 GiB used: 8.77 GiB (35.8%) fs: ext4 dev: /dev/sda11
ID-2: /home size: 101.88 GiB used: 35.34 GiB (34.7%) fs: ext4 dev: /dev/sda10
ID-3: swap-1 size: 4.00 GiB used: 0 KiB (0.0%) fs: swap dev: /dev/sda7
Sensors: System Temperatures: cpu: 46.0 C mobo: N/A
Fan Speeds (RPM): N/A
Repos: Active apt repos in: /etc/apt/sources.list.d/antix.list
1: deb http://mirror.cedia.org.ec/mx-workspace/antix/stretch stretch main
Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
1: deb http://ftp.cl.debian.org/debian/ stretch-updates main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://ftp.us.debian.org/debian/ stretch main contrib non-free
2: deb http://security.debian.org/ stretch/updates main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/megasync.list
1: deb https://mega.nz/linux/MEGAsync/Debian_9.0/ ./
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://mirror.cedia.org.ec/mx-workspace/mx/repo/ stretch main non-free
Active apt repos in: /etc/apt/sources.list.d/spotify.list
1: deb http://repository.spotify.com stable non-free
No active apt repos in: /etc/apt/sources.list.d/various.list
Info: Processes: 183 Uptime: 1h 10m Memory: 3.73 GiB used: 1.09 GiB (29.3%) Init: SysVinit
runlevel: 5 Compilers: gcc: 6.3.0 Shell: bash v: 4.4.12 inxi: 3.0.36
Re: Cura 3.1.0/2.7.0
I've been running Cura via their appimage file which works well. The one thing that shows up in the terminal is the error of a lack of fonts in a file, but I can't the specifics off the top of my head. Cura is up to version 4.5 I believe.
I should go back and try this again.
I should go back and try this again.
There is no "Ctrl+Z" in life!
Asus X570, Rysen 3600, 32 GB RAM MX-21
Acer 7551G MX-21 & Win 10
Asus i5, 16 GB RAM MX-21 & Win 10
Brother DCP-7065DN/HL-L3270CDW
Linux User# 4523410
Asus X570, Rysen 3600, 32 GB RAM MX-21
Acer 7551G MX-21 & Win 10
Asus i5, 16 GB RAM MX-21 & Win 10
Brother DCP-7065DN/HL-L3270CDW
Linux User# 4523410
Re: Cura 3.1.0/2.7.0
You do not have the required permissions to view the files attached to this post.
There is no "Ctrl+Z" in life!
Asus X570, Rysen 3600, 32 GB RAM MX-21
Acer 7551G MX-21 & Win 10
Asus i5, 16 GB RAM MX-21 & Win 10
Brother DCP-7065DN/HL-L3270CDW
Linux User# 4523410
Asus X570, Rysen 3600, 32 GB RAM MX-21
Acer 7551G MX-21 & Win 10
Asus i5, 16 GB RAM MX-21 & Win 10
Brother DCP-7065DN/HL-L3270CDW
Linux User# 4523410