cyrilus31 wrote:Il me semble. Quand j'installe un nouveau noyau via l'installateur de paquets, grub garde les entrées pour les autres noyaux.
Tu peux d'ailleurs modifier les entrées avec grub customizer.
re,
c'est exacte, j'ai tjs la possibilité de boot sur le kernel qui était actif lors de l'installation .....
Je sais que c'est une veille machine, mais solide
les info matériel:
Code: Select all
root@mx1:/# inxi -xG
Graphics: Card: Advanced Micro Devices [AMD/ATI] RS480M [Mobility Radeon Xpress 200]
bus-ID: 01:05.0
Display Server: X.Org 1.16.4 drivers: ati,radeon (unloaded: modesetting,fbdev,vesa)
Resolution: 1280x800@60.12hz
OpenGL: renderer: Gallium 0.4 on ATI RS480 version: 2.1 Mesa 12.0.3 Direct Render: Yes
root@mx1:/#
Code: Select all
root@mx1:/# hwinfo --verbose --gfxcard
15: PCI 105.0: 0300 VGA compatible controller (VGA)
[Created at pci.328]
Unique ID: ul7N.md9tTDB7UPF
Parent ID: vSkL.ACMEtsJ5kZE
SysFS ID: /devices/pci0000:00/0000:00:01.0/0000:01:05.0
SysFS BusID: 0000:01:05.0
Hardware Class: graphics card
Model: "ATI Radeon XPRESS 200M 5955 (PCIE)"
Vendor: pci 0x1002 "ATI Technologies Inc"
Device: pci 0x5955 "Radeon XPRESS 200M 5955 (PCIE)"
SubVendor: pci 0x103c "Hewlett-Packard Company"
SubDevice: pci 0x3085
Driver: "radeon"
Driver Modules: "drm"
Memory Range: 0xc0000000-0xcfffffff (ro,non-prefetchable)
I/O Ports: 0x9000-0x9fff (rw)
Memory Range: 0xb0100000-0xb010ffff (rw,non-prefetchable)
Memory Range: 0x000c0000-0x000dffff (rw,non-prefetchable,disabled)
IRQ: 17 (773884 events)
I/O Ports: 0x3c0-0x3df (rw)
Module Alias: "pci:v00001002d00005955sv0000103Csd00003085bc03sc00i00"
Driver Info #0:
XFree86 v4 Server Module: radeon
Driver Info #1:
XFree86 v4 Server Module: fglrx
3D Support: yes
Extensions: dri
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #23 (PCI bridge)
Primary display adapter: #15
root@mx1:/#
Code: Select all
root@mx1:/# hwinfo --verbose --framebuffer
02: None 00.0: 11001 VESA Framebuffer
[Created at bios.459]
Unique ID: rdCR.mrzO17IxmKC
Hardware Class: framebuffer
Model: "ATI MS48"
Vendor: "ATI Technologies Inc."
Device: "MS48"
SubVendor: "ATI MOBILITY RADEON Xpress 200G Series"
SubDevice:
Revision: "01.00"
Memory Size: 516 MB
Code: Select all
root@mx1:/# hwinfo --verbose --cpu
01: None 00.0: 10103 CPU
[Created at cpu.455]
Unique ID: rdCR.j8NaKXDZtZ6
Hardware Class: cpu
Arch: Intel
Vendor: "AuthenticAMD"
Model: 15.31.0 "AMD Sempron(tm) Processor 3000+"
Features: fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,mmx,fxsr,sse,sse2,syscall,nx,mmxext,fxsr_opt,3dnowext,3dnow,rep_good,3dnowprefetch,vmmcall
Clock: 1800 MHz
BogoMips: 3581.72
Cache: 128 kb
Config Status: cfg=new, avail=yes, need=no, active=unknown
root@mx1:/#
Pour en venir au principale, je me demande si c'est possible d'améliorer, ou peut être que cela n'est pas possible.... bref je me pose la question....
Sur pk le cpu est très sollicité en lecture video dans un navigateur, ainsi que le scrolling des pages images et si cela est en rapport avec ceci ?
-) KMS Color Tiling 2D: disabled
-) Fenêtres avec accélération graphique 0/1 Basic
-) window LayerManager Remote false
-) Azure Fallback Canvas Backend none
-) Azure Skia Accelerated 0
-) dans le bios le mode video SidePort uma
Avec l'autre kernel, je suis tjs sous le même serveur X
Current Operating System: Linux mx1 4.10.1-antix.1-486-smp
Code: Select all
[ 196.152]
X.Org X Server 1.16.4
Release Date: 2014-12-20
[ 196.164] X Protocol Version 11, Revision 0
[ 196.167] Build Operating System: Linux 4.9.0-4-amd64 i686 Debian
[ 196.171] Current Operating System: Linux mx1 4.10.1-antix.1-486-smp #4 SMP Mon Feb 27 20:59:13 EET 2017 i686
[ 196.171] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.10.1-antix.1-486-smp root=UUID=2630b494-8ca2-4672-bae9-fa29b58ab472 ro init=/lib/systemd/systemd
[ 196.179] Build Date: 16 October 2017 08:08:13AM
[ 196.183] xorg-server 2:1.16.4-1+deb8u2 (http://www.debian.org/support)
[ 196.187] Current version of pixman: 0.32.6
[ 196.195] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 196.195] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 196.212] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Feb 11 13:06:51 2018
[ 196.217] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 196.221] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 196.249] (--) RADEON(0): Chipset: "ATI Radeon XPRESS 200M 5955 (PCIE)" (ChipID = 0x5955)
[ 196.249] (II) Loading sub module "fb"
[ 196.249] (II) LoadModule: "fb"
[ 196.249] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 196.250] (II) Module fb: vendor="X.Org Foundation"
[ 196.250] compiled for 1.16.4, module version = 1.0.0
[ 196.250] ABI class: X.Org ANSI C Emulation, version 0.4
[ 196.250] (II) Loading sub module "dri2"
[ 196.250] (II) LoadModule: "dri2"
[ 196.250] (II) Module "dri2" already built-in
[ 196.250] (II) Loading sub module "exa"
[ 196.250] (II) LoadModule: "exa"
[ 196.250] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 196.251] (II) Module exa: vendor="X.Org Foundation"
[ 196.251] compiled for 1.16.4, module version = 2.6.0
[ 196.251] ABI class: X.Org Video Driver, version 18.0
[ 196.251] (II) RADEON(0): KMS Color Tiling: enabled
[ 196.251] (II) RADEON(0): KMS Color Tiling 2D: disabled
[ 196.251] (II) RADEON(0): KMS Pageflipping: enabled
Current Operating System: Linux mx1 3.16.0-4-586
Code: Select all
[ 87.369]
X.Org X Server 1.16.4
Release Date: 2014-12-20
[ 87.369] X Protocol Version 11, Revision 0
[ 87.369] Build Operating System: Linux 4.9.0-4-amd64 i686 Debian
[ 87.370] Current Operating System: Linux mx1 3.16.0-4-586 #1 Debian 3.16.51-3 (2017-12-13) i686
[ 87.370] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-586 root=UUID=2630b494-8ca2-4672-bae9-fa29b58ab472 ro quiet init=/lib/systemd/systemd
[ 87.370] Build Date: 16 October 2017 08:08:13AM
[ 87.370] xorg-server 2:1.16.4-1+deb8u2 (http://www.debian.org/support)
[ 87.371] Current version of pixman: 0.32.6
[ 87.371] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 87.371] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 87.372] (==) Log file: "/var/log/Xorg.1.log", Time: Fri Feb 2 18:58:18 2018
[ 87.372] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 87.373] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
87.398] (--) RADEON(0): Chipset: "ATI Radeon XPRESS 200M 5955 (PCIE)" (ChipID = 0x5955)
[ 87.398] (II) Loading sub module "fb"
[ 87.398] (II) LoadModule: "fb"
