Code: Select all
Driver: HP DeskJet 845C - CUPS+Gutenprint v5.2.10 (color, 2-sided printing)
What version are you using? 3.15.11?Gordon Cooper wrote:Am following this thread with more than little interest. Updated daughter's system from Mepis 11 to MX 15, thought all the correct packages had been loaded but
her HP printer does not work now either.
I cannot say for certain what version you need to use, sorry. All I can say is that version 3.15.11 in the main MX 15 repo is the upgraded version from the 3.14.6 version that is available in vanilla Jessie. This means that the original version from Jessie has been upgraded in the MX repos, which may not be working for you for some reason. All I can suggest is to try the version from Jessie and see if it works for you and report back.joejac wrote:Hello,
Please let me know which version to use because I was trying to install hplip-3.15.4.run but the terminal stuck for more than an hour with - and / rotating and nothing happened.
Regards
joejac
So the printer is working but the problem is: "wrong driver"If you can read this, you are using the wrong driver for your printer
Code: Select all
hp-check -t
Saving output in log file: /home/myuser/hp-check.log
HP Linux Imaging and Printing System (ver. 3.14.6)
Dependency/Version Check Utility ver. 15.1
Copyright (c) 2001-13 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the HPLIP supplied tarball (.tar.gz or
.run) to determine if the proper dependencies are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro supplied package (.deb, .rpm, etc) or
an already built HPLIP supplied tarball has the proper dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode will check both of the above cases
(both compile- and run-time dependencies).
Check types:
a. EXTERNALDEP - External Dependencies
b. GENERALDEP - General Dependencies (required both at compile and run time)
c. COMPILEDEP - Compile time Dependencies
d. [All are run-time checks]
PYEXT SCANCONF QUEUES PERMISSION
Status Types:
OK
MISSING - Missing Dependency or Permission or Plug-in
INCOMPAT - Incompatible dependency-version or Plugin-version
warning: mx distro is not found in AUTH_TYPES
warning: debian-0.0 version is not supported. Using debian-7.5 versions dependencies to verify and install...
---------------
| SYSTEM INFO |
---------------
Kernel: 4.4.0-0.bpo.1-amd64 #1 SMP Debian 4.4.6-1~bpo8+1 (2016-03-20) GNU/Linux
Host: astur
Proc: 4.4.0-0.bpo.1-amd64 #1 SMP Debian 4.4.6-1~bpo8+1 (2016-03-20) GNU/Linux
Distribution: debian 0.0
Bitness: 64 bit
-----------------------
| HPLIP CONFIGURATION |
-----------------------
HPLIP-Version: HPLIP 3.14.6
HPLIP-Home: /usr/share/hplip
warning: HPLIP-Installation: Auto installation is not supported for debian distro 0.0 version
Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.14.6
[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/hplip/HP
ppdbase=/usr/share/ppd/hplip
doc=/usr/share/doc/hplip-doc/HTML
html=/usr/share/doc/hplip-3.14.6
icon=no
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv
bin=/usr/bin
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
libusb01-build=no
pp-build=yes
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=yes
foomatic-ppd-install=yes
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.14.6
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes
policy-kit=yes
lite-build=no
udev_sysfs_rules=no
hpcups-only-build=no
hpijs-only-build=no
Current contents of '/var/lib/hp/hplip.state' file:
Plugins are not installed. Could not access file: No such file or directory
Current contents of '~/.hplip/hplip.conf' file:
[last_used]
device_uri = "hp:/usb/DeskJet_845C?serial=TH2242269F3J"
printer_name = DeskJet_845C_2
working_dir = .
