I installed MX-17 just before Christmas and like it very much. Unfortunately though, I have been experiencing regular freeze ups at random times. I have installed Alpine, Ranger, Cmus, Calcurse, Deadbeef, Gnuplot and Deluge. I have disabled screensaver and switched off power saving and desktop changer. I have enabled display compositing. Prior to this I was running Debian for a couple of years on the same PC with no issues. I have 4Gb of memory and Conky suggests only a fraction of that being used.
Freeze ups have occurred when using Firefox and when using GIMP. There are no clues in kern.log.
Any ideas?
[SOLVED] Random freezing
[SOLVED] Random freezing
Last edited by csaenemy on Fri Dec 29, 2017 4:07 pm, edited 1 time in total.
Re: Random freezing
My desktop with integrated GeForce 8300 graphics will freeze on any Linux distro after a few hours use unless I install the proprietary nVidia driver. It's absolutely stable under MX with the driver.
If you have nVidia graphics, try that first.
If you don't, then please copy & paste your Quick System Info from MX Tools so we have an idea of what hardware you are running.
If you have nVidia graphics, try that first.
If you don't, then please copy & paste your Quick System Info from MX Tools so we have an idea of what hardware you are running.
HP Pavillion TP01, AMD Ryzen 3 5300G (quad core), Crucial 500GB SSD, Toshiba 6TB 7200rpm
Dell Inspiron 15, AMD Ryzen 7 2700u (quad core). Sabrent 500GB nvme, Seagate 1TB
Dell Inspiron 15, AMD Ryzen 7 2700u (quad core). Sabrent 500GB nvme, Seagate 1TB
Re: Random freezing
Code: Select all
System: Host: mx1 Kernel: 4.13.0-1-amd64 x86_64 bits: 64 Desktop: Xfce 4.12.3
Distro: MX-17_x64 Horizon December 15, 2017
Machine: Device: desktop System: LENOVO product: 90C20005UK v: Lenovo H30-00 serial: N/A
Mobo: LENOVO model: Aptio CRB v: SDK0F82993 WIN serial: N/A
UEFI [Legacy]: LENOVO v: O07KT43AUS date: 08/13/2014
CPU: Quad core Intel Pentium J2900 (-MCP-) cache: 1024 KB
clock speeds: max: 2665 MHz 1: 2415 MHz 2: 2415 MHz 3: 2415 MHz 4: 2415 MHz
Graphics: Card: Intel Atom Processor Z36xxx/Z37xxx Series Graphics & Display
Display Server: x11 (X.Org 1.19.2 ) drivers: modesetting (unloaded: fbdev,vesa)
Resolution: 1920x1080@60.00hz
OpenGL: renderer: Mesa DRI Intel Bay Trail version: 3.3 Mesa 13.0.6
Audio: Card Intel Atom Processor Z36xxx/Z37xxx Series High Def. Audio Controller
driver: snd_hda_intel
Sound: Advanced Linux Sound Architecture v: k4.13.0-1-amd64
Network: Card: Realtek RTL8101/2/6E PCIE Fast/Gigabit Ethernet controller driver: r8169
IF: eth0 state: up speed: 100 Mbps duplex: full mac: c0:3f:d5:ea:f8:01
Drives: HDD Total Size: 4500.9GB (6.9% used)
ID-1: /dev/sda model: WDC_WD5000AAKX size: 500.1GB
ID-2: USB /dev/sdc model: External_USB_3.0 size: 1000.2GB
ID-3: USB /dev/sdd model: External_USB_3.0 size: 3000.6GB
Partition: ID-1: / size: 456G used: 7.6G (2%) fs: ext4 dev: /dev/sda1
ID-2: swap-1 size: 2.15GB used: 0.00GB (0%) fs: swap dev: /dev/sda2
Sensors: System Temperatures: cpu: 41.0C mobo: N/A
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 212 Uptime: 3:07 Memory: 888.3/3846.5MB Client: Shell (bash) inxi: 2.3.53
Re: Random freezing
That particular Intel graphics processor is known to have problems with the modesetting driver that it is currently running.
You can switch to the proper intel driver by creating a 20-intel.conf text file with this in it:Some of the commented out options may improve performance if uncommented, but first let's get it stable. You can try uncommenting them later.
Copy this file to the correct location:then reboot.
Upon booting up, your Quick System Info should now show intel where it used to show modesetting and the lockups should cease.
You can switch to the proper intel driver by creating a 20-intel.conf text file with this in it:
Code: Select all
Section "Device"
Identifier "Device0"
Driver "intel"
# BusID "PCI:0:2:0"
# Option "AccelMethod" "sna"
Option "DRI" "true"
# Option "TearFree" "true"
# Option "DRI" "3"
EndSection
Copy this file to the correct location:
Code: Select all
sudo cp 20-intel.conf /etc/X11/xorg.conf.d/
Upon booting up, your Quick System Info should now show intel where it used to show modesetting and the lockups should cease.
HP Pavillion TP01, AMD Ryzen 3 5300G (quad core), Crucial 500GB SSD, Toshiba 6TB 7200rpm
Dell Inspiron 15, AMD Ryzen 7 2700u (quad core). Sabrent 500GB nvme, Seagate 1TB
Dell Inspiron 15, AMD Ryzen 7 2700u (quad core). Sabrent 500GB nvme, Seagate 1TB
Re: Random freezing
Thank you for this. I have done as you suggest and will give it a day or two. All being well I will be marking as solved in due course.
Re: Random freezing
Unfortunately crashed after 22 minutes with no programs running.
Re: Random freezing
Since your processor is a Bay Trail model, this may be the solution to your freezes.afterwards, then reboot.
The kernel option is added to the GRUB_CMDLINE_LINUX_DEFAULT= line in /etc/default/grub file - separated from anything prior on the line by a space and inside the quotes. This will have to be done using right-click "Edit as root". RunArchwiki wrote:Baytrail complete freeze
If you are using kernel > 3.16 on Baytrail architecture and randomly encounter total system freezes, the following kernel option is a workaround until this bug is fixed in the linux kernel.
intel_idle.max_cstate=1
This is originally an Intel CPU bug that can be triggered by certain c-state transitions. It can also happen with Linux kernel 3.16 or Windows, though apparently much more rarely. The kernel option will prevent the freeze by avoiding c-state transitions but will also increase power consumption.
Code: Select all
sudo update-grub
HP Pavillion TP01, AMD Ryzen 3 5300G (quad core), Crucial 500GB SSD, Toshiba 6TB 7200rpm
Dell Inspiron 15, AMD Ryzen 7 2700u (quad core). Sabrent 500GB nvme, Seagate 1TB
Dell Inspiron 15, AMD Ryzen 7 2700u (quad core). Sabrent 500GB nvme, Seagate 1TB
Re: Random freezing
I will bear this in mind.
I tried removing the # from before:
in the 20-intel.conf file and so far no freezing for 22 hours. I don't know whether it's made a difference, or why it should have, but am keeping my fingers crossed.
I tried removing the # from before:
Code: Select all
Option "AccelMethod" "sna"