[ 87.398] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 87.399] (II) Module fb: vendor="X.Org Foundation"
[ 87.399] compiled for 1.16.4, module version = 1.0.0
[ 87.399] ABI class: X.Org ANSI C Emulation, version 0.4
[ 87.399] (II) Loading sub module "dri2"
[ 87.399] (II) LoadModule: "dri2"
[ 87.399] (II) Module "dri2" already built-in
[ 87.399] (II) Loading sub module "exa"
[ 87.399] (II) LoadModule: "exa"
[ 87.399] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 87.399] (II) Module exa: vendor="X.Org Foundation"
[ 87.399] compiled for 1.16.4, module version = 2.6.0
[ 87.399] ABI class: X.Org Video Driver, version 18.0
[ 87.399] (II) RADEON(0): KMS Color Tiling: enabled
[ 87.399] (II) RADEON(0): KMS Color Tiling 2D: disabled
[ 87.399] (II) RADEON(0): KMS Pageflipping: enabled
[ 87.399] (II) RADEON(0): SwapBuffers wait for vsync: enabled
Avec une autre distri pour essayer une version de X plus ancienne, tjs les mêmes problèmes
Current Operating System: Linux slitaz 3.2.98-slitaz
Code: Select all
[ 22.794]
X.Org X Server 1.12.4
Release Date: 2012-08-27
[ 22.794] X Protocol Version 11, Revision 0
[ 22.794] Build Operating System: SliTaz GNU/Linux
[ 22.794] Current Operating System: Linux slitaz 3.2.98-slitaz #4 SMP Fri Feb 2 19:41:43 CET 2018 i686
[ 22.794] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.98-slitaz root=/dev/sda7
[ 22.794] Build Date: 25 February 2017 09:06:19PM
[ 22.794]
[ 22.794] Current version of pixman: 0.32.6
[ 22.794] Before reporting problems, check http://www.slitaz.org/
to make sure that you have the latest version.
[ 22.794] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 22.794] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Feb 11 10:45:22 2018
[ 22.847] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 23.115] (--) RADEON(0): Chipset: "ATI Radeon XPRESS 200M 5955 (PCIE)" (ChipID = 0x5955)
[ 23.115] drmOpenDevice: node name is /dev/dri/card0
[ 23.115] drmOpenDevice: open result is 11, (OK)
[ 23.115] drmOpenByBusid: Searching for BusID pci:0000:01:05.0
[ 23.115] drmOpenDevice: node name is /dev/dri/card0
[ 23.115] drmOpenDevice: open result is 11, (OK)
[ 23.115] drmOpenByBusid: drmOpenMinor returns 11
[ 23.115] drmOpenByBusid: drmGetBusid reports pci:0000:01:05.0
[ 23.115] (II) Loading sub module "fb"
[ 23.115] (II) LoadModule: "fb"
[ 23.115] (II) Loading /usr/lib/X11/modules/libfb.so
[ 23.117] (II) Module fb: vendor="X.Org Foundation"
[ 23.117] compiled for 1.12.4, module version = 1.0.0
[ 23.117] ABI class: X.Org ANSI C Emulation, version 0.4
[ 23.117] (II) Loading sub module "dri2"
[ 23.117] (II) LoadModule: "dri2"
[ 23.118] (II) Loading /usr/lib/X11/modules/extensions/libdri2.so
[ 23.118] (II) Module dri2: vendor="X.Org Foundation"
[ 23.118] compiled for 1.12.4, module version = 1.2.0
[ 23.118] ABI class: X.Org Server Extension, version 6.0
[ 23.118] (II) Loading sub module "exa"
[ 23.118] (II) LoadModule: "exa"
[ 23.118] (II) Loading /usr/lib/X11/modules/libexa.so
[ 23.132] (II) Module exa: vendor="X.Org Foundation"
[ 23.132] compiled for 1.12.4, module version = 2.5.0
[ 23.132] ABI class: X.Org Video Driver, version 12.1
[ 23.132] (II) RADEON(0): KMS Color Tiling: enabled
[ 23.132] (II) RADEON(0): KMS Color Tiling 2D: disabled
[ 23.132] (II) RADEON(0): KMS Pageflipping: enabled
Si vous pouvez juste me donner votre avis et me dire de qu'elle côté chercher ?
Merci a vous