[installation]
date_time = 05/01/16 11:05:05
version = 3.14.6
[settings]
systray_visible = 0
systray_messages = 0
[commands]
scan = /usr/bin/xsane -V %SANE_URI%
[refresh]
rate = 30
enable = false
type = 1
[polling]
enable = false
interval = 5
device_list =
[fax]
voice_phone =
email_address =
[upgrade]
notify_upgrade = false
last_upgraded_time = 1461987825
pending_upgrade_time = 0
latest_available_version = 3.16.3
<Package-name> <Package-Desc> <Required/Optional> <Min-Version> <Installed-Version> <Status> <Comment>
--------------------------
| External Dependencies |
--------------------------
policykit Admin-Policy-framework OPTIONAL - 0.105 OK -
error: gs Ghostscript REQUIRED 7.05 - MISSING 'gs needs to be installed'
network Network-wget OPTIONAL - 1.16 OK -
scanimage Shell-Scanning OPTIONAL 1.0 1.0.24 OK -
avahi-utils avahi-utils OPTIONAL - 0.6.31 OK -
dbus DBus REQUIRED - 1.8.20 OK -
cups CUPS REQUIRED 1.1 1.7.5 OK 'CUPS Scheduler is running'
xsane SANE-GUI OPTIONAL 0.9 0.998 OK -
-------------------------
| General Dependencies |
-------------------------
error: reportlab Python-PDF-Lib OPTIONAL 2.0 3.1.8 MISSING 'reportlab needs to be installed'
libcrypto OpenSSL-Crypto-Lib REQUIRED - 1.0.1 OK -
pil Python-Image-Lib OPTIONAL - 1.1.7 OK -
pyqt4-dbus PyQt4-DBUS REQUIRED 4.0 4.11.2 OK -
libjpeg JPEG-Lib REQUIRED - - OK -
libpthread POSIX-Threads-Lib REQUIRED - 2.19 OK -
python-dbus Python-DBUS REQUIRED 0.80.0 1.2.0 OK -
python-devel Python-SDK REQUIRED 2.2 2.7.9 OK -
pyqt4 Python-Qt4 REQUIRED 4.0 4.11.2 OK -
cups-devel CUPS-SDK REQUIRED - 1.7.5 OK -
sane-devel SANE-SDK REQUIRED - 1.0.24 OK -
libusb USB-Lib REQUIRED - 1.0 OK -
sane Scan-Lib REQUIRED - 1.0.24 OK -
cups-image CUPS-Image-Lib REQUIRED - 1.7.5 OK -
libnetsnmp-devel SNMP-Networking-SDK REQUIRED 5.0.9 5.7.2 OK -
python-xml Python-XML-Lib REQUIRED - 2.1.0 OK -
error: python-notify Desktop-notifications OPTIONAL - - MISSING 'python-notify needs to be installed'
------------------------------
| Compile Time Dependencies |
------------------------------
gcc gcc-Compiler REQUIRED - 4.9.2 OK -
libtool Build-tools REQUIRED - 2.4.2 OK -
make GNU-Build-tools REQUIRED 3.0 4.0 OK -
----------------------
| Python Extentions |
----------------------
cupsext CUPS-Extension REQUIRED - 3.14.6 OK -
pcardext PhotoCard-Extension REQUIRED - 3.14.6 OK -
error: NOT FOUND OR FAILED TO LOAD! Please reinstall HPLIP and check for the proper installation of hpmudext.
error: hpmudext IO-Extension REQUIRED - 3.14.6 MISSING 'Not Found or Failed to load, Please reinstall HPLIP'
-----------------------
| Scan Configuration |
-----------------------
hpaio HPLIP-SANE-Backend REQUIRED - 3.14.6 OK 'hpaio found in /etc/sane.d/dll.conf'
scanext Scan-SANE-Extension REQUIRED - 3.14.6 OK -
------------------------------
| DISCOVERED SCANNER DEVICES |
------------------------------
device `v4l:/dev/video0' is a Noname HP Webcam virtual device
--------------
| PERMISSION |
--------------
-----------
| SUMMARY |
-----------
Missing Required Dependencies
-----------------------------
error: 'ghostscript' package is missing/incompatible
error: 'ghostscript-cups' package is missing/incompatible
error: 'ghostscriptx so thi' package is missing/incompatible
Missing Optional Dependencies
-----------------------------
error: 'python-reportlab' package is missing/incompatible
error: 'python-notify' package is missing/incompatible
Total Errors: 4
Total Warnings: 0
Run 'hp-doctor' command to prompt and fix the issues.
Done.Code: Select all
hp-doctor
Traceback (most recent call last):
File "/usr/bin/hp-doctor", line 37, in <module>
from base import utils, tui, module,queues, os_utils, services, smart_install
File "/usr/share/hplip/base/module.py", line 30, in <module>
import tui, utils, device
File "/usr/share/hplip/base/device.py", line 42, in <module>
import status
File "/usr/share/hplip/base/status.py", line 59, in <module>
import hpmudext
ImportError: /usr/lib/python2.7/dist-packages/hpmudext.so: undefined symbol: hpmud_make_par_uri
I have ghostscript 9.06 so I conclude these packages are incompatible with HPLIPMissing Required Dependencies
-----------------------------
error: 'ghostscript' package is missing/incompatible
error: 'ghostscript-cups' package is missing/incompatible
error: 'ghostscript-x' package is missing/incompatible
Missing Optional Dependencies
-----------------------------
error: 'python-reportlab' package is missing/incompatible
error: 'python-notify' package is missing/incompatible
I like when things begin to work fine by magic, I guess I have to thank to StevoDriver: hp-deskjet_845c.ppd
Driver Version: 3.16.3 (Humm... HPLIP 3.15.11 ?? )
Make and Model: HP Deskjet 845c, hpcups 3.16.